A little help req
10-21-2002, 07:56 AM
#1
Member
Thread Starter
Join Date: Mar 2002
Posts: 50
A little help req
I had my car on a rolling road on Saturday and need a little info on weather the figures below are right or and i loosing power somewhere
Car: '95 Nissan Cefiro 2lt Auto
Milage: 75K miles
Mods: Cat back Powerflow exhaust system, Cat bypass pipe, KnN induction kit
Maximum Power Speed 6571Rpm (88.5Mph)
Power at Flywheel: 124.4Bhp
Power at Wheels: 91.7Bhp
Power Loss: 32.7
Max Torque Speed: 4195Rpm (56.5Mph)
Max Engine Torque: 124.5 lb ft
Max road speed reached: 92.5Mph
Max engine speed reached: 6868Rpm
Temp: 14 degrees C
Barometric pressure: 1014mb
Any help on the above would be grateful, ohh and the test took place in Ireland (I was told to mention this before as my car has a different spec to the ones in the US)
Car: '95 Nissan Cefiro 2lt Auto
Milage: 75K miles
Mods: Cat back Powerflow exhaust system, Cat bypass pipe, KnN induction kit
Maximum Power Speed 6571Rpm (88.5Mph)
Power at Flywheel: 124.4Bhp
Power at Wheels: 91.7Bhp
Power Loss: 32.7
Max Torque Speed: 4195Rpm (56.5Mph)
Max Engine Torque: 124.5 lb ft
Max road speed reached: 92.5Mph
Max engine speed reached: 6868Rpm
Temp: 14 degrees C
Barometric pressure: 1014mb
Any help on the above would be grateful, ohh and the test took place in Ireland (I was told to mention this before as my car has a different spec to the ones in the US)
10-21-2002, 08:32 AM
#2
What is your power supposed to be?
Our cars have the 3 liter V6, while I think yours has a 2 liter...
We have 190hp and 205 lb-ft of torque stock. With an auto trans we usually put down about 150hp to the wheels, stock.
Our cars have the 3 liter V6, while I think yours has a 2 liter...
We have 190hp and 205 lb-ft of torque stock. With an auto trans we usually put down about 150hp to the wheels, stock.
10-21-2002, 04:54 PM
#3
Member
Thread Starter
Join Date: Mar 2002
Posts: 50
Originally posted by mzmtg
What is your power supposed to be?
What is your power supposed to be?
I've tried a search but 2 no avail so does anyone know of a link r a site that would have this info ???
Cheers
10-21-2002, 05:17 PM
#4
www.bignissans.org.uk
Specs on the UK-market 2.0 VQ20DE and 3.0 VQ30DE are found here:
http://www.btinternet.com/~d.brooks1.../a32/specs.htm
Specs on the UK-market 2.0 VQ20DE and 3.0 VQ30DE are found here:
http://www.btinternet.com/~d.brooks1.../a32/specs.htm
10-22-2002, 12:53 PM
#5
Member
Thread Starter
Join Date: Mar 2002
Posts: 50
Cheers for the link
Now i have a bigger problem according to the site my QX should be pushing out 140bhp @ 6400rpm and 177lbft @ 4195rpm but as you can see from above mine is only pushing out 124.4bhp @6571rpm and 124.5lbft @ 4195rpm, thats a loss of 15.6bhp and 52.5lbft of torque
.
Is there any mod on the car that would have reduced the figures above by that much ???
Now i have a bigger problem according to the site my QX should be pushing out 140bhp @ 6400rpm and 177lbft @ 4195rpm but as you can see from above mine is only pushing out 124.4bhp @6571rpm and 124.5lbft @ 4195rpm, thats a loss of 15.6bhp and 52.5lbft of torque
.Is there any mod on the car that would have reduced the figures above by that much ???
Thread
Thread Starter
Forum
Replies
Last Post
96i30azn
4th Generation Maxima (1995-1999)
11
08-28-2009 02:08 PM
Nealoc187
4th Generation Classifieds (1995-1999)
7
07-14-2007 10:41 PM
Nealoc187
4th Generation Classifieds (1995-1999)
6
06-22-2007 02:25 PM