Master Cylinder or brake booster failure??
#1
Master Cylinder or brake booster failure??
I thought I solved my brake troubles after replacing my leaking rear caliper, but I was wrong! Now Fluid seems to be leaking from my master cylinder, and down onto the brake booster thingy. I still have brakes, but I just noticed that when Im at a stop with my foot on the brakes, they seem to give out a little bit, like the car wants to inch forward, so I have to press down a little more on the brake pedal. Anyone ever experience this, Ive never diagnosed a master cylinder problem or brake booster problem before, nor have I ever replaced either.
#3
#4
meh, it's pretty straight forward....get yourself a flare nut wrench for the brake lines..As regular wrenches tend to round off the soft nut heads on the brake lines...
![](http://www.neon-john.net/EV/Photos/Tubing_nut_wrench.jpg)
And yes, you will need to bench bleed your new m/s, along with all your points at the wheels too...
![](http://www.neon-john.net/EV/Photos/Tubing_nut_wrench.jpg)
And yes, you will need to bench bleed your new m/s, along with all your points at the wheels too...
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM