exhaust / muffler
#41
yeah i'll try to get a better vid with straight acceleration tomorrow night, no stop n go traffic
the seats were a good accomplishment, first to make a harness bar fit
i get bruised about my mods at work, but thats what you get when you work at a garage with 3 old people
the seats were a good accomplishment, first to make a harness bar fit
i get bruised about my mods at work, but thats what you get when you work at a garage with 3 old people
![Laugh out loud](https://maxima.org/forums/images/smilies/lol.gif)
Last edited by chrome91; 05-19-2011 at 08:45 PM.
#42
Sounds like a motorboat! If it sounds like that inside I can only imagine outside. Try some other combinations but I would say cat and resonator. I have a full WSP 2.5 and finished it with just a turbo dual tip muff and I think it sounds fine...not too loud and not too wimpy.
#43
i took off the catalytic converter and put on a straight pipe and a can muffler months ago done. its too loud with out the silencer and it sounds corny with the silencer on. ![Mad](https://maxima.org/forums/images/smilies/mad.gif)
should i get a new a muffler or should the one i have sound good if i put a catalytic converter on?
what kind of muffler do you guys have with or with out a catalytic converter and how does it sound (include videos if you have any)
![Mad](https://maxima.org/forums/images/smilies/mad.gif)
should i get a new a muffler or should the one i have sound good if i put a catalytic converter on?
what kind of muffler do you guys have with or with out a catalytic converter and how does it sound (include videos if you have any)
I can get a video up for you in a couple of days.
#44
The inlet on the 14862 is 2.25 while the pipe is 2.5, isnt it all suppose to be 2.5?
Put on another resonator, it will quiet down the exhaust quite a bit. On my max, I got another resonator put on a couple days ago. It toned down the exhaust a few decimals and the drone was a lot quieter. The setup I have is a WSP y-pipe, catalytic converter, custom 2.5" piping catback, 2 resonator (one unknown brand and a Magnaflow) and a Magnaflow muffler #14862.
I can get a video up for you in a couple of days.
I can get a video up for you in a couple of days.
#45
Here's a link: http://thmotorsports.com/vibrant/vib.../i-163669.aspx
#47
Most of the universal Magnaflow muffler only came in a 2.25" inlet. The muffler shop just made a small section in the rear from 2.5" to 2.25" for the muffler. I was thinking of switching it out to a Vibrant street power muffler #1032 which has a 2.5" inlet.
Here's a link: http://thmotorsports.com/vibrant/vib.../i-163669.aspx
Here's a link: http://thmotorsports.com/vibrant/vib.../i-163669.aspx
#48
Put on another resonator, it will quiet down the exhaust quite a bit. On my max, I got another resonator put on a couple days ago. It toned down the exhaust a few decimals and the drone was a lot quieter. The setup I have is a WSP y-pipe, catalytic converter, custom 2.5" piping catback, 2 resonator (one unknown brand and a Magnaflow) and a Magnaflow muffler #14862.
I can get a video up for you in a couple of days.
I can get a video up for you in a couple of days.
#49
Sounds like a motorboat! If it sounds like that inside I can only imagine outside. Try some other combinations but I would say cat and resonator. I have a full WSP 2.5 and finished it with just a turbo dual tip muff and I think it sounds fine...not too loud and not too wimpy.
and i do have a OBX resonator, just no cat converter and theres no way im puting it back on
#53
#54
Watch for all the chicks that are gonna be pregnant from unprotected sex tonight......there should be a **** load of kids born in Feb 2012.......
Last edited by CMax03; 05-20-2011 at 07:13 PM.
#55
#56
I used to live up in Tacoma WA and went to a couple of the NW maxima's guys weird bunch half drive like demons and other half like little old people trying to not break laws. Not very much spirited drivers. by any chance chunky you know of a emerald green ve with gold rims up there? doubtful but thought i would ask.
#57
I used to live up in Tacoma WA and went to a couple of the NW maxima's guys weird bunch half drive like demons and other half like little old people trying to not break laws. Not very much spirited drivers. by any chance chunky you know of a emerald green ve with gold rims up there? doubtful but thought i would ask.
Pic
http://www.flickr.com/photos/pdemarnephoto/4694095631/
#58
do you know who he sold it too because that guy almost ran my friend tyson off the road on I-5 while in his White maxima VE-5. Then my friend when he had my maxima while i was away on a trip beat that green maxima by 4 to 5 car lengths. which i was trying to be the one to beat that maxima but didnt get that luck. That owner either A doesnt know how to drive that maxima or B its just not as fast and well tuned as mine compared to his.
#59
do you know who he sold it too because that guy almost ran my friend tyson off the road on I-5 while in his White maxima VE-5. Then my friend when he had my maxima while i was away on a trip beat that green maxima by 4 to 5 car lengths. which i was trying to be the one to beat that maxima but didnt get that luck. That owner either A doesnt know how to drive that maxima or B its just not as fast and well tuned as mine compared to his.
#60
#61
need some help guys..i just got a called from a local shop that is saying i'm missing a 6" pipe from catalytic convertor.
I got the mandrel bent system from the mentioned post above, resonator, warpspeed y pipe, and hi flow cat. What is this local guy talking about? I'm going at 12pm to get my car..he said he could only installed the warpsee because i'm missing the 6"'
Did anyone ran into any problems like this?
I got the mandrel bent system from the mentioned post above, resonator, warpspeed y pipe, and hi flow cat. What is this local guy talking about? I'm going at 12pm to get my car..he said he could only installed the warpsee because i'm missing the 6"'
Did anyone ran into any problems like this?
#62
#63
Here is a video of my car before I changed the muffler. I used to have a universal DTM style muffler. 2.5" exhaust custom built/bent at a local muffler shop. Stock cat, stock Y pipe.
http://www.youtube.com/watch?v=Uk5VQqo5gAw
Here is the video before I got my vi working again. Massive tips on that muffler. Had to put a quieter one on. Kept getting pulled over and was starting to lose my hearing.
http://www.youtube.com/watch?v=Hf0UE...eature=related
Another
http://www.youtube.com/watch?v=Rhxju...eature=related
http://www.youtube.com/watch?v=Uk5VQqo5gAw
Here is the video before I got my vi working again. Massive tips on that muffler. Had to put a quieter one on. Kept getting pulled over and was starting to lose my hearing.
http://www.youtube.com/watch?v=Hf0UE...eature=related
Another
http://www.youtube.com/watch?v=Rhxju...eature=related
Last edited by doubleclutch92; 06-17-2011 at 08:39 AM.
#67
Sorry, tried to do the [ youtube ] [ /youtube ] bit. Seems to never work. lol, without the spaces of course. Corrected and used [ url ] [ /url ]
Btw, crappy cell vids.
Btw, crappy cell vids.
Last edited by doubleclutch92; 06-17-2011 at 09:43 AM.
#71
Sorry for my lateness
Interior
(Window Closed)
http://www.youtube.com/watch?v=K7TIBjb8-S0
(Window Open)
http://www.youtube.com/watch?v=Gf_SUhZsdCA
My Setup
Warpspeed Y pipe
2.5 " mandrel bent pipe
Magnaflow Resonator : 10426
Magnaflow Cat : 94106
Magnaflow Muffler : 14862
Its a bit loud..actually a lot loud, i see other cars with hugh 'turbo' exhaust, like 6" hole and doesnt sound as loud as mine..which only has like a 3" twin tip. So far 3 people asked me when i'm going to get that broken muffler fixed..i had to explain its not..![Frown](https://maxima.org/forums/images/smilies/frown.gif)
As soon as i get my tranny problem fixed i'm going to get a G35 muffler and boot the magnaflow
Sorry for the unedited video.
Interior
(Window Closed)
http://www.youtube.com/watch?v=K7TIBjb8-S0
(Window Open)
http://www.youtube.com/watch?v=Gf_SUhZsdCA
My Setup
Warpspeed Y pipe
2.5 " mandrel bent pipe
Magnaflow Resonator : 10426
Magnaflow Cat : 94106
Magnaflow Muffler : 14862
Its a bit loud..actually a lot loud, i see other cars with hugh 'turbo' exhaust, like 6" hole and doesnt sound as loud as mine..which only has like a 3" twin tip. So far 3 people asked me when i'm going to get that broken muffler fixed..i had to explain its not..
![Frown](https://maxima.org/forums/images/smilies/frown.gif)
As soon as i get my tranny problem fixed i'm going to get a G35 muffler and boot the magnaflow
Sorry for the unedited video.
#72
Sorry for my lateness
Interior
(Window Closed)
http://www.youtube.com/watch?v=K7TIBjb8-S0
(Window Open)
http://www.youtube.com/watch?v=Gf_SUhZsdCA
My Setup
Warpspeed Y pipe
2.5 " mandrel bent pipe
Magnaflow Resonator : 10426
Magnaflow Cat : 94106
Magnaflow Muffler : 14862
Its a bit loud..actually a lot loud, i see other cars with hugh 'turbo' exhaust, like 6" hole and doesnt sound as loud as mine..which only has like a 3" twin tip. So far 3 people asked me when i'm going to get that broken muffler fixed..i had to explain its not..![Frown](https://maxima.org/forums/images/smilies/frown.gif)
As soon as i get my tranny problem fixed i'm going to get a G35 muffler and boot the magnaflow
Sorry for the unedited video.
Interior
(Window Closed)
http://www.youtube.com/watch?v=K7TIBjb8-S0
(Window Open)
http://www.youtube.com/watch?v=Gf_SUhZsdCA
My Setup
Warpspeed Y pipe
2.5 " mandrel bent pipe
Magnaflow Resonator : 10426
Magnaflow Cat : 94106
Magnaflow Muffler : 14862
Its a bit loud..actually a lot loud, i see other cars with hugh 'turbo' exhaust, like 6" hole and doesnt sound as loud as mine..which only has like a 3" twin tip. So far 3 people asked me when i'm going to get that broken muffler fixed..i had to explain its not..
![Frown](https://maxima.org/forums/images/smilies/frown.gif)
As soon as i get my tranny problem fixed i'm going to get a G35 muffler and boot the magnaflow
Sorry for the unedited video.
imma just get a regular muffler from pep boys to tone down the noise.
![Mad](https://maxima.org/forums/images/smilies/mad.gif)
#74
i think my torque converter isnt locking?
i post a video on this thread a few mins ago:
http://forums.maxima.org/3rd-generat...-3rd-gear.html
NYC_INK: Look into the G35 muffler, i think its what we need
. Honestly i have to take my foot off the gas when i'm about to past a cop in long island lol.
i post a video on this thread a few mins ago:
http://forums.maxima.org/3rd-generat...-3rd-gear.html
NYC_INK: Look into the G35 muffler, i think its what we need
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#76
lol! i love the nice deep tones from outside the car..but inside the car creates like an tunnel effect and it kills my ears..as you see from one of my videos i keep the music turned up real loud..so that helps..
#77
second...
the madrell exhaust system, is it a good system for the VG30E?
Cause they have answered my question:
"Mandrel Exhaust Systems .Com Hi pa yes we do offer international shipping if you would like to call the number is 001 305 378 9337 or you can me email Sales@trubendz.com" Jehaa
![Big Grin](https://maxima.org/forums/images/smilies/biggrin.gif)
#79
I like the sound! Is it the same as the link before?
second...
the madrell exhaust system, is it a good system for the VG30E?
Cause they have answered my question:
"Mandrel Exhaust Systems .Com Hi pa yes we do offer international shipping if you would like to call the number is 001 305 378 9337 or you can me email Sales@trubendz.com" Jehaa![Big Grin](https://maxima.org/forums/images/smilies/biggrin.gif)
second...
the madrell exhaust system, is it a good system for the VG30E?
Cause they have answered my question:
"Mandrel Exhaust Systems .Com Hi pa yes we do offer international shipping if you would like to call the number is 001 305 378 9337 or you can me email Sales@trubendz.com" Jehaa
![Big Grin](https://maxima.org/forums/images/smilies/biggrin.gif)
#80
i think my torque converter isnt locking?
i post a video on this thread a few mins ago:
http://forums.maxima.org/3rd-generat...-3rd-gear.html
NYC_INK: Look into the G35 muffler, i think its what we need
. Honestly i have to take my foot off the gas when i'm about to past a cop in long island lol.
i post a video on this thread a few mins ago:
http://forums.maxima.org/3rd-generat...-3rd-gear.html
NYC_INK: Look into the G35 muffler, i think its what we need
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
ill look into the g35 muffler. i was looking at those aftermarket mufflers pep boys carry that look like stock mufflers. they have a good selection from regular to high flow ones and they have can crappers like the one i have.