4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Car died on me today. Need some help

Thread Tools
 
Search this Thread
 
Old 09-16-2003, 05:14 PM
  #1  
Needs non-Maxima Friends
Thread Starter
iTrader: (25)
 
amixam98's Avatar
 
Join Date: Jan 2001
Posts: 3,017
Car died on me today. Need some help

I was pulling out of my driveway tonight when I noticed my RPM was bouncing around. After driving for like 5 mins, my car finally shut down. Anyone have any clue? Is it my MAF? This car is stressing me out more and more everyday. My car is still overheating and now this.
amixam98 is offline  
Old 09-16-2003, 06:22 PM
  #2  
Senior Member
 
DaddyMac's Avatar
 
Join Date: Jun 2002
Posts: 631
Yes, sell the car and buy an Accord with a Boeing wing and swap your rims, you'll be set
DaddyMac is offline  
Old 09-16-2003, 09:00 PM
  #3  
Senior Member
 
DaThrillr's Avatar
 
Join Date: Jan 2002
Posts: 1,422
i remember a friends car was having this problem,,,, or something like it....

if u have an intake, there is a sensor that was attached to the OEM box ( not the air temp sensor) it is labeled BOOST SENSOR .. if this is damaged then ur idle will be all outa wack and drive your car crazy.... make sure the wires arnt melted and the senors itself isnt cracked or melted... most people just leave this sensor dangling in the engine bay and this causes the sensor to break,,,,

im not 100% percent this is ur case just trying to help alittle
DaThrillr is offline  
Old 09-17-2003, 08:50 AM
  #4  
Needs non-Maxima Friends
Thread Starter
iTrader: (25)
 
amixam98's Avatar
 
Join Date: Jan 2001
Posts: 3,017
Thanks! ....
amixam98 is offline  
Old 09-17-2003, 08:57 AM
  #5  
Donating Maxima.org Member
iTrader: (1)
 
maxNYC's Avatar
 
Join Date: Nov 2002
Posts: 992
I would have thought it could have been the Mass Airflow Sensor with the intake.

My car coincidentally shut down last saturday. Turns out i had moisture from the A/C collecting on my ECU. Had to reset it and now its working again. Will probably take it apart this coming weekend to seal it up or something.
maxNYC is offline  
Old 09-17-2003, 03:52 PM
  #6  
Senior Member
 
DaThrillr's Avatar
 
Join Date: Jan 2002
Posts: 1,422
Originally Posted by amixam98
Thanks! ....
did this work??... was i right???...
DaThrillr is offline  
Old 09-17-2003, 06:10 PM
  #7  
Needs non-Maxima Friends
Thread Starter
iTrader: (25)
 
amixam98's Avatar
 
Join Date: Jan 2001
Posts: 3,017
Originally Posted by DaThrillr
did this work??... was i right???...
The wires leading to my MAF are loose or melted . When I touched the wires, my RPM would start bouncing around.
amixam98 is offline  
Old 09-17-2003, 09:07 PM
  #8  
Senior Member
 
DaThrillr's Avatar
 
Join Date: Jan 2002
Posts: 1,422
ok nice to see u found out the problem...
DaThrillr is offline  
Old 09-18-2003, 04:03 AM
  #9  
Donating Maxima.org Member
iTrader: (1)
 
maxNYC's Avatar
 
Join Date: Nov 2002
Posts: 992
good looking out.
maxNYC is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
06-16-2019 01:35 AM
MikesChevelle
Audio and Electronics
4
09-28-2015 08:14 PM
N2deep
4th Generation Maxima (1995-1999)
2
08-16-2015 08:30 PM
Maxboy23
5th Generation Maxima (2000-2003)
7
08-11-2015 11:59 AM



Quick Reply: Car died on me today. Need some help



All times are GMT -7. The time now is 05:20 PM.