what r VTC's? sorry, i'm an LS1 guy.
#1
what r VTC's? sorry, i'm an LS1 guy.
what r they and what happens to your motor when they go bad. any helpfull links will be greatly appreciated. I just bought this maxima about 3 days ago as a daily driver to not put miles on my other "beast"; but that doesn't mean I won't be racing this car. I just love 3rd gen. maxima's.
LS1's and VE maxima's
LS1's and VE maxima's
#2
Originally Posted by 5 ltr. beater
what r they and what happens to your motor when they go bad. any helpfull links will be greatly appreciated. I just bought this maxima about 3 days ago as a daily driver to not put miles on my other "beast"; but that doesn't mean I won't be racing this car. I just love 3rd gen. maxima's.
LS1's and VE maxima's
LS1's and VE maxima's
Here is an article Jeff92SE wrote about them: http://www.geocities.com/bracecraig/...vcs-bible.html. I got that from Craig's site, which is listed under the FAQS sticky at the top of this page.
#3
Valve Timing Control
Basically they advance the intake cams 20* for more torque. They sit on the end of the intake camshafts, where the sprockets are.
http://s92599732.onlinehome.us/images/Veapart/1.jpg
The 'top' camshaft is the exhaust, the 'bottom' is the intake (just how I have them in the box).
Basically they advance the intake cams 20* for more torque. They sit on the end of the intake camshafts, where the sprockets are.
http://s92599732.onlinehome.us/images/Veapart/1.jpg
The 'top' camshaft is the exhaust, the 'bottom' is the intake (just how I have them in the box).
#4
Originally Posted by Mizeree_X
Here is an article Jeff92SE wrote about them: http://www.geocities.com/bracecraig/...vcs-bible.html. I got that from Craig's site, which is listed under the FAQS sticky at the top of this page.
#7
Originally Posted by gowirelessnj
possible if the units have failed. i just got done replacing mine (couldnt stand the desiel sound)
#8
thats what mine did after startup they were quiet, then as the motor began warming up it clacked and clacked, then after its fully warm it stopped. i couldnt stand it anymore - never had a problem like that with my trans-am GTA (350cu) 400whp. (great car)
#9
Originally Posted by gowirelessnj
thats what mine did after startup they were quiet, then as the motor began warming up it clacked and clacked, then after its fully warm it stopped. i couldnt stand it anymore - never had a problem like that with my trans-am GTA (350cu) 400whp. (great car)
#10
Originally Posted by 5 ltr. beater
does VTC failure necessarily mean loss of HP too if any at all; besides the noise.
#11
Originally Posted by 5 ltr. beater
so r u saying that I still have time? I don't understand.
yeah you have time. go to craigs site (in the FAQs) and ground them for now if the noise is bothering you.
OR
Try a Toyota filter part number 90915-YZZA2. Some have said that this quieted their VTCs.
rebuild or get new ones later when you feel like fooling with it.
#13
Originally Posted by 5 ltr. beater
do you or anyone know where i can find the "Nissan Technical Service Bulletin" for this problem?
http://www.mattblehm.com/faq/VTC_tsb.pdf
Make sure your tell Matt93se thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Matt93SE
1st-3rd Generations Classifieds (1981-1994)
15
04-08-2018 09:23 AM
raffivegas
6th Generation Classifieds (2004-2008)
0
08-23-2015 09:54 PM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM
JonnyMax
3rd Generation Maxima (1989-1994)
4
01-25-2001 08:58 AM