Terribly unexciting: Another Maxima with a full Stillen body kit w/tinted tails
Originally Posted by SXN
i know this might be a bad question...but dont you guys have garages out there?
I really can't wash it because it will become entombed in ice since the highs in the daytime are only around 5-12 degrees. Dave
Originally Posted by Jepht20
btw, howcome you decided to change the tinted redded out tails you had before? and why do you say nite shades is crap? i used it on a pair of bumper lights for a few friends and it's been fine.
The reason I don't like Nite Shadz is because it seems to look really flat and it's not near as translucent as the Japanese tailight paint.
Dave
Originally Posted by Dave B
Yeah, I have a garage, but I have to drive my car so I can get around therefore it gets dirty
I really can't wash it because it will become entombed in ice since the highs in the daytime are only around 5-12 degrees.
I really can't wash it because it will become entombed in ice since the highs in the daytime are only around 5-12 degrees.
it just seems to be a running theme that the more east you go, the less garages there are. my buddy in rhode island (ReDMaX99SEL) had 3 maxes are once, doing work on all of them, no garage
Originally Posted by Dave B
Yeah, I have a garage, but I have to drive my car so I can get around therefore it gets dirty
I really can't wash it because it will become entombed in ice since the highs in the daytime are only around 5-12 degrees.
Dave
I really can't wash it because it will become entombed in ice since the highs in the daytime are only around 5-12 degrees. Dave
Dave, car is nice and im gonna try to do what u did with the taillights. I was so desperate i was thinking of buying LED G2 light for the 97-99 and only using the outer light while deep tinting the inner. You have given me hope for a cheaper and better alternative. However, you need some different rims, something more out, maybe even chrome.
Originally Posted by Certified Beast
However, you need some different rims, something more out, maybe even chrome.
Dave
Originally Posted by Maxima Mike
Hey would deep green pass off as black? You can hardly see the green on mine.
Originally Posted by Dave B
Here are some pics of the tails. The picture was taken at 800am which is the brightest part of the day. I cleaned off the salt best I could:




Ouch, those dont look like they have enough paint to give that "black out" look. Did you try maybe giving them one more layer so you cant see and red? Or did you personally do them that way by choice?
Either way, its different...like my tails. And its nice seeing more people do different and unique mods to their taillights...
Eric
Originally Posted by Dave B
I had the tails smoked then went to the redded out ambers with smoked reverse lights, but after about 6 months I decided the ambers looked better smoked on my black car.
The reason I don't like Nite Shadz is because it seems to look really flat and it's not near as translucent as the Japanese tailight paint.
Dave
The reason I don't like Nite Shadz is because it seems to look really flat and it's not near as translucent as the Japanese tailight paint.
Dave
If I applied this stuff, then applied a layer or two of clearcoat, would that hinder my abilty to remove the paint and stuff?
BTW, you should get your old blacked out clear corners back in...those are awesome on your car. And like you said, you should do the AE headlight mod. I'm looking around to see how I can do it with the Cefiro headlights...
http://images.cardomain.com/member_i...29_49_full.jpg
as of now my lights are fully blacked out, also my spoiler is that pic is from the summer gotta take new 1's
parting out stuff BTW http://forums.maxima.org/showthread.php?t=281474
thanks guys...
as of now my lights are fully blacked out, also my spoiler is that pic is from the summer gotta take new 1's
parting out stuff BTW http://forums.maxima.org/showthread.php?t=281474
thanks guys...
Originally Posted by 99Maxima5sp
Ouch, those dont look like they have enough paint to give that "black out" look. Did you try maybe giving them one more layer so you cant see and red? Or did you personally do them that way by choice?

Believe me, they're plenty dark.
Dave
Originally Posted by mchne
looks great. way to represent the 95/96 look and not convert the front and rear end to 97+ like so many people are doing.
LEMAR
Originally Posted by 95maxrider
So you still have the orange in the tails? Or is it redded out?
If I applied this stuff, then applied a layer or two of clearcoat, would that hinder my abilty to remove the paint and stuff?
If I applied this stuff, then applied a layer or two of clearcoat, would that hinder my abilty to remove the paint and stuff?
Originally Posted by kingrukus
Where do you get your information from?
He doesn't.
He doesn't.
Originally Posted by Dave B
The reason they look a little flat (they're not near as flat in person) is because there is translucent red paint under smoke paint from when I had the ambers tinted red.
he used reded out stock tails, as said above
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
14
Nov 7, 2024 07:31 PM
Team STILLEN
Autocrossing and Road Course Racing
0
Aug 10, 2015 04:29 PM
MikesChevelle
5th Generation Maxima (2000-2003)
4
Aug 6, 2015 11:36 AM





