programming new key fob
#1
programming new key fob
Well I managed to lose my second key fob....
I bought two of them of ebay this week but neither mention coming with programming instructions... as some auctions did.
Does anyone have these instructions?
I got a great deal on a new and like new fob for a good price. I just need to program them when they arrive.
I bought two of them of ebay this week but neither mention coming with programming instructions... as some auctions did.
Does anyone have these instructions?
I got a great deal on a new and like new fob for a good price. I just need to program them when they arrive.
#2
you will have to insert and remove the key for the car several times untill the hazards flash. Do this insert and remove quickly. If i remember properly all you'll have to do next is hit the doorlock button on your remote.
That should take care of it.
That should take care of it.
#3
Go In Car,
1) Lock Doors From Inside Power Locks
2) Put Key In And Out Ignition More Than 6 Times Within 10 Seconds
3)your Hazards Will Flash
4)turn Key To "acc"
5) Press Lock Button On Remote. You Are Done!
6) To Program Another Remote Unlock Driver Door, Then Lock, Then Press Lock Button On Remote.
Done!
1) Lock Doors From Inside Power Locks
2) Put Key In And Out Ignition More Than 6 Times Within 10 Seconds
3)your Hazards Will Flash
4)turn Key To "acc"
5) Press Lock Button On Remote. You Are Done!
6) To Program Another Remote Unlock Driver Door, Then Lock, Then Press Lock Button On Remote.
Done!
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
Omar Abdurrahman Siddiqi
5th Generation Maxima (2000-2003)
33
08-26-2016 05:18 PM
QueensMAX
5th Generation Maxima (2000-2003)
7
09-15-2015 04:14 AM