LA FS: Ace alloy 20x9 wheels with Nitto Invo tires
10-05-2014, 10:09 AM
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Nov 2004
Location: Baton Rouge, LA
Posts: 5,432
FS: Ace alloy 20x9 wheels with Nitto Invo tires
For sale:
-Ace Alloy Convex wheels (4) - 20"x9" with a +45mm offset. 5x114.3 bolt pattern. Matte silver color.
-Nitto Invo tires (4) - 245/35/20 tire size. TPMS sensors are installed.
Condition: 2 of the wheels are in perfect condition - no blemishes. 2 of them had an unfortunate meeting with a curb. I've gotten rid of the burrs and from most angles it's hardly noticable, but it is there. See pictures below. The tires were on my car for approximately 4,000 miles and the tread is like new. There is a blemish on the sidewall on one of the damaged wheels.
Location: New Orleans, LA
Price: $1,700 shipped within the lower 48
These wheels were on my 2013 accord coupe and I'm unsure of the hub bore size, but I do know that they will clear nissan's 66.1mm center bore. They have hub centric rings on there now for my accord's 64.1mm bore size. I also have a full set of lug nuts and gorilla locks but unfortunately, they won't work for nissans - they have a M12x1.5 thread. The car rode perfectly smooth so no need for balancing once you get them - just install. The reason I'm selling these is because I'm listing my accord for sale since I just ordered a new 335i.
Wheel #1 - Around 8" of curb rash
Wheel #2 - Perfect
Wheel #3 - Perfect
Wheel #4 - Around 1 1/2" of curb rash with sidewall blemish
All 4 tires:
How they looked on my car:
-Ace Alloy Convex wheels (4) - 20"x9" with a +45mm offset. 5x114.3 bolt pattern. Matte silver color.
-Nitto Invo tires (4) - 245/35/20 tire size. TPMS sensors are installed.
Condition: 2 of the wheels are in perfect condition - no blemishes. 2 of them had an unfortunate meeting with a curb. I've gotten rid of the burrs and from most angles it's hardly noticable, but it is there. See pictures below. The tires were on my car for approximately 4,000 miles and the tread is like new. There is a blemish on the sidewall on one of the damaged wheels.
Location: New Orleans, LA
Price: $1,700 shipped within the lower 48
These wheels were on my 2013 accord coupe and I'm unsure of the hub bore size, but I do know that they will clear nissan's 66.1mm center bore. They have hub centric rings on there now for my accord's 64.1mm bore size. I also have a full set of lug nuts and gorilla locks but unfortunately, they won't work for nissans - they have a M12x1.5 thread. The car rode perfectly smooth so no need for balancing once you get them - just install. The reason I'm selling these is because I'm listing my accord for sale since I just ordered a new 335i.
Wheel #1 - Around 8" of curb rash
Wheel #2 - Perfect
Wheel #3 - Perfect
Wheel #4 - Around 1 1/2" of curb rash with sidewall blemish
All 4 tires:
How they looked on my car:
01-11-2015, 03:24 AM
#2
Surprised no one bit on these. I run these staggered on a Lexus GS (3rd gen) and I just bought a 7th gen Maxima (coming from the 6th gen). These wheels get compliments routinely. Offset may be a little high for what these guys seem to run on the 7th gen from what I'm reading, but a spacer can cure that easy enough. Either way, these wheels look good and I'm considering mounting them on the max when it warms up. If i do, and your sale isn't up, I will take a few pics for you and add to your thread. FYI center bore on these wheels is 72.6mm so an org member would have to find the corresponding hub rings as you said. FWIW, these wheels are durable as hell for a cast wheel. I hit a few craters at highway speed in a 35 profile tire and thought for sure the wheel was bent/crack but not at all and that was 3 summers ago. GLWS bro
Thread
Thread Starter
Forum
Replies
Last Post
