**LED Tails** 97-99only
#85
Just thought I'd share a few more pics.... first two pics are from when we left the huge Stillen meet last Saturday and were going to Hooters for the afterparty. I'm so glad I splurged for these.... Kevlo's LED's are teh hotness
I'm surprised more people didn't jump all over these.....
I'm surprised more people didn't jump all over these.....
#91
I have just finished installing the boards for Digital. Unless I was doing something wrong, they were a little bit of a paine to set in place.
The control board is connected to the LED board with a very short wire. As a result, the LED board was in the way and would not allow me to get clear access inside the tail light, so that I would position the control board (and the intensity rotary ****) in a convinient manner. Thus, I cut the wires and soldered the longer ones along with spade connectors. Secondly to get the access to the rotary ****, in 2 left tails I belive, I had to drill extra holes (maybe that's an idea in the first place).
Otherwise - great work Kev.
Vlad
The control board is connected to the LED board with a very short wire. As a result, the LED board was in the way and would not allow me to get clear access inside the tail light, so that I would position the control board (and the intensity rotary ****) in a convinient manner. Thus, I cut the wires and soldered the longer ones along with spade connectors. Secondly to get the access to the rotary ****, in 2 left tails I belive, I had to drill extra holes (maybe that's an idea in the first place).
Otherwise - great work Kev.
Vlad
#92
Guest
Posts: n/a
Good fix, I know exactly what your talking about.
Originally Posted by Ladzio
I have just finished installing the boards for Digital. Unless I was doing something wrong, they were a little bit of a paine to set in place.
The control board is connected to the LED board with a very short wire. As a result, the LED board was in the way and would not allow me to get clear access inside the tail light, so that I would position the control board (and the intensity rotary ****) in a convinient manner. Thus, I cut the wires and soldered the longer ones along with spade connectors. Secondly to get the access to the rotary ****, in 2 left tails I belive, I had to drill extra holes (maybe that's an idea in the first place).
Otherwise - great work Kev.
Vlad
The control board is connected to the LED board with a very short wire. As a result, the LED board was in the way and would not allow me to get clear access inside the tail light, so that I would position the control board (and the intensity rotary ****) in a convinient manner. Thus, I cut the wires and soldered the longer ones along with spade connectors. Secondly to get the access to the rotary ****, in 2 left tails I belive, I had to drill extra holes (maybe that's an idea in the first place).
Otherwise - great work Kev.
Vlad
#93
Originally Posted by Kevlo911
This is quite sad. In case anyone wonders WHY company's do not want to make Maxima products or want to charge a hefty amount for them, THIS IS WHY! Looks like I am going to be lucky to make my money back on this. This will be my LAST investment into the Maxima community... I hope people are saving money, I know it has been less than a week but the interest on this is very weak. I hope people are waiting to get paid or something
#94
Thread Starter
Kevlo for President
iTrader: (36)
Joined: Dec 2000
Posts: 35,779
From: Lake Orion, MI
Originally Posted by Ladzio
I have just finished installing the boards for Digital. Unless I was doing something wrong, they were a little bit of a paine to set in place.
The control board is connected to the LED board with a very short wire. As a result, the LED board was in the way and would not allow me to get clear access inside the tail light, so that I would position the control board (and the intensity rotary ****) in a convinient manner. Thus, I cut the wires and soldered the longer ones along with spade connectors. Secondly to get the access to the rotary ****, in 2 left tails I belive, I had to drill extra holes (maybe that's an idea in the first place).
Otherwise - great work Kev.
Vlad
The control board is connected to the LED board with a very short wire. As a result, the LED board was in the way and would not allow me to get clear access inside the tail light, so that I would position the control board (and the intensity rotary ****) in a convinient manner. Thus, I cut the wires and soldered the longer ones along with spade connectors. Secondly to get the access to the rotary ****, in 2 left tails I belive, I had to drill extra holes (maybe that's an idea in the first place).
Otherwise - great work Kev.
Vlad
And I am NO LONGER selling these btw...