Dougn

I got one of the Flashing alarm led and ready to connect to my existing Alarm system on the 92 GXE. The diagram showns one goes to 12v+ contant or battery +. I found this ok. The second wire should goes to 'The alarm system's accessory output'. Any one knows what wire (color) is this on the harness to the alarm unit located the left of the steering column. Optionaly where else can I connect the second wire from the led light to?

Dougn

Ok. I know how to ask the question now. Any one got a '91 Vehicle Wiring Information? Also is there an alternative for the 12V+ contant and 'alarm system's accessory output' that I can use to hook the led wires up.
Thanks.

Dougn

I finally got hold of the Alarm wiring diagram and figured it out. The stock alarm in my max does not have 'alarm system's accessory output'. At least I could not find it in the schematic. So I hooked it up this way:
1) Pos. wire from the led light goes to slot 1 of the Alarm control system's harness (12 V+ constand).
2) Neg. wire from the led light goes to slot 16 of the Alarm control system's harness (ground)
3) The third wire (yellow) from the led light goes to slot 3 of the Alarm control system's harness (Ingition)

The led is blinking now. Notice that this set up works without alarm system.