Installing an Alarm -- Couple of ???
#1
I'm putting an alarm in my 95 SE and the instructions call for one of the wires to be attached to a 12v source that is hot when the ingnition is on or in the accessories position. Also, it has an LED that I'll need to drill a 3/8" hole somewhere in the dash to mount.
Does anyone have any ideas as to the best power source and location for the warning LED? I don't want to drill a hole somewhere where it'll do irreparable damage to the dash. I'll need to be able to get to the LED wiring from behind, so it has to be fairly accessible, as well.
I've had cars before that used the speaker grills for mounting LEDs, but the Max's front speakers are in the doors, not on the dash.
Any suggestions?
Does anyone have any ideas as to the best power source and location for the warning LED? I don't want to drill a hole somewhere where it'll do irreparable damage to the dash. I'll need to be able to get to the LED wiring from behind, so it has to be fairly accessible, as well.
I've had cars before that used the speaker grills for mounting LEDs, but the Max's front speakers are in the doors, not on the dash.
Any suggestions?
#3
yup thats where mine is, right next to the dimmer
also if ur other question was which wires are hot, just turn ur keys to the acc position and grab a volt meter and goto work finding one.
cant remember which ones are hot tho... sorry
also if ur other question was which wires are hot, just turn ur keys to the acc position and grab a volt meter and goto work finding one.
cant remember which ones are hot tho... sorry
Thread
Thread Starter
Forum
Replies
Last Post
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM