Last set sold. I most likely won't be producing these unless I get some serious interest. ie... 5 or more confirmed buyers.

 

can someone hook me up with brakets and the stainless steel brake lines pleaseeee e mail me to latinomalenj2000@yahoo.com

 

i serious to get those brakets

 

IS that you George Of the Jungle?

 

Jeff, if you stop producing these, what would you think about another person possibly producing some in the future using yours as a template - Not to make money off your product, but just as a service to have them available since you may not make them anymore? Just curious.

BTW, you are still making the fronts for the Cobra 13" BBK, right? What are prices again? Thanks.

-Mark

 

I'm still making the fronts $90 shipped for the brackets/rings.

Rears. I'm not making them anymore. If someone is willing to take up the torch, I don't care.

 

And an era comes to an end..

Oh the huge manatee..

 

I'm gonna need that bracket soon too
and for the record it does clear the 92 Se wheels just fine

 

Ouch.. So we won't be able to get them anywhere else?

 

I'll do it. I have access to 3 vertical milling machines, 4 lathes, 2 fryer CNC's, a new hurco, and some other behemoth donated from Ford to the University. If you give me the CNC codes or Blueprints, I can have 16 cranked out in about half an hour.

 

I'll do it. If have access to 2 Fryer CNC's, a new Hurco, a behemoth donated by Ford, 4 vertical milling machines, 4 lathes, and a bunch of other stuff. If you gave me a CNC code or the blueprints I could have 16 cranked out in about 30 minutes.

 

Its a little late and I might've misread but so far I'm definately interested as I'll be doing a drum to disc conversion in the near future. Just to do everything easier and not have to run around. Should I get strut assemblies off 89-91 SE or 92-94 SE for my car to do the z31 conversion?

generic z31 rotors are $16 here. and for maxima they're about $37
wonder why..


btw if you're in need of brackets I can get them dirt cheap at the local JY.

 

Well either would work, as long as you know what you get. The z31 conversion needs Jeffs rear brackets for 92-94 calipers, or brackets from an 89-91, and the 92-94 caliper. Brackets are cheaper than calipers so i'd say go with 92-94 strut assemblies. Although...I'd still reccomend a rebuild kit from rock auto. Calipers from a yard are all risky business IMO. Oh, and I need the rear brackets, so PM me and I'll paypal you some cash if Jeff doesn't send me prints to make these brackets.

 

I'll see if I have the drawing. They weren't done in cad or cut on a cnc machine as far as I know.

 

Hey Traxtar, are you still willing to make these? I was looking up this old thread since I'm getting ready to do the rear disc conversion finally. I have the brackets from Jeff92SE and was wondering if I should send them to you before I install them so you can use them as templates in case someone else wants to get some made.

Jeff, did you ever find those drawings? I'm still interested in the front brackets. I'll let you know when. Thanks.

-Mark

 

I can have them made. But I need commitments from 5 guys + before I make another set.

If you want the front bbk brackets, let me know asap. I have ONE set from a big batch. Not sure when I'll be doing anther set of these either.

 

OK, I'll take 'em. I'll send $ by PayPal in a couple days after I get paid. How much are they? Thanks,

-Mark

 

I'd be in for a set of rears... How much would they be? Same price as before?

 

 

Ref: http://forums.maxima.org/4th-generat...ale-again.html

$60 shipped.

If the rear brackets are the same price, they are the same. But it's been a few years since the last batch was done.

 

Well the line forms here.

1) Pearl93VE.
2)
3)
4)
5)

 

so mark is getting those front ones then... would parts from an actual q work on a maxima knuckle? or is that still not big enough for a 13" rotor? there's a q at my junkyard that doesn't look very disassembled yet.

 

FRONT BBK. Short version. Search for the long and more complete version

Q45/J30 calipers + Q rotors + rotor shaving = fit.

Q/J/300zx 30mm calipers + no brackets + 13" Cobra rotor = no way jose

I could have more front brackets done but I'd need more interest before I get another batch done

 

soo... I have q calipers already. they will fall off the edge of stock maxima rotors won't they? i haven't test-fit anything to see what is what size. but that's what i have available right now and i'd rather have the 2piston up and running even if it's not on big rotors... and of course q rotors will need to be shaved and whatnot. dunno how much that runs.... i think mikekantor did this right? or mrkanda?

 

Considering 89-01 IIRC front brakes are the same, the bracket also applies to 4th gens right? if so do you think the 13 inch rotors would clear 2001 SE 17s?

 

With the Q or J 2 pot calipers they should.
and you had about 5 j30s in the yard the other day

 

well I had Q calipers but tossed em in on a big purchase caped made when he was here. I can def get J30 but ehh I kinda want fancier lookin calipers

I currently have ONE Z32-TT 4 piston aluminum caliper and I'm waiting to see if I can get ahold of the other side

 

Screw fancy, I want to stop fast

 

yea i think i'm putting them on my friend's 3rd gen instead of mine tho.... unless you really want em back but you can prolly get another set for for fee within a week at your job