What up org. havent quite been around much... i drive to much now.

Ok my spoiler light doesnt work and hasnt since i painted it.
I cut the wires before i saw that connector which light=wire connects.
So i cut the spoiler light free. then saw the connector and cut that off for some dumb reason.. dont ask.

So when i when to put it back together i lost that connector and hard-wired the 2 wires up. But Nothing. I switched the +/- around n stuff but nothin still.


*I did put the light wires +/- on the battery and still no light. no work. nada.

Q: Was there a resistor in that Connector?
Q: Is the light fried?
Q: Should i use a test light on the lose wires hanging in the trunk to see if it gets power.. if you say yes does a 40 w reg. bulb work orrrr... what does?


Anyways.Thanks for any help in advance. Much App Mwest.

 

...are you pressing the brake when you are testing? i know its a dumb question but i had to ask... id say use a multimeter to test the wires and see if you are getting voltage, if not you could have blown a fuse somewhere

or your light might be bad...

 

I had the same problem Check ur fuse. Currently mine is hard wired and it works the connector caught on fire for some reason.

 

ha... yes im havin someone press on the brake when i test it.

I dont know where the single fuse for that is>..? Wouldnt it make the rear lights not work as well if thats the case or does it have a private fuse..?

thanks for any help.. mwest..