PICS: 4th Gen with JDM Nissan Gloria VQ30DET
#42
Originally Posted by BlackBIRDVQ
Props on getting the motor in..... but the red looks out of place. I would be ashamed to open the hood if my engine bay looked THAT messy.
Good thing your not him. Don't fret, nobody opens their bay in BK.
#43
Sounds like a cylinder or two aren't firing. Clogged injectors are typical of junkyard motors that have been sitting around for a while.
Good to see it up and running though.
Good to see it up and running though.
#47
Originally Posted by tavarish
....only a matter of time before someone realizes the manifolds bolt on to a 3.5.
I'm excited to see what this will do for 3.5's and whether or not 5.5 gen people will stop their whining about no available turbo stuff
#49
Originally Posted by JeEvE
Congrats on the swap.
As nismology already said, it definitely sounds like the motor is missing but it should be easily fixable.
As nismology already said, it definitely sounds like the motor is missing but it should be easily fixable.
#51
About a month ago I told some one this swap would take too much labor & fabrication.. on the other hand i've never been so happy to be proven wrong. Great job & hats off to "TRAFFIC BLOCKIN"
#52
I knew it could be done... way back, way way back... the Nissan Mechanic that I use to go to, told me if I wanted to go turbo, to just swap a Nissan "Gloria" engine... never knew what he met by that... until researched it way way later... I would like to see some numbers....
#53
Originally Posted by accordingtou
About a month ago I told some one this swap would take too much labor & fabrication.. on the other hand i've never been so happy to be proven wrong. Great job & hats off to "TRAFFIC BLOCKIN"
It's jdm cool, but I want to see it run.
Nice job Traffic Blockin.
#54
I was going to start the post of by telling most of MAXIMA.ORG to go FUKK them selves but then i thought i would be no better then them. So let me just say thank you to all my hatter friends out there that made me want to do this project even more and more..Its kinda funny know that i put it out there that I've done the swap none of the people that were negative about the whole thing being done have posted in this thread .. Well those are the ones that can go fukk them selves...:
I am the one that have started threads like (QUESTION ABOUT THE VQ30DET MOTOR) and many more in the past and every time they just got shut down by know it alls.....But for you guys out there that have been giving my swap nothing but positive feedback thank you very much......But for guys like NEALOC17 & JCY98MAXSE that tried to talk down to me and had nothing positive to say about this swap you guys surely are silent now. LMAO....
Now about the swap . My engine bay looks like sh7t right know do to the fact that this is the second setup . The reason why this is my second setup is because my car was stripped b4 they stole all my parts turbo, wastegate, fmic, everything that u can think of that had to do with boost was taken the only thing that was left was the motor thank god... The engine bay did not look nothing like that b4 it was nice and clean and every thing was nice a neat..As you can see from the receipt i had this motor in my car from last year... This is why i never posted about the swap and why most people from NY don't post about what the have under there hood .... The car ran fine the first time around .... Now it was giving me a Lil problem but know it is fixed .It was missing in the video that TJ toke one of the coil pack wires was disconnected.
I am the one that have started threads like (QUESTION ABOUT THE VQ30DET MOTOR) and many more in the past and every time they just got shut down by know it alls.....But for you guys out there that have been giving my swap nothing but positive feedback thank you very much......But for guys like NEALOC17 & JCY98MAXSE that tried to talk down to me and had nothing positive to say about this swap you guys surely are silent now. LMAO....
Now about the swap . My engine bay looks like sh7t right know do to the fact that this is the second setup . The reason why this is my second setup is because my car was stripped b4 they stole all my parts turbo, wastegate, fmic, everything that u can think of that had to do with boost was taken the only thing that was left was the motor thank god... The engine bay did not look nothing like that b4 it was nice and clean and every thing was nice a neat..As you can see from the receipt i had this motor in my car from last year... This is why i never posted about the swap and why most people from NY don't post about what the have under there hood .... The car ran fine the first time around .... Now it was giving me a Lil problem but know it is fixed .It was missing in the video that TJ toke one of the coil pack wires was disconnected.
#55
Contrary to what some people might think the car is running on a stock maxima ecu wire harness. and the maff that came with the motor witch is the same as the maxima maff.... Some one said that it wouldn't be Worth it if this swap couldn't be done if it couldn't be done 4 less the 2k. That it would make more since to just to get custom pistons and rods 4 the stock vq30de. If these people ever got to see inside on of these motors like i have they wouldn't be saying that remember its a turbocharged motor lol.... This is funny cuz i have thousands of dollars in this project and i would say that it coast me about $1500 to actually get the motor in the car the rest was in upgrades, turbo,piping,clutch,etc u guys should get the point $1000 for the motor and $500 in fabrication but don't get things twisted guys its not a cheap project there was alot more then just getting it in the car.... and u lose alot of your goodies lol i cat tell you what i mean by that those who know me know what I'm talking about...
I will answer some questions not all so don't get mad if i dint answer yours its not personal i just not going to give the next person an easy way out you cant be mad at me for that.....
I will post dyno numbers and boost in a week or so the car is on stock ecu right now so i don't expect to get much out of it but I'm working on a custom EMS right now coming very soon so i can get the full feel of this motor..
To my great friend NELOC187 since you were the one that gave me the most sarcastic feedback during this swap I'm going to target you
Don't worry though i know that you are going and some of your maxima bend over buddies are pushing you to be the first maxima 2 hit 10's don't worry about it i will let you have that glory I'm not shooting for that i m shooting for the most horse power on just boost alone know juice ... and not blow up like Hal no disrespect to him i just want to make the power and keep it for a while that's my goal so don't get scared,,
P.S you better hurry up thought i might get Bord quick and just take that dream right from under you...........LMAO
I will answer some questions not all so don't get mad if i dint answer yours its not personal i just not going to give the next person an easy way out you cant be mad at me for that.....
I will post dyno numbers and boost in a week or so the car is on stock ecu right now so i don't expect to get much out of it but I'm working on a custom EMS right now coming very soon so i can get the full feel of this motor..
To my great friend NELOC187 since you were the one that gave me the most sarcastic feedback during this swap I'm going to target you
Don't worry though i know that you are going and some of your maxima bend over buddies are pushing you to be the first maxima 2 hit 10's don't worry about it i will let you have that glory I'm not shooting for that i m shooting for the most horse power on just boost alone know juice ... and not blow up like Hal no disrespect to him i just want to make the power and keep it for a while that's my goal so don't get scared,,
P.S you better hurry up thought i might get Bord quick and just take that dream right from under you...........LMAO
#57
Hats off to you Scoop... Nice swap, but it was done before on a black 97'. VQ power or some other site had a write up on the whole swap.
But still, very nice work my friend!!!!!!!
But still, very nice work my friend!!!!!!!
#58
Originally Posted by Ghase
Hats off to you Scoop... Nice swap, but it was done before on a black 97'. VQ power or some other site had a write up on the whole swap.
But still, very nice work my friend!!!!!!!
But still, very nice work my friend!!!!!!!
if im not mistakin my friend it was just the heads but if for some reason i missed that witch i dont think i did hats of to them and im glade to follow in there foot steps
#59
http://www.dynomagic.com/images/othe...nifold%202.jpg
was it this one if not can you find out were u seen this swap done i would reall like to see it cuz i searched up and down and asked questions everywere and got nothing so its kinda crazy that you seen it done b4 not to say that its not true but alot of people told me that it couldnt be done and i hasnt been done .... so if u can find that for my that would be a good look
was it this one if not can you find out were u seen this swap done i would reall like to see it cuz i searched up and down and asked questions everywere and got nothing so its kinda crazy that you seen it done b4 not to say that its not true but alot of people told me that it couldnt be done and i hasnt been done .... so if u can find that for my that would be a good look
#60
hell yeah scoop, cant wait to see this beast. I'm done posting things I do to my car, and people saying this and that. Im just posting a dyno, and they can figure out the rest for themselves lol.....hopefully I'll see this thing next weekend.
#61
Originally Posted by bkmaxima
I was going to start the post of by telling most of MAXIMA.ORG to go FUKK them selves but then i thought i would be no better then them. So let me just say thank you to all my hatter friends out there that made me want to do this project even more and more..Its kinda funny know that i put it out there that I've done the swap none of the people that were negative about the whole thing being done have posted in this thread .. Well those are the ones that can go fukk them selves...:
#62
I don't suppose we'll get an explaination on how he dealt with actually installing the RWD blocked motor into the maxima would we? ie.. diff engine mount locations (if that was the case).
I thought Tilley had a VQ30DET some years ago and look into this? And ran basicly all VQ30DET internals in a FWD block? But ran custom manifolds
edit. Unless someone can give my a logical anwer preferably in english, then go ahead and pass on replying to this. Grats.
I thought Tilley had a VQ30DET some years ago and look into this? And ran basicly all VQ30DET internals in a FWD block? But ran custom manifolds
edit. Unless someone can give my a logical anwer preferably in english, then go ahead and pass on replying to this. Grats.
#63
LISTEN UP. I'm going to lock this thread for 24 hours. When it is reopened tomorrow, everyone WILL behave in a civilized, productive matter, or you will no longer be welcomed on these forums. After this post, I want no more bickering or mention of past arguments in this thread. Get along or get out. You will not get a warning. Walk away and come back in 24 hours.
#64
Thread is reopened. Start the bickering again and it will be locked for good. Start e-thugin again and it will be locked for good. I consider "if you want to meet somewhere and talk about this" to be e-thuging, just in case someone doesn't understand what that means. Keep the "on the down low son, we be out for a hizzle shizzle blah blah blah crap" to yourselves. If your not sure, then don't post it. Let's move on and have a productive post. That is all.
#65
Originally Posted by Jeff92se
I don't suppose we'll get an explaination on how he dealt with actually installing the RWD blocked motor into the maxima would we? ie.. diff engine mount locations (if that was the case).
I thought Tilley had a VQ30DET some years ago and look into this? And ran basicly all VQ30DET internals in a FWD block? But ran custom manifolds
edit. Unless someone can give my a logical anwer preferably in english, then go ahead and pass on replying to this. Grats.
I thought Tilley had a VQ30DET some years ago and look into this? And ran basicly all VQ30DET internals in a FWD block? But ran custom manifolds
edit. Unless someone can give my a logical anwer preferably in english, then go ahead and pass on replying to this. Grats.
I thought the same thing when this thread came out, but I never cared to post about it. I think i have pictures somewhere.
#66
Originally Posted by mtrai760
. "on the down low son, we be out for a hizzle shizzle blah blah blah crap"
On a serious note, I am very interested in some more information on this swap. Have anything to add about the mounting points? Timing chain cover? Is it still running rich?
#67
Originally Posted by Nealoc187
I just did a quick search and this is the only thing I came up with that might explain why you are so pissed off at me?
http://forums.maxima.org/search.php?searchid=568873
one sarcastic post is all it takes to get you that riled up that you want to "meet me at maxus 07" etc? I think you need to take a step back and realize how ridiculous that is.
In all seriousness, I'm sure I made that post based on the fact that your first post made it sound like you didn't know what you were getting into - THAT is why I made a sarcastic post. Honestly, I don't know the first damn thing about putting a DET into a maxima and I think it is sweet that you completed it. Obviously I was wrong when I ASSumed that you couldn't handle what you were talking about in that post. I was dead fcking wrong with that assumption and I don't have a problem admitting that. It's happened before and it'll surely happen again.
I do want to clarify though - I was NEVER saying that what you wanted to do could not be done. I know a guy putting a VQ into an airplane and I know a guy who has a VG powered RWD civic - ANYTHING can be done by someone who has the desire and the know-how. Never have I uttered the words "it's impossible". Anything is possible, some things just require more skills and ability than certain people possess.
http://forums.maxima.org/search.php?searchid=568873
one sarcastic post is all it takes to get you that riled up that you want to "meet me at maxus 07" etc? I think you need to take a step back and realize how ridiculous that is.
In all seriousness, I'm sure I made that post based on the fact that your first post made it sound like you didn't know what you were getting into - THAT is why I made a sarcastic post. Honestly, I don't know the first damn thing about putting a DET into a maxima and I think it is sweet that you completed it. Obviously I was wrong when I ASSumed that you couldn't handle what you were talking about in that post. I was dead fcking wrong with that assumption and I don't have a problem admitting that. It's happened before and it'll surely happen again.
I do want to clarify though - I was NEVER saying that what you wanted to do could not be done. I know a guy putting a VQ into an airplane and I know a guy who has a VG powered RWD civic - ANYTHING can be done by someone who has the desire and the know-how. Never have I uttered the words "it's impossible". Anything is possible, some things just require more skills and ability than certain people possess.
All Im going to say is let bygone be bygones and move on....
#69
Originally Posted by boostlogic
On a serious note, I am very interested in some more information on this swap. Have anything to add about the mounting points? Timing chain cover? Is it still running rich?
Everything was custome made...as far as timing chain cover its the same one that came on the motor if thats what you are asking ,,, it just has one less hole on it do to the fact that it was not used for mouting in the rwd setup aposed to the way its used in our cars same way that that stock vq30de is.... the car is no longer running rich... for some strange reason i was dumping a crazy amout of fuel ... i was idlein at 10.0 a/f crazy as hell now im at about 15.4 or something like that havent really tuched the car much this weekend.....i plane on getting my ems put together by this weekend but i will try to dyno it b4 any after the install.. dont know what else you guyz want to know but i will answer questions if you ask ......... But please dont get mad if i dont answer some im just not going to put it all out there
#71
Originally Posted by Nealoc187
Did you do any custom engine mount fabrication for one or more of the engine mounts? That is the biggest thing I would wonder about.
We all know that i had to do some form of engine mount fab work do to the fact the place for the mounts on the det block are in totaly diffrent places... i rather not say how they were built but i did have to fabricate the mounts ... sorry if that doesnt answer your question but im im the process of making these for anyone that wants to do this swap not sure how thats going to work out so i cant put full detail out there ... hope you guyz understand but u can keep the questions comin
#72
Originally Posted by bkmaxima
We all know that i had to do some form of engine mount fab work do to the fact the place for the mounts on the det block are in totaly diffrent places... i rather not say how they were built but i did have to fabricate the mounts ... sorry if that doesnt answer your question but im im the process of making these for anyone that wants to do this swap not sure how thats going to work out so i cant put full detail out there ... hope you guyz understand but u can keep the questions comin
That's cool I wasn't expecting you to post up exactly what had to be done, just if it had to be done. I've never seen a DET out of a car, only in a couple RWD cars so I don't know what the mount setup looks like.
#73
Ok, can we be speculative and hypothetical now? LOL, What is this car capable of, i'll even take theoretical terms. Handle A LOT more boost? A lot more power at medium boost levels? As bkmaxima would say "come on boost gurus" lol.
#76
Originally Posted by liqidvenom
it sounds like he is planning on selling a kit of some sorts so then i understand why he is being hush hush about it.
dont these motors put out around 280/280 oem?
dont these motors put out around 280/280 oem?
we have a winnnnaahhhh
#77
Originally Posted by Kevlo911
Yup
o damn...
i read the thread but now what would be the benefits from using the DET instead of the 3.5, then goin turbo? it seems like its a ton of work between making new mounts, etc. but maybe im wrong about the DETty?