Power Loss at High RPMs
#1
Power Loss at High RPMs
My Maxima loses power somwhere around 4,000 RPMs. I notice the car is acelerating then it hits a certain point and nothing. I actually have to let off the accelerator sometimes just to get it to change gears.
It has 89,000 miles on it and I just changed the plugs a few weeks ago (hoping that would fix the problem).
I was thinking it might be the MAF but most people who replaced the MAF also had stalling problems and I don't have that.
Anyone have any ideas what this could be?
It has 89,000 miles on it and I just changed the plugs a few weeks ago (hoping that would fix the problem).
I was thinking it might be the MAF but most people who replaced the MAF also had stalling problems and I don't have that.
Anyone have any ideas what this could be?
#4
#5
Originally Posted by Cdoc
My Maxima loses power somwhere around 4,000 RPMs. I notice the car is acelerating then it hits a certain point and nothing. I actually have to let off the accelerator sometimes just to get it to change gears.
It has 89,000 miles on it and I just changed the plugs a few weeks ago (hoping that would fix the problem).
I was thinking it might be the MAF but most people who replaced the MAF also had stalling problems and I don't have that.
Anyone have any ideas what this could be?
It has 89,000 miles on it and I just changed the plugs a few weeks ago (hoping that would fix the problem).
I was thinking it might be the MAF but most people who replaced the MAF also had stalling problems and I don't have that.
Anyone have any ideas what this could be?
#6
Guys.. note the year of the car: 2K
Two guesses: MAF or variable intake is NOT opening as it should.
My car hung up between gears when the MAF was bad. It did NOT stall or throw any codes. The engine pulled from idle to around 3500 RPMS where it almost hit a wall. I could baby it up to 5000 RPMS but it felt like someone tied something heavy to the back. Let off the gas and it would shift only to do the same thing again. Kept the Revs below 3500 and is was drivable.
Two guesses: MAF or variable intake is NOT opening as it should.
My car hung up between gears when the MAF was bad. It did NOT stall or throw any codes. The engine pulled from idle to around 3500 RPMS where it almost hit a wall. I could baby it up to 5000 RPMS but it felt like someone tied something heavy to the back. Let off the gas and it would shift only to do the same thing again. Kept the Revs below 3500 and is was drivable.
#7
Originally Posted by HerBlue2kSE
Guys.. note the year of the car: 2K
Two guesses: MAF or variable intake is NOT opening as it should.
My car hung up between gears when the MAF was bad. It did NOT stall or throw any codes. The engine pulled from idle to around 3500 RPMS where it almost hit a wall. I could baby it up to 5000 RPMS but it felt like someone tied something heavy to the back. Let off the gas and it would shift only to do the same thing again. Kept the Revs below 3500 and is was drivable.
Two guesses: MAF or variable intake is NOT opening as it should.
My car hung up between gears when the MAF was bad. It did NOT stall or throw any codes. The engine pulled from idle to around 3500 RPMS where it almost hit a wall. I could baby it up to 5000 RPMS but it felt like someone tied something heavy to the back. Let off the gas and it would shift only to do the same thing again. Kept the Revs below 3500 and is was drivable.
Sounds like the exact same problem I'm having! I was torn between just replacing the MAF and bringing it into the dealership. But I think your post convinces me to at least try the MAF. I'll try replacing it tomorrow night (if they have it in stock).
Did you manually reset your ECU, have the dealer reprogram the ECU for the new MAF or just install the MAF and nothing else?
#8
Originally Posted by Cdoc
Did you manually reset your ECU, have the dealer reprogram the ECU for the new MAF or just install the MAF and nothing else?
Enjoy your faster Maxima
#10
Originally Posted by Cdoc
Sounds like the exact same problem I'm having! I was torn between just replacing the MAF and bringing it into the dealership. But I think your post convinces me to at least try the MAF. I'll try replacing it tomorrow night (if they have it in stock).
Did you manually reset your ECU, have the dealer reprogram the ECU for the new MAF or just install the MAF and nothing else?
Did you manually reset your ECU, have the dealer reprogram the ECU for the new MAF or just install the MAF and nothing else?
The dealer did reprogram the ECU while they had the car.
Travis
#12
Originally Posted by icewake
I would suggest calling Dave Burnette becuase he can get you a decent discount on new MAF's. I do not remember the exact price but I am sure someone will chime in.
#13
Originally Posted by mcfalcons15
What about for an 02 Max. Theres no tranny slip TSB, but I think that is the problem. Could be the MAF, but not sure. Should I just chang out MAF and see what happens? Then if nothing, get tranny fixed?
T
#14
Originally Posted by mcfalcons15
What about for an 02 Max. Theres no tranny slip TSB, but I think that is the problem. Could be the MAF, but not sure. Should I just chang out MAF and see what happens? Then if nothing, get tranny fixed?
Well you could do that, but you have a VQ35 and the MAF is 400.00+. Go to the stealer and get it diagnosed. Then go from there.
#15
Originally Posted by alpinestars
Well you could do that, but you have a VQ35 and the MAF is 400.00+. Go to the stealer and get it diagnosed. Then go from there.
#16
Originally Posted by Cdoc
My Maxima loses power somwhere around 4,000 RPMs. I notice the car is acelerating then it hits a certain point and nothing. I actually have to let off the accelerator sometimes just to get it to change gears.
It has 89,000 miles on it and I just changed the plugs a few weeks ago (hoping that would fix the problem).
I was thinking it might be the MAF but most people who replaced the MAF also had stalling problems and I don't have that.
Anyone have any ideas what this could be?
It has 89,000 miles on it and I just changed the plugs a few weeks ago (hoping that would fix the problem).
I was thinking it might be the MAF but most people who replaced the MAF also had stalling problems and I don't have that.
Anyone have any ideas what this could be?
If so, my money is on the VIAS being broken.
#17
Originally Posted by Puppetmaster
Does it top out in every gear at 4-5000 rpms?
If so, my money is on the VIAS being broken.
If so, my money is on the VIAS being broken.
#20
Originally Posted by Cdoc
I'm not sure what you mean by "top out". But everything I've read on the VIAS makes it seem like a broken VIAS causes a subtle loss of power. What I experience is a dramatic loss of power. The car goes from accelerating to just maintaining speed in an instant. It is so pronounced that the passenger can actually notice the power drop off. To them it appears as though I took my foot off the accelerator.
#21
Originally Posted by Cdoc
I'm not sure what you mean by "top out". But everything I've read on the VIAS makes it seem like a broken VIAS causes a subtle loss of power. What I experience is a dramatic loss of power. The car goes from accelerating to just maintaining speed in an instant. It is so pronounced that the passenger can actually notice the power drop off. To them it appears as though I took my foot off the accelerator.
http://forums.maxima.org/showthread.php?t=466415
Not sure if that's as extreme as your describing though.
#22
Originally Posted by mcfalcons15
I have the same slipping tranny problem. Whats the best fix, and where is the best place to get it done? Don't wanna get raped at the stealership.
simple I had the same problem,.... I just changed the tranny fluid, and it worked great for my car. I also changed the tranny filter too. it is a DIY thing.
#23
I have only heard of the stalling problem in manuals cause we dont get the clutch in till after idle. i would look at MAF, if the CEL goes on maybe look at a "random" misfire. i know it sounds strange but ive seen it happen.
P.S. MAFs arent always coupled with stalling, even on manuals
P.S. MAFs arent always coupled with stalling, even on manuals
#24
i have the same exact problem....I didnt have it when i was on an ebay cai...but after i went to GAB with K&N air filter, it started doing the same thing to my car. I dont think that GAB is the reason for it....
But when i floor my car, and once i hit 3.5k RPM my car will not pull at all, it'll keep the same speed, it'll hardly speed up. But once it passes 4k rpm, it gets the power back, and it pulls like crazy. I usually let go off of the gas padel once i hit 3.5k rpm, and than hit it again, that way it shifts, and it'll get the power back.....
I did talke to the technician today, while he was adv. my timing, and asked him what could be the problem.....and he said that MAF could be the problem, not 100% sure tho.....and i asked him if the VIAS could be the problem also, and he said, no, cause' it opens at like 5k rpm....
so idk if its the maf or not...if anyone finds any more info on this i would love to fix it....It feels so weird, when it looses power
thanks guys
huso btw: i have a 00 maxima, 80k miles, its an automatic
But when i floor my car, and once i hit 3.5k RPM my car will not pull at all, it'll keep the same speed, it'll hardly speed up. But once it passes 4k rpm, it gets the power back, and it pulls like crazy. I usually let go off of the gas padel once i hit 3.5k rpm, and than hit it again, that way it shifts, and it'll get the power back.....
I did talke to the technician today, while he was adv. my timing, and asked him what could be the problem.....and he said that MAF could be the problem, not 100% sure tho.....and i asked him if the VIAS could be the problem also, and he said, no, cause' it opens at like 5k rpm....
so idk if its the maf or not...if anyone finds any more info on this i would love to fix it....It feels so weird, when it looses power
thanks guys
huso btw: i have a 00 maxima, 80k miles, its an automatic
#25
Same problem
I had the same problem on my car last winter. Sounds like you described what was happening with mine exactly. I bought a new MAF and put it in myself and it totally cured all high rpm power loss. I had to let up on the gas to get my car to upshift just so I could continue to accelerate. Once I put the new one in, there was no hesitation, no power loss, it just pulled all the way up, no complaints.
#26
I can't equate the loss of power to whp so I can't say if it is similar to losing 30 whp, but it is dramatic.
I don't know if I have the problem if the car is not wot. Can you hit 4 or 5K w/o wot? Hopefully I'll remember to check that on my way to work tomorrow.
On my way home from work tonight it actually pulled all the way to the redline. That is not the typical case but occasionally it will work. I tend to attribute on/off behavior as an electronic problem (MAF) more than a mechanical problem (VIAS). Mechanical problems have a tendency to "stay broken".
I'm just hoping I can get a chance to replace the MAF tomorrow.
I don't know if I have the problem if the car is not wot. Can you hit 4 or 5K w/o wot? Hopefully I'll remember to check that on my way to work tomorrow.
On my way home from work tonight it actually pulled all the way to the redline. That is not the typical case but occasionally it will work. I tend to attribute on/off behavior as an electronic problem (MAF) more than a mechanical problem (VIAS). Mechanical problems have a tendency to "stay broken".
I'm just hoping I can get a chance to replace the MAF tomorrow.
#28
vais- variable air induction system
vias- variable induction air control system both are referring to the same thing though i believe nissan used the later in the literature such as in the fsm/esm.
vias- variable induction air control system both are referring to the same thing though i believe nissan used the later in the literature such as in the fsm/esm.
#29
i have the same exact problem....I didnt have it when i was on an ebay cai...but after i went to GAB with K&N air filter, it started doing the same thing to my car. I dont think that GAB is the reason for it....
But when i floor my car, and once i hit 3.5k RPM my car will not pull at all, it'll keep the same speed, it'll hardly speed up. But once it passes 4k rpm, it gets the power back, and it pulls like crazy. I usually let go off of the gas padel once i hit 3.5k rpm, and than hit it again, that way it shifts, and it'll get the power back.....
I did talke to the technician today, while he was adv. my timing, and asked him what could be the problem.....and he said that MAF could be the problem, not 100% sure tho.....and i asked him if the VIAS could be the problem also, and he said, no, cause' it opens at like 5k rpm....
so idk if its the maf or not...if anyone finds any more info on this i would love to fix it....It feels so weird, when it looses power
thanks guys
huso btw: i have a 00 maxima, 80k miles, its an automatic
But when i floor my car, and once i hit 3.5k RPM my car will not pull at all, it'll keep the same speed, it'll hardly speed up. But once it passes 4k rpm, it gets the power back, and it pulls like crazy. I usually let go off of the gas padel once i hit 3.5k rpm, and than hit it again, that way it shifts, and it'll get the power back.....
I did talke to the technician today, while he was adv. my timing, and asked him what could be the problem.....and he said that MAF could be the problem, not 100% sure tho.....and i asked him if the VIAS could be the problem also, and he said, no, cause' it opens at like 5k rpm....
so idk if its the maf or not...if anyone finds any more info on this i would love to fix it....It feels so weird, when it looses power
thanks guys
huso btw: i have a 00 maxima, 80k miles, its an automatic
#30
My car does the exact same thing. I accle all the way it revs and starts going then it just sounds crazy and goes up to high RPMs and just makes a noise and takes forever to shift... I sometimes also have to de accel to shift... Its a embarrassing amoun tof power gone I find myself acceling as hard as I can and then realizing all the other cars around me are going just as fast... I didnt realize how weak my car was until I drove our lexus. This makes me very mad and I thin it is probably the MAF and I will save up some money and tell you what happens lol
#31
anyone tested their knock sensor to see if that is bad and pulling timing? i had the same exact problem in my 240sx, i started testing sensors and found my knock sensor and o2 bad, so i replaced both, all problems are gone now. get a multi meter and a FSM and check voltage and resistance on your sensors, before you start buying and swapping parts.
#33
About 500 miles after I replaced the MAF the SES light came on w/ a P0430 code. I cleared the code and a couple days later the light came back on (I haven't checked it but I'm assuming it is the same code). Has anyone else had this problem after replacing their MAF?
#34
Originally Posted by HerBlue2kSE
Guys.. note the year of the car: 2K
I could baby it up to 5000 RPMS but it felt like someone tied something heavy to the back. Let off the gas and it would shift only to do the same thing again. Kept the Revs below 3500 and is was drivable.
I could baby it up to 5000 RPMS but it felt like someone tied something heavy to the back. Let off the gas and it would shift only to do the same thing again. Kept the Revs below 3500 and is was drivable.
MAF sensor bad?
6/06/06
Yes it was bad. Just got done installing a new MAF sensor (AllEurasianAutoparts.com, $105). Wow, what a difference. I CAN give you full power captain! Thanks for the help folks.
P.S. Only 67K miles, I'm not too happy with Nissan right now. I know, I know, its a 2000 model...
#36
My girlfriends I30 has the same problem, loss of power at 3800 or so RPM. I guess I will try the MAF and hope it cures it.
I can't start my own thread yet, so I hope I can tag this onto the end of this one-
While looking under the hood to other possible issues I noticed two wires that look like the insulation had melted off. These wires are on the F43/F191 Engine Conrol Connector. The two wires are the Red/Black on pin 6 (Injector No1) and the other is the wire on pin 8 which is Pink/Blue or Light Blue.
I have the service manual but can't locate wire 8. Anyone have a wiring diagram? Or is it online in PDF?
I can't start my own thread yet, so I hope I can tag this onto the end of this one-
While looking under the hood to other possible issues I noticed two wires that look like the insulation had melted off. These wires are on the F43/F191 Engine Conrol Connector. The two wires are the Red/Black on pin 6 (Injector No1) and the other is the wire on pin 8 which is Pink/Blue or Light Blue.
I have the service manual but can't locate wire 8. Anyone have a wiring diagram? Or is it online in PDF?
#38
what is VAIS
I recently went cold air intake , had same problem, car just lost all power after about 3-4k rpm. had to clean all piping , MAF and air temp sensor (only cleaned piping after having to clean both sensors 3 times running car after each clean) I cleaned everything with MAF sensor cleaner and insulated whole piping setup;particuarly, because my placement of air temp sensor was way to close to radiator hose, so had to insulate that,and decided to insulate whole system. now car pulls mint as and runs cooler, but is slightly lacking in power after 4500-5k rpms this was a problem before CAI install but is slightly worse now. PLEASE ,, what is a/the VAIS??
#39
sorry VAIS was explained already
, any one replacing MAF sensor needs to go genuine nissan , I got quote in NZ dollars for genuine nissan MAF (which only comes with housing, not separate) and it was $1170 NZD , now this is why one should go genuine nissan for MAF ,as why do you think a stupid peice of plastic housing would cost $1170? because it does not, the price is for the genuine MAF .
Thread
Thread Starter
Forum
Replies
Last Post
lowpost99
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
7
05-16-2021 11:18 AM
sdotcarter
6th Generation Maxima (2004-2008)
2
09-02-2015 09:53 PM