Where are you getting your turbo manifold exhaust flanges?
09-15-2006, 03:41 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Posts: 28
Where are you getting your turbo manifold exhaust flanges?
I am planning to build a set of turbo manifolds out of mild steel and it would make my life much easier if I could find decently thick exhaust head flanges already cut.
09-15-2006, 04:04 PM
#2
almost no one is using manifolds that start at the heads. the only one i know of is maxmaxima91. he made his on the CNC machine at his house. everyone else I know of is starting their "turbo piping" where the stock manifolds end, eliminating the need to have head flanges.
09-15-2006, 07:18 PM
#4
Originally Posted by SPiG
You would have to find some made for 350Z headers or you would have to custom CNC it.
OR...you could also buy the SS autochrome units. Not my personal reccomendation, but they could definitely be used.
09-16-2006, 09:58 AM
#5
Junior Member
Thread Starter
Join Date: Aug 2006
Posts: 28
Well that explains why I was having such a hard time finding threads about this.
It wouldn't be too terrible to cut some using gaskets as a layout. I just have to find a plasma cutter I could borrow for an hour or two.
It wouldn't be too terrible to cut some using gaskets as a layout. I just have to find a plasma cutter I could borrow for an hour or two.
09-18-2006, 08:36 PM
#9
Newbie - Just Registered
Join Date: Aug 2006
Posts: 3
e-mail me
Brandon@balisticmotors.com
I do mostly vq30det stuff in sandrails but the flanges are the same
brandon
Brandon@balisticmotors.com
I do mostly vq30det stuff in sandrails but the flanges are the same
brandon
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM