Where did you mount your HID ballasts? Each ballast has a mount with 2 screw holes. I was wondering if there is a way to mount the ballasts without doing any drilling. Did you guys all even use the screw holes or find another way to mount the ballasts behind the headlights under the hood?

Thanks.

I used zip ties to mouth the igniter under the frame where the bulb goes and i mounted the ballast by the bumper under the headlight.

Trance

i used zipties also but i tied it to 2 different relay boxes, one on the left and one on the right.... kinda sux if you have to actually get to the relays... but i can always cut the zipties off and put on new ones

I mounted one behind the relay box with small screws and the other underneath the fuse box next to the battery with small screws. But make sure you insulate the connections with some electrical grease so no water or corrosion get's to it.
The ballast's are out of the way and safe from damage.

zip ties and mounted them under the headlights to the bumper support if i remember correctly.

Did you have to remove the bumper cover or headlights?