3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

Think the steering rack went bad

Old Feb 9, 2014 | 07:43 PM
  #1  
jbbons25's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Aug 2009
Posts: 695
From: Los Angeles, CA
Think the steering rack went bad

Here's a video of my car making noise when I turn the steering wheel to see if you guys can confirm if it is the steering rack or something else. I wanna say that it's the steering rack because the noise is not coming from the suspension (springs, struts, ball joints) ATF is on level on the power steering reservoir and I replaced the steering rack bushings last June.



Last edited by jbbons25; Feb 10, 2014 at 08:10 PM.
Old Feb 10, 2014 | 03:46 PM
  #2  
chrome91's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2009
Posts: 7,620
From: Edmonton, Alberta
i would guess its maybe something in the steering shaft itself
Old Feb 10, 2014 | 06:22 PM
  #3  
Levsimus's Avatar
Member
iTrader: (1)
 
Joined: May 2012
Posts: 221
My Mustang did that awful screeching, but replacing the inner tie rods and ball joints/ outer tie rod ends solved it. No idea which was the cause of the problem though.
Old Feb 11, 2014 | 01:39 AM
  #4  
jbbons25's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Aug 2009
Posts: 695
From: Los Angeles, CA
Originally Posted by Levsimus
My Mustang did that awful screeching, but replacing the inner tie rods and ball joints/ outer tie rod ends solved it. No idea which was the cause of the problem though.
Double-checking and I did the inner tie rod ends (moog) along with the bushings. I wonder if the tie rod ends prematurely failed. I will say that I haven't replaced the struts at least 5 years ago, but I do believe the noise is coming from right in the center.

I also remembered that the rack is remaned and installed around that same time as the struts, I think way before that.

Gotta find someone to steer while I pinpoint the noise.
Old Feb 11, 2014 | 08:12 AM
  #5  
Levsimus's Avatar
Member
iTrader: (1)
 
Joined: May 2012
Posts: 221
Does it do it when going over bumps as well or only doing it when turning the wheel? Only stationary or even when moving?
Old Feb 11, 2014 | 02:39 PM
  #6  
jbbons25's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Aug 2009
Posts: 695
From: Los Angeles, CA
It only makes the noise when turning the wheel. So far I only paid close attention when stationary and it makes the noise at idle and around 3k RPM. When moving, I only noticed when I make turns from a stop.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rbarnes
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
4
Dec 31, 2015 06:29 PM
mikeg75
4th Generation Maxima (1995-1999)
12
Nov 30, 2015 05:12 PM
ChrisIve
5th Generation Maxima (2000-2003)
3
Sep 21, 2015 12:01 AM
ColdCananda
6th Generation Maxima (2004-2008)
3
Sep 20, 2015 10:45 PM
Bluenissan
Audio and Electronics
0
Sep 20, 2015 08:54 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 10:55 PM.