3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

VE power planning?

Thread Tools
 
Search this Thread
 
Old 08-18-2006 | 01:18 AM
  #1  
Wolf-Strong's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2005
Posts: 375
VE power planning?

Well by the end of the year I plan to get a 92-94SE 5sp for some more fun over my 90SE auto.

Now I am not making any commitments right now, however I thought I might as well make a thread that other people can get some info on the general subject...a mastermind of such.

First off, what kind of power can the VE handle on stock internals? Weakpoints? Or to make it easier, how much would it cost to get a VE to 300-350HP N/A? Turbo/SC? Would I be better off with the VG engine (since it might have more aftermarket available...again not sure I am just starting to research this)?

It is between the 92-94 Maxima with a lot of mods done to it or a stock BMW e49.

Again, I am just doing some planning for the next few months. Any thoughts or ideas are more then welcome!
Old 08-18-2006 | 05:07 AM
  #2  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
eh, I'd probably run the E49 IF i KNEW WHICH MODEL IT WAS
Old 08-18-2006 | 11:42 AM
  #3  
Wolf-Strong's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2005
Posts: 375
Originally Posted by internetautomar
eh, I'd probably run the E49 IF i KNEW WHICH MODEL IT WAS
Well I'm still trying to decide on that myself =P Right now I am trying to concentrate on the Maxima idea first, then weigh the pros and cons of that with the pros and cons on both the i6 and v8 of the e49. Sorry if that confused everyone, I just meant to concentrate on the Maxima here.
Old 08-18-2006 | 12:32 PM
  #4  
Cliff Clavin's Avatar
Way out West
iTrader: (11)
 
Joined: May 2003
Posts: 6,565
From: Oregon
All of my comments are for the VE -- not VG.

You are probably not going to be able to get up to 300 hp NA. I think even with NA 300zx pistons, you won't get there. I think with just about every bolt in in existence you would only get a little over 200 hp at the wheels.

Turbo applications have to be totally fabricated. There are a couple of brave souls that have pulled it off. It seems like a lot of work and you need some skills. I would think it is an easier route to do this on a VG, but Brad92SE or MaxTuned can probably argue against it. hehe

I don't think anyone has supercharged a 3rd gen that I can recall.

Probably the biggest weak point is going to be the transmission. It seems like a lot of people that have modded VEs eat up input shaft bearings.
Old 08-18-2006 | 12:41 PM
  #5  
Jeff92se's Avatar
I'm needing a caw
iTrader: (82)
 
Joined: Aug 2000
Posts: 34,146
Someone say turbo?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aw11power
Supercharged/Turbocharged
161
10-10-2021 04:57 AM
gigabyte
8th Generation Maxima (2016-)
8
01-06-2017 06:05 PM
maxinout93
5th Generation Maxima (2000-2003)
14
10-31-2015 02:04 AM
leatherneck
4th Generation Maxima (1995-1999)
1
09-30-2015 09:16 PM



Quick Reply: VE power planning?



All times are GMT -7. The time now is 11:37 PM.