Help me please!!! Post suggetsions in either forum... Thanx..

http://forums.maxima.org/showthread.php?t=479370


Deac

 

Seems like no one can help. Your best bet would probably be to join a 350z/ EVO/ or WRX forum and post up the same question. Since there are maybe 100+ more people running boost with e-manage over there, someone may be able to help.

 

You can at least call the numbers to find out if they can help out with emanage. I got these off honda-tech.com. I was able to find a shop in my area as well.

RPM NYC
-217-85 98th Avenue
-Queens Village, New York 11428
-tel: 718-740-3277
-fax: 718-740-1331
-http://www.rpmnyc.com
-Hondata/Motec/Apexi/Aem...
-they are good @ what they do...im a very happy customer

NRG-tech
-214A North Fehr Way
-North Bay Shore NY, 11706
-Phone (631) 243-6NRG (6674)
-Fax (631) 243-5NRG (5674)
-All ECUs/roll cages/custom fabrication/engine builds/custom wiring
-http://www.nrgtechracing.com

T&R Racing
-94-36 Merrick Blvd
-Queens, NY 11432
-http://www.rx7s.com
-UBERDATA, HALTECH, APEX-i (FASV,VAFC,Power FC), soon to be HONDATA
-Phone (718) 725-0179
-Fax (718) 725-1183
-We tune on a DYNOJET with dynojet Wideband Build almost everything.
-Specialize in Honda's and RX7's

Innovative Tuning
-2756 Transit Rd.
-West Seneca, NY 14224
-(Buffalo - Western NY Area) Also offer traveling tuning around the world.
-http://tuning@InnovativeTuning.com
-Phone: 716-674-2334
-http://www.InnovativeTuning.com
-AEM EMS Certified, Haltech, Autronic, Chrome, Ubderdata, KPro, E-manage, S-AFC/VAF-C, PowerFC, etc.
-In house variable load chassis dyno with wideband. Also offer street tuning by request.

Enzo Racing
-5 Madison Ave
-North Bay Shore, NY 11706
-Phone 631-525-5151
-http://www.enzo-racing.com
-Engine management & data acquisition, Custom Fabrication, Dyno Dynamics Chassis Dyno
-Specializing in Autronic

Synapse Motorsports
-40 Komar Drive
-Charlton, N.Y. 12019
-518-470-2748
-http://www.synapsemotorsport.com
-Dyna Pak Dyno, Factory AEM Trained, Hondata Tuning

New Jersey if it somehow closer.
New Jersey

Xenocron Tuning Solutions, Inc.
http://www.xenocron.com
973-338-5252
Bloomfield, NJ (15 minutes from NYC)
NJ/NY/CT/PA/MD
Crome PRO / TurboEdit / BRE / Hondata / EMS & more...
Email:chrisharris@xenocron.com

Walnuts Tuned - Shaun Clark
- NJ/PA/DE
-Crome Dealers License, Turboedit, Uberdata
-HT/AIM- Shauniewalnuts
-email - shaun311@comcast.net

Tuner directory from honda-tech.com

 

Went to RPM's website. They have E-manage listed up there. Should probably check them out or give them a call.

Mike

 

For somebody from Washington, you found alot of info for shops in the NYC area! I'll check some of these out. Thanx again.

Deac

 

RPM quoted me $600 total to dyno tune the EU. loos like they do most the low end in the streets with a wideband and then they do top end on the dyno for about an hour or two. These guys make Evan's tuning price of $500 for the entire day seem like a deal. But Evan's tuning doesn't do EU.

 

I'd like to the EU wired up adn that fix done that Dandy was talking about, I have the E-Blue all wired up already so its not a complete install its just a conversion to the EU with the harness. I dont know how to do it and no one seems to have a 5th Gen pinout available for me to at least try it myself.... I was hoping someone can at least help me wire it up! Any suggestions people?


Deac

 

I can'r seem to find it but SR20DEN has a pinout. I have it saved on my computer if you want it i'll send it to you.

 

GREAT!!! If you have a 5th Gen pinout, That would be great. I have a local guy that can help me wire it up if we have the pinout.

As far as that diode fix goes.... where you open the EU up and solder something or the other, Will Greddy do that for free if we send it back to them? Or does anyone on here do the fix if we mail the EU to them?

Deac

 

Download the FSM from phatg20.net
On the EU you add resistors, not diodes.

 

Thanx for the info but... is there a link to the part of that site that has the resistor fix? Ijust looked through the site and I could'nt fine the write up on installing resistors on the EU.


Deac

 

That site is where you get the FSM.

 

You donated... SEARCH. Search for the word resistor in this forum.