1/4 and 1/8 Mile Racing Talk about track times, launch techniques, strategies, etc. Check out the "Timeslips" subforum for posted times.No discussion of street racing will be tolerated.

pretty dissapointed

Thread Tools
 
Search this Thread
 
Old 06-17-2006, 02:26 PM
  #1  
Senior Member
Thread Starter
iTrader: (7)
 
merovi's Avatar
 
Join Date: Oct 2004
Location: Rochester NY
Posts: 0
pretty dissapointed

So I went to the track for me second time last night. My first time at the track, the best I could do was a 15.248 at 91.69 with a 2.498 60', with only a GAB. Now, over a month later, I have a warpspeed Y-pipe and frankencar intake. My first run was a 14.998 at 93.53 with a 2.244 60'. Following my first run I ran a mix of 15.4 a few times, 15.3 a few times, 15.2 once, 15.1 a few times and a 15.0 twice all at 93, except one of the 15.4 at 92. All of my 15.4 and 15.3's were with 2.4 60' and all my 15.2 was with 2.3, and ever my 15.1's were with a 2.4 60'. I never managed to get back into the 14's. I assumed that I would atleast be able to run a 14.8 a few times. I had my tire pressure to 25 psi, and took everything out of my trunk, including my spare. My first time at the track was fully loaded with even my system. anyone have some input, or is this normal and I just had high expectation? I'm a 2k 5spd, with 15" steelies.
merovi is offline  
Old 06-17-2006, 03:21 PM
  #2  
SLOW
iTrader: (23)
 
Nealoc187's Avatar
 
Join Date: Mar 2001
Location: West burbs, Chicago
Posts: 14,631
Well it wasn't the car keeping out out of the 14.8s, it was how well you are launching it. 93mph traps you could see 14.6s possibly, 14.8s shouldn't be a problem for you with more practice.
Nealoc187 is offline  
Old 06-17-2006, 03:49 PM
  #3  
Senior Member
Thread Starter
iTrader: (7)
 
merovi's Avatar
 
Join Date: Oct 2004
Location: Rochester NY
Posts: 0
thanks, I was really struggling with the launches. Everytime I was at or around 3k, it was spin really bad. When I was at 2.6 ish, it would spin a little. The first run, when I did the only 2.2, there was practically no spinning, I didn't even chirp 2nd, but I really wasn't paying attention to what I was launching at, I was distracted by the other driver who didn't know how to light up his side of the tree.
merovi is offline  
Old 06-19-2006, 06:08 AM
  #4  
Senior Member
iTrader: (10)
 
BigLou93SE's Avatar
 
Join Date: Jun 2004
Location: Danbury, CT \ Rochester, NY
Posts: 2,598
Oh I miss NYIRP...haven't been to another track yet...

Anyways, just take what Neal said and keep practicing. Also, make sure you're not heatsoaking...I know how easy it is to run back to back at that track. Just get off your run, and pop your hood for a few, and relax for a while before you run again.
BigLou93SE is offline  
Old 06-19-2006, 07:13 AM
  #5  
Senior Member
iTrader: (8)
 
streetzlegend's Avatar
 
Join Date: Dec 2003
Posts: 4,097
also check your vias n see if its not a little loose.
streetzlegend is offline  
Old 06-20-2006, 04:26 PM
  #6  
Senior Member
Thread Starter
iTrader: (7)
 
merovi's Avatar
 
Join Date: Oct 2004
Location: Rochester NY
Posts: 0
Originally Posted by streetzlegend
also check your vias n see if its not a little loose.
how do I check that? I'm pretty sure I dont have a vias problem because she still pulls hard after 5k rpms.
merovi is offline  
Old 06-29-2006, 11:34 AM
  #7  
Donating Maxima.org Member
 
O_Rly's Avatar
 
Join Date: Jun 2006
Posts: 17
Just keep working on the launch. That is where your problem is. Try to get down to a 2.1 60' consistently. With those traps you could hit 14.7 I'd think.
O_Rly is offline  
Old 07-01-2006, 11:35 PM
  #8  
drag racing is for wussies
iTrader: (15)
 
BlackBIRDVQ's Avatar
 
Join Date: Nov 2002
Posts: 6,023
I think your VIAS is bad... my car with full trunk of junk, 100F track temps, 2.4 60' (I don't drag race) Ypipe, custom exhaust, Fidanza flywheel, UDP and PR CAI netted me 15.1@94MPH. Car felt fine, but *I* adjusted myself to the lack of top end and didn't notice it till I pulled the power rod out of the VIAS and it felt like VTEC or something kickin over at 5000RPM. I have zero doubt in my mind the car is capable of 13s (in its current state), but I am not going to try it.
BlackBIRDVQ is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
mclasser
5th Generation Maxima (2000-2003)
22
11-12-2020 01:58 PM
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
D Mason
8th Generation Maxima (2016-)
1
06-21-2016 04:43 AM
hez8813
5th Generation Maxima (2000-2003)
0
09-27-2015 08:37 AM



Quick Reply: pretty dissapointed



All times are GMT -7. The time now is 01:05 AM.