Will IS300 wheels fit my max?
#6
Re: the guy selling them put
Originally posted by hlh0501
they are 5 lug 5x4.5 if that means anything to anyone??
they are 5 lug 5x4.5 if that means anything to anyone??
#7
Re: Moda R6's
Originally posted by hlh0501
I figured the IS300 wheels would be the cheaper option though
I figured the IS300 wheels would be the cheaper option though
i bet the is300 peoples gonna have a link to this, makin fun, cuz maxima peoples want their wheelies
#9
I believe they will not fit
I tried on a set of GS400 wheels one time. I found a few sets with tires for $500. The lug pattern fits well, but that's not the problem. On the brake rotor extending to the wheel studs is a wheel hub. They protect the wheel bearings and such. This hub is the cause for it to not fit. The hub is not a perfect cylinder. It is a few millimeters too large in diameter at the base. The IS300 wheel should fit about half way on. That's not enough to get 2 of the 5 lugs on. However, I figure you could bore out the center of each IS300 rim about 5mm in diameter and 2cm deep. I was thinking about doing this too with the GS400 wheels.
#10
Re: I believe they will not fit
Originally posted by Kevin Wong
I tried on a set of GS400 wheels one time. I found a few sets with tires for $500. The lug pattern fits well, but that's not the problem. On the brake rotor extending to the wheel studs is a wheel hub. They protect the wheel bearings and such. This hub is the cause for it to not fit. The hub is not a perfect cylinder. It is a few millimeters too large in diameter at the base. The IS300 wheel should fit about half way on. That's not enough to get 2 of the 5 lugs on. However, I figure you could bore out the center of each IS300 rim about 5mm in diameter and 2cm deep. I was thinking about doing this too with the GS400 wheels.
I tried on a set of GS400 wheels one time. I found a few sets with tires for $500. The lug pattern fits well, but that's not the problem. On the brake rotor extending to the wheel studs is a wheel hub. They protect the wheel bearings and such. This hub is the cause for it to not fit. The hub is not a perfect cylinder. It is a few millimeters too large in diameter at the base. The IS300 wheel should fit about half way on. That's not enough to get 2 of the 5 lugs on. However, I figure you could bore out the center of each IS300 rim about 5mm in diameter and 2cm deep. I was thinking about doing this too with the GS400 wheels.
Hey....i know of 2 max owners here in austin that have got the GS400 rims on their cars. Takes a little work, but can be done...they look nice on the max...don't they Kenneth?
#12
Re: Re: Re: I believe they will not fit
Originally posted by Kenneth
some machining needed... nicer than cameron [/I]
Originally posted by Car With No Name
they look nice on the max...don't they Kenneth?
they look nice on the max...don't they Kenneth?
And I'm beholding...
#16
I believe they will not fit........
Originally posted by Kenneth
ooops, rather own
ooops, rather own
Whats up guys, the 17" GS400 wheel should fit onto your 4th gen. or newer Max's with no problem. I have a set of four for sale on this site.(Silver 17's with 235/45/ZR's at 3/4 tread life)) You may want to find/or use a center cap other than one that displays the Lexus emblem. They are in excellent condition, Ill take $450, leave a reply post with a way that you can be contacted. Thanks, Sneaky
#17
Re: Re: Re: Re: Re: Re: Re: I believe they will not fit
Originally posted by Car With No Name
Tiny still has his stock 17's for the GS400. I think he wants to sell them...hmmmm....takers?
Tiny still has his stock 17's for the GS400. I think he wants to sell them...hmmmm....takers?
I'll take her
#19
Re: Re: Re: Re: Re: Re: Re: Re: I believe they will not fit
Originally posted by Kenneth
yea, i know... more money than his 93 se?
keep her... see you tomorrow rob
Originally posted by Car With No Name
Tiny still has his stock 17's for the GS400. I think he wants to sell them...hmmmm....takers?
Tiny still has his stock 17's for the GS400. I think he wants to sell them...hmmmm....takers?
I'll take her
OK dude....
Hey Kenneth, did you see the post above your last...450 for a set of GS4 wheel's and tire's? not bad.
#23
Re: I believe they will not fit........
Originally posted by Sneakymax
Whats up guys, the 17" GS400 wheel should fit onto your 4th gen. or newer Max's with no problem. I have a set of four for sale on this site.(Silver 17's with 235/45/ZR's at 3/4 tread life)) You may want to find/or use a center cap other than one that displays the Lexus emblem. They are in excellent condition, Ill take $450, leave a reply post with a way that you can be contacted. Thanks, Sneaky
Originally posted by Kenneth
ooops, rather own
ooops, rather own
Whats up guys, the 17" GS400 wheel should fit onto your 4th gen. or newer Max's with no problem. I have a set of four for sale on this site.(Silver 17's with 235/45/ZR's at 3/4 tread life)) You may want to find/or use a center cap other than one that displays the Lexus emblem. They are in excellent condition, Ill take $450, leave a reply post with a way that you can be contacted. Thanks, Sneaky
Hey Sneaky, do those rims have any nicks or scratches on them? Have you ever hit a curb?
#25
Re: Re: I believe they will not fit........
Originally posted by Car With No Name
Hey Sneaky, do those rims have any nicks or scratches on them? Have you ever hit a curb?
Originally posted by Sneakymax
Whats up guys, the 17" GS400 wheel should fit onto your 4th gen. or newer Max's with no problem. I have a set of four for sale on this site.(Silver 17's with 235/45/ZR's at 3/4 tread life)) You may want to find/or use a center cap other than one that displays the Lexus emblem. They are in excellent condition, Ill take $450, leave a reply post with a way that you can be contacted. Thanks, Sneaky
Originally posted by Kenneth
ooops, rather own
ooops, rather own
Whats up guys, the 17" GS400 wheel should fit onto your 4th gen. or newer Max's with no problem. I have a set of four for sale on this site.(Silver 17's with 235/45/ZR's at 3/4 tread life)) You may want to find/or use a center cap other than one that displays the Lexus emblem. They are in excellent condition, Ill take $450, leave a reply post with a way that you can be contacted. Thanks, Sneaky
Hey Sneaky, do those rims have any nicks or scratches on them? Have you ever hit a curb?
No curbs here. Very few nicks or scratches, I am very particular.(Im a Max owner myself) The rims are in excellent condition, I will guarantee any Max owner who buys these at $450 will feel they got a good deal.
Thanks, Sneakymax
#28
Who has them on their maxima's now?
Before I tried on the set of GS400 wheels, I called tirerack.com to see if they'd fit. They told me that the center hub is too large of the maxima and it wouldn't fit. I tried it myself and it would not fit. Those who have them on the Max, did you alter the wheel or hub at all. I'm going to buy a set and bore out a centimeter of the wheels, center to make them fit.
#29
Re: Who has them on their maxima's now?
Originally posted by Kevin Wong
Before I tried on the set of GS400 wheels, I called tirerack.com to see if they'd fit. They told me that the center hub is too large of the maxima and it wouldn't fit. I tried it myself and it would not fit. Those who have them on the Max, did you alter the wheel or hub at all. I'm going to buy a set and bore out a centimeter of the wheels, center to make them fit.
Before I tried on the set of GS400 wheels, I called tirerack.com to see if they'd fit. They told me that the center hub is too large of the maxima and it wouldn't fit. I tried it myself and it would not fit. Those who have them on the Max, did you alter the wheel or hub at all. I'm going to buy a set and bore out a centimeter of the wheels, center to make them fit.
Hi Kevin,
Mike(2 posts above) has them on his max. Charlie(another max owner here in Austin) also has them on his car. The rims look great on their cars. Yes, it does take some machining of the GS rim. Yes, ask Mike about it, he knows alot about what your trying to do. He's a great guy and I'm sure he'll try to help you out. Just in case he doesn't see this post again, I'll follow up and let him know about your inquiry.
Chris, a good friend of mine, has already sold his set to another max owner. If you go to http://www.clublexus.com, you'll be able to find a bunch of poeple selling them due to purchasing aftermarket rims on their GS400's. Try to bring them down though, some of the prices are a little steep.
Let me know if you need anything else.
Rob
#30
Re: Who has them on their maxima's now?
Originally posted by Kevin Wong
Before I tried on the set of GS400 wheels, I called tirerack.com to see if they'd fit. They told me that the center hub is too large of the maxima and it wouldn't fit. I tried it myself and it would not fit. Those who have them on the Max, did you alter the wheel or hub at all. I'm going to buy a set and bore out a centimeter of the wheels, center to make them fit.
Before I tried on the set of GS400 wheels, I called tirerack.com to see if they'd fit. They told me that the center hub is too large of the maxima and it wouldn't fit. I tried it myself and it would not fit. Those who have them on the Max, did you alter the wheel or hub at all. I'm going to buy a set and bore out a centimeter of the wheels, center to make them fit.
"The center bore needs to be machined to match the Nissan hub, which is 66.1mm. This must be done perfectly, as the wheels are hubcentric. Other than that, you must find some lug nuts that have the Nissan thread pitch but the Lexus type shank and washer. I found them at Auto Zone."
#32
Re: I want to do this!
Originally posted by hlh0501
how much would it cost to get the GS wheels bored out so they would be ready to go on my max? And does /will anyone post some pics of what it looks like? Thanks!
how much would it cost to get the GS wheels bored out so they would be ready to go on my max? And does /will anyone post some pics of what it looks like? Thanks!
When more of this is worked out, we'll post up some info for you...soon.
As far as pics, I don't have the ability to post the pics up here, but a friend might be able to. It'll also depend if we can get together with one of the max's that already have the rims on and take the pics. We'll see....
believe me, it does look really good.
#33
Oh, by the way.....
To all Austin Maxima.org members, We are going to go to Seguin on the 12th (weather permitting) for some track (1/4 mile) running!!! All are welcome to come as well as others from the texas area(close enough to feel you can drive there on friday the 12th for the night). I would expect that there might be some from San Antonio and Houston. WHOMEVER...So far there are several interested in Austin...
I will post again about this meet.
I will post again about this meet.
Thread
Thread Starter
Forum
Replies
Last Post
dank4us
7th Generation Maxima (2009-2015)
34
06-10-2024 03:45 AM
Maxima_Joe
4th Generation Classifieds (1995-1999)
3
10-15-2015 08:01 PM
Cant_Get_Ryte
5th Generation Classifieds (2000-2003)
3
08-28-2015 06:41 AM