How to replace fog-lights on '91 Maxima SE?
#4
Guest
Posts: n/a
Originally posted by block
you can see the foglight in my sig, that is from walmart
you can see the foglight in my sig, that is from walmart
stick out from under. The problem is to replace them you
almost have to dismantle the entire front fender, since the
screws for the lamp are so hard to remove otherwise.
Anyone done this on their own?
Thanks!
#6
Originally posted by mpmoturi
Thanks for that info. But, mine is an SE and the SE fogs
stick out from under. The problem is to replace them you
almost have to dismantle the entire front fender, since the
screws for the lamp are so hard to remove otherwise.
Anyone done this on their own?
Thanks!
Thanks for that info. But, mine is an SE and the SE fogs
stick out from under. The problem is to replace them you
almost have to dismantle the entire front fender, since the
screws for the lamp are so hard to remove otherwise.
Anyone done this on their own?
Thanks!
if you get under the light and look straight up, you can see a bolt holding the foglight in; it goes across (parallel to the bumper). Just remove this and the fogs will come down so then you can take off the 2 screws on the back
good luck
if you can't get it, email me and I can get you some pics
Thread
Thread Starter
Forum
Replies
Last Post
Maxilano
7th Generation Maxima (2009-2015)
1
08-31-2015 07:33 PM
YourLocalAsian
6th Generation Maxima (2004-2008)
3
08-17-2015 02:33 PM
District
5th Generation Maxima (2000-2003)
8
08-15-2015 08:23 PM