AKAICEBERG

Hello, I dunno what it is but lately all I read is y/i/ADVANCED TIMING. I know that advancing the timing will give the vg a little extra power, but all this talk makes me think I'm missing out on something big!! I'm gonna be advancing my timing soon, so I will find out what all the rave is about soon enough.


Will timing advance be faster than a stock vg with the same modds?? Where did you notice the most gains from the advance?? What is the highest advance can I go(18-20)??

Thanks a lot,
Kevin

ghostmax

iTrader: (4)

Well it's gonna be my next mod since I want to save my money. From what I've been reading it mostly adds low-end. People set it around 20 degrees. You should probably use a timing light just to be sure although I think some have just moved it w/o one. Here's a link:

http://members.csinet.net/tisch/maxima/

SkyMax

When you advance your timing make sure you are using gas thats 89 octane or better. I suggest you use 92 octane or better but other people use 89 octane and say they have no problems.

NZ Max

wish I could advance my timing

mykizism

does advanceing the timing on the car really help that much?

any top end gains? or just mainly low end?

mykizism

im not sure if i advanced or retarted my timing

because one day i took my distributor cap off.. to clean everything and make sure everything is running ok.. i put it back on straight, but im not sure if that didnt anything to the timing..

SkyMax

Just get a timing gun and check it. There are some places that have rentals or you could even ask to borrow one for a few minutes.

mykizism

ok thx do u know what the stock timing is?

SkyMax

Stock timing should be @ 15 degrees.

mykizism

thanks a bunch

appreciate the help

flyry110

i advanced mine in my ve to 18-19 degrees. i wanted to be sure i didn't go too far because then the computer takes over and retards it for me anyway, yeah, i run 94 when it's advanced. i knocked it back when gas prices went up, but now i can advance it again, even though VE's are supposed to run premium anyway. hehehe oops. anyway, i notice better throttle response and the engine seems much peppier. i was pleased, but it was a bizach being able to see the timing marks on the harmonic balancer.

AKAICEBERG

I have spoken to Nismo8780 about advancing the timing, and he broke it down for me baby style. The is one things I just can get though. Where exactly are the timing marks. I know there on the timing cover, but I looked and didn't find them. Maybe they are covered with crude.
Oh and from what I understand I have to turn the distributor when the car is on, but won't that shock me??? I guess if I use a towel to turn it that I won't get shocked.

Thanks,
Kevin

Matt93SE

iTrader: (44)

the timing marks are on the crank pulley itself... there's a notch on the timing cover that you line up to the crank pulley notches when setting your timing.. each notch on the pulley is (I THINK!) 5 degrees. so "stock" timing should be the 4th notch (0,5,10,15) .. move your timing up one notch, by turning the distributor clockwise (looking from the top of the engine)
As long as your hands are dry, you shouldn't have any problems with getting zapped. Try not to grab the spark plug wires or ends.. grab the flat parts of the distributor where there aren't any wires. it won't physically hurt ya anyway, just don't hold onto it forever if you do get shocked.

SEguy182

theres a confidence booster...if it hurts let go

mykizism

matt i dont get it.. how are you suppost to see the timing marks when they are on the crank pully. because from up top.. trying to view down its almost impossible to see the (or even point) the timing gun at the crank pully.. i just installed a new udp so the crank pully timing marks are marked in white (thank god) but yah how am i suppost to know what the timing is ?? i never used a timing gun so i have no clue what questions to ask.. but im gonna buy a timing gun in the next day or so and play with it..

lp

iTrader: (1)

Buy the equipment, hook it up and the first time you point the gun down at the pulley you'll understand. The timing markers will show themselves in plain view.

VG adjustment is a 60 sec (minor) mod guys, don't expect the world from it.

flyry110

not on my VE i had to fenangle that thing down in there before i could see the marks. and even then it was jumpin all over, i had to get it to stock timing before i advanced it. i had it way advanced and the computer was compensating.

Luan

Can anybody tell me the accuracy when installing the timing belt !
Is it possible if there is just a.. little off..?
My case, the car run just fine..(I think the timing is ?? OK ??..not sure.),
but it is not the same as before, there is huummm when it starts changing to the next gear (A/T transmission).
All these things just happen after the water pump and the timing belt changed.

Thank you.

nardo'89SE

can someone post there dyno'ed gains from adv. timing, not the butt dyno the real deal

mykizism

hahahahhahaha yah i bought my self a timing gun today.. yah its VeRY in plain view.. omg its soo cool looking ^__^