To all who has OBX or interested in one...
#41
Will measure mine on Tuesday
Its already on, but wont' take long to take the muffler off and slap a measuring tape on it. I didn't even think to measure it before the install However, it did feel bigger than my stock pipe, but that is as accurate as a butt dyno!! lol
Either way, doesn't seem like performance gains will be any different, and it looks and sounds good, so.....
Either way, doesn't seem like performance gains will be any different, and it looks and sounds good, so.....
#42
i paid a week and half ago. not with original GD
ill give him this week
ill give him this week
Originally posted by tzmanles
dam, u still didnt get yours yet?? everyones received, and installed by now....u better do some research
dam, u still didnt get yours yet?? everyones received, and installed by now....u better do some research
#43
Originally posted by sil SE
i paid a week and half ago. not with original GD
ill give him this week
i paid a week and half ago. not with original GD
ill give him this week
#45
Originally posted by Mishmosh
Yeah, OK. My statements were in the context of the "$150" cat back. No doubt a reputable shop like Budget can fashion you a superlative B-pipe with Stainless and mandrel bends for a reasonable amount. South of the border though, I think you will be hard pressed to find one of these for less than $300. Of course, the OBX is not installed so you can tack on some premium there. With regard to customization though, I think most people have no idea how many resonators they want (or if they can live without them) or things of that nature until the cat-back is installed and they are not happy with the sound. Then they will be paying extra for such modifications done to it, eg. adding a resonator or going with a different muffler. Not quite the same thing for comparison purposes.
Yeah, OK. My statements were in the context of the "$150" cat back. No doubt a reputable shop like Budget can fashion you a superlative B-pipe with Stainless and mandrel bends for a reasonable amount. South of the border though, I think you will be hard pressed to find one of these for less than $300. Of course, the OBX is not installed so you can tack on some premium there. With regard to customization though, I think most people have no idea how many resonators they want (or if they can live without them) or things of that nature until the cat-back is installed and they are not happy with the sound. Then they will be paying extra for such modifications done to it, eg. adding a resonator or going with a different muffler. Not quite the same thing for comparison purposes.
#46
Originally posted by spiff56747
I just measured my OBX, its exactly 2.25 inch inside diameter. Anybody who says its 2.5 is in denial.
Also, if you haven't received yours yet, email ssautochrome, he sent me a fedex tracking page for the 2 packages.
I just measured my OBX, its exactly 2.25 inch inside diameter. Anybody who says its 2.5 is in denial.
Also, if you haven't received yours yet, email ssautochrome, he sent me a fedex tracking page for the 2 packages.
#47
Originally posted by erty67
I always thought pipe was measured by outer diameter
I always thought pipe was measured by outer diameter
hmmm...how come yours...well, hmmmm
#48
after hearing that all these people are not entirely satisfied with their OBX purchase. I've been seriously considering it.
I dont entirely understand this low hanging thing. How easy is it to fix?
I dont entirely understand this low hanging thing. How easy is it to fix?
#50
my own opinion about the obx
Hey guys did you guys have to do a little extra work to keep yours from rattleling..When I had mine on my max it vibrated a bit because Obx didnt weld a post to the b pipe to hang it to the factory ruber hanger..I had a very annoying vibrating sound coming from the back and the middle of the car.I had to go back under the car and do some looking around and adjustments..I was very unhappy with this catback,Its not a direct bolton like they advertise it..the tailpipe has to be ghetto rigged to get it from going to the left,also the b pipe hangs very low and has to be lifted by taking to a shop to heat it up,Also the factory hanger post dont fit on the obx(the one on the b pipe)I dont call all this a direct bolt on if I ran into all this fittment issues,Also some obx cats are louder then others,and some are 2.5 and some 2.25..In my opinion this catbacks have serious defects that Obx sould be aware of..If you have this catback and you dont agree that this setup kinda sucks then you are in denial..I would have gladly,spent 100$extra to get a better setup.Im trying to sell mine now,but If I dont I think I will call obx and try to get my money back ,this cat back comes with a warranty.And Im going to tell them about all the fittemt isses and diffrent b pipe sizes,maybe then they will correct the defects..In my own opinion yes this is a good looking cat but not all of them are the same,many of us got diffrent cats either some are louder or some have smaler b pipes..I just decided to keep my stock b pipe and muffler.I love the sound with the stock back on..very quite no loud annoying drone in lower rpms,when I had the obx I had a loud drone from 1500 to 2000 rpms..I tried every thing to get rid of the drone but I was unable too.I dont understand how people say its very quite when its not,Its quite at higher speeds ,but for around town driving it is loud and very annoying..makes you think your driving a clunker car because of the loud drone..if everyone here reported all the problems they have had with theirs, then you would agree with me that this is not a good cat,must people are just in denial ..its an ok cat back but it would be a great cat back if the fittment issues and noise issues were corrected..I know I will get flamed by people who love theirs but hey, some of us hated ours.
#51
Re: my own opinion about the obx
Originally posted by ivan25
..its an ok cat back but it would be a great cat back if the fittment issues and noise issues were corrected..I know I will get flamed by people who love theirs but hey, some of us hated ours.
..its an ok cat back but it would be a great cat back if the fittment issues and noise issues were corrected..I know I will get flamed by people who love theirs but hey, some of us hated ours.
#53
I really could care less right now what anyone says about the OBX system. Mine is just fine and I love it.
The minor things I had to do for it to fit perfect were not a problem. It looks great and the sound is very quiet considering I have a y-pipe. There never were any vibrations that had to be fixed.
The minor things I had to do for it to fit perfect were not a problem. It looks great and the sound is very quiet considering I have a y-pipe. There never were any vibrations that had to be fixed.
#54
Originally posted by meccanoble
WTF, its a 2.5" piping, i measured mine myself, in fact i think i even took a pic. Maybe thats why yours is so loud? you dont have the right one? its 2.5", instead of stating facts of it being 2.25", you should have made a post asking what the size of everyone's is. You seen me and arrafio talking about it being 2.5" in the past and its advertised everywhere as 2.5", why would u just throw out the fact that its 2.25" without proper research?
WTF, its a 2.5" piping, i measured mine myself, in fact i think i even took a pic. Maybe thats why yours is so loud? you dont have the right one? its 2.5", instead of stating facts of it being 2.25", you should have made a post asking what the size of everyone's is. You seen me and arrafio talking about it being 2.5" in the past and its advertised everywhere as 2.5", why would u just throw out the fact that its 2.25" without proper research?
#55
Originally posted by RastaManMax
lol, look at the pic above, that's proper enough research for me, also, look at everyone elses post about it being 2.25"... Maybe you just got lucky and got 2.5" ...
lol, look at the pic above, that's proper enough research for me, also, look at everyone elses post about it being 2.25"... Maybe you just got lucky and got 2.5" ...
#56
Originally posted by meccanoble
ah well, like arrafio said, i got the real deal, i feel unfortunate about those that didnt....but if your happy wit what u got, good for u
ah well, like arrafio said, i got the real deal, i feel unfortunate about those that didnt....but if your happy wit what u got, good for u
#57
Originally posted by luckee2bhere
OK SO...I'll just ask for the "Arrafio and Meccanoble deal" when I call to order mine.
OK SO...I'll just ask for the "Arrafio and Meccanoble deal" when I call to order mine.
#58
i'm with this dude on his measurements.
i didnt even get mine yet but i think everyone expected WAY too much. the catback (under this GD price) costs less than 300 bucks.
"problems" :
1) tip diameter- why does it really matter anyway? let it go
2) fitment: it hangs low..if you look closely, you'll see the way pipes hang on some factory cars! looks like its about to bang on the road. (not saying its a good thing but it can be dealt with)
3) this debate about bpipe diameter..ok its bad if they say 2.5" and its not. but seriously, if you all get blown at some point then hopefully youll have a 2.5", but if youre going to stay n/a then SCREW it. lots of catbacks for our cars come 2.25" and its great for our normal setups.
screw noise, screw looks, screw it all.
does anyone have pics of the b pipe diameter yet?
i didnt even get mine yet but i think everyone expected WAY too much. the catback (under this GD price) costs less than 300 bucks.
"problems" :
1) tip diameter- why does it really matter anyway? let it go
2) fitment: it hangs low..if you look closely, you'll see the way pipes hang on some factory cars! looks like its about to bang on the road. (not saying its a good thing but it can be dealt with)
3) this debate about bpipe diameter..ok its bad if they say 2.5" and its not. but seriously, if you all get blown at some point then hopefully youll have a 2.5", but if youre going to stay n/a then SCREW it. lots of catbacks for our cars come 2.25" and its great for our normal setups.
screw noise, screw looks, screw it all.
does anyone have pics of the b pipe diameter yet?
Originally posted by willy431
I received my cat back in the group buy and my pipes are 2.5 inches OD as stated in the ad measured with my Mitutoyo digital caliper. My tip measures just a tick under 4 inch---3.780.
Mark
I received my cat back in the group buy and my pipes are 2.5 inches OD as stated in the ad measured with my Mitutoyo digital caliper. My tip measures just a tick under 4 inch---3.780.
Mark
Thread
Thread Starter
Forum
Replies
Last Post
ToTheMax305
7th Generation Maxima (2009-2015)
0
09-23-2015 09:11 PM