nismos14

iTrader: (56)

the clutch will not re-engage now.... i topped off the fluid and i made sure the bleeder valves were tight... anybody kno whats wrong??

PedalKick

Huh? Won't re-engage? If the pedal is up, the clutch is engaged. If things are proper and the pedal is down, the clutch is dis-engaged. So what are the exact symptoms of your trouble?

nismos14

iTrader: (56)

ok when u are doing the bleeding the clutch will just drop down and there will be no pressure for it to come back up, well now with everything closed back up and im about to start the car or i do start the car, it starts and the clutch just stays on the ground with my foot of it

TooMAX

iTrader: (1)

Pull it up with your hand or foot when bleeding. Push down and repeat to evacuate the old fluid through the bleed screw on the slave cylinder. There is also an upper bleed screw near the top of the fender that you may not have noticed. If it still doesn't have pressure to pop up after tightening the bleed screws and pushing down with your foot, then you're not done bleeding the line.

nismos14

iTrader: (56)

i got it i just wasnt bleeding properly.... grrrr lol