Introducing ICHIBA USA Hubcentric Aluminum Wheel Spacers
Introducing ICHIBA USA Hubcentric Aluminum Wheel Spacers
We do have the wheel spacers for Maxima owners.
Here is how you can measure the size and the size convertor.
The widest point of your tire and wheel combination is usually the outside diameter of the tire sidewall. Using a ruler with the straight edge flush with the face of the tire, measure the gap between the outer face of the tire to the inside lip of the fender as shown in the diagram. This will determine the thickness of the spacer you will need.
5MM = 0.197 INCH
15MM = 0.590 INCH
20MM = 0.787 INCH
25MM = 0.983 INCH
If you are interested to get wheel spacers, click here to "Group Deals / Sponsors Forum"
Here is how you can measure the size and the size convertor.
The widest point of your tire and wheel combination is usually the outside diameter of the tire sidewall. Using a ruler with the straight edge flush with the face of the tire, measure the gap between the outer face of the tire to the inside lip of the fender as shown in the diagram. This will determine the thickness of the spacer you will need.
5MM = 0.197 INCH
15MM = 0.590 INCH
20MM = 0.787 INCH
25MM = 0.983 INCH
If you are interested to get wheel spacers, click here to "Group Deals / Sponsors Forum"
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
Mar 12, 2020 12:06 AM
