so im looking for advice on a clutch upgrade. ive found that 85-99 manuals all have interchangable clutch/pressure plate assemblies. what have you guys had good luck with?

 

I ran southbend with good results and now on a spec but haven't drove with the spec yet. I actually used a z31 clutch this time around just due to it laying on the shelf in the box.

 

is the Z31 clutch a direct fit? 240mm or 250mm? my friend at orielly could warranty my current lifetime clutch and ai could upgrade to a Z31 clutch for almost nothing out of pocket. i know the turbo clutches are good for 340lbs of torque, i dont know about the NA clutches. any help would be greatly appreciated. even tho my car is an 88, im using a 91 flywheel, clutch and pressure plate. so whatever fit yours would also fit mine.

 

I had a Spec stage III IN MY '89 Turbo. Absolutely perfect, no issues or complaints.

 

how high of torque are we talking about here?

 

ill need something thats good for over 350lbs of torque.

 

Was pretty much direct swap. I believe I had to just slightly enlarge the alignment pin. Wouldn't quite slip on my flywheel with paint etc. Did use the maxima throw out bearing.