Throttle Body?
09-08-2004, 11:41 AM
#1
Throttle Body?
What yeah stanza or 240 TB can I use as a direct replacement on my 87? I am curious because I just got a Pathfinder TB for my 4th gen and if it gives significant gains I am thinking about doing this mod to my second gen. Thanks.
-Carson
-Carson
09-09-2004, 05:57 AM
#7
70mm is what the fourth gen is boared out to
--and if someone else is ready to buy this right now from ^^ then by all means go ahead...this is just a thing I was thinking about in the next few months...I still need to get it hooked up on my fourth gen and go to the dyno to see if its a worthy mod.
-sarin, I really dont know what you are saying above. It sounds like you want to bore out your TB. Are you saying you need to bore out your IM for the stanza TB?
--and if someone else is ready to buy this right now from ^^ then by all means go ahead...this is just a thing I was thinking about in the next few months...I still need to get it hooked up on my fourth gen and go to the dyno to see if its a worthy mod.
-sarin, I really dont know what you are saying above. It sounds like you want to bore out your TB. Are you saying you need to bore out your IM for the stanza TB?
Originally Posted by maximase86
What did you use to bore out your IM on the 4th gen? I have a 60mm tb, but I need to bore it out.
S
S
09-09-2004, 06:37 AM
#8
Senior Member
Join Date: Nov 2003
Posts: 398
Funny thing, when I went to port my intake for the 240 TB, I found that mine was already very close. I barely had to touch it to open it up to 60. For all intents and purposes I could have just left it like that. But anyways what I used was a clean rag stuffed tightly into the intake and an air die grinder with a medium grit stone. Pulling the rag out took all the debris with it, and I used a shop vac just to make sure there were no stray metal particles.
09-09-2004, 07:07 AM
#9
Originally Posted by wylie-c
Funny thing, when I went to port my intake for the 240 TB, I found that mine was already very close. I barely had to touch it to open it up to 60. For all intents and purposes I could have just left it like that. But anyways what I used was a clean rag stuffed tightly into the intake and an air die grinder with a medium grit stone. Pulling the rag out took all the debris with it, and I used a shop vac just to make sure there were no stray metal particles.
09-09-2004, 07:56 AM
#11
Originally Posted by wylie-c
I did the TB, air filter, and exhaust all at the same time. But I did take it for a spin with just the throttle body and it did improve throttle resonse, but you really have to do all three to see any real gains.
09-09-2004, 11:24 AM
#12
Senior Member
Join Date: Apr 2003
Posts: 377
An engine is basically a big air pump...
If you take more air in than you can get out, you won't
see much performance gains...
Same goes for the exhaust side... if you let more air out
than you take in, again you won't see much performance
gains...
When mods are done at both ends to get more air through
the engine... then the fun begins!
Scott
If you take more air in than you can get out, you won't
see much performance gains...
Same goes for the exhaust side... if you let more air out
than you take in, again you won't see much performance
gains...
When mods are done at both ends to get more air through
the engine... then the fun begins!
Scott
09-09-2004, 11:34 PM
#15
Member
Join Date: Nov 2002
Posts: 86
Originally Posted by 86Wagon
Still want to sell the TB?
Scott
Scott
of course I want to sell it, I need to empty the shelve for some other stuff. picture(s)? I'll post them tomorrow, got to charge the camera battery for now..
09-10-2004, 07:26 PM
#16
Originally Posted by ASHURA
240sx: 89-90
stanza: 90-92 (i got 1 if u want.. got the cruise control cam as well)
stanza: 90-92 (i got 1 if u want.. got the cruise control cam as well)
you were the one that had the cam'ed one, i couldnt find my old post i want the stanza one but as of the moment i cant afford it
09-10-2004, 09:37 PM
#22
Senior Member
Join Date: Apr 2003
Posts: 377
Originally Posted by maximase86
hehehe, your gonna have a mean wagon after your done! Now you gotta do the 5-speed conversion....that would be totally unexpected! 
Maybe I'll wait till the auto tranny goes belly up!
I still have a nice brand new set of 17" rims waitin to
go on the car... just waiting till I can afford the tires!
Here's an Ebay link to what my car looks like... this one
is an 87, but just picture it with 86 wheels and no luggage
rack!
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Scott
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
4
10-18-2015 05:31 AM
220k+ A32
5th Generation Maxima (2000-2003)
8
09-23-2015 03:38 PM