4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Fog Lights

Thread Tools
 
Search this Thread
 
Old 12-22-2004 | 12:27 AM
  #1  
kashman15's Avatar
Thread Starter
Member
 
Joined: Sep 2004
Posts: 157
Fog Lights

Is there a link or a write up that anyone can give to on how to replace the bulbs on the foglights?
Old 12-22-2004 | 01:37 AM
  #2  
Batxel's Avatar
blah
iTrader: (1)
 
Joined: May 2004
Posts: 1,616
From: Philadelphia, PA
Im not sure about this since its been a long time. I think you pop a little plastic piece on the inner sides of the foglights and you will find two screws behind there. Remove the two screws and fog lamp will come out and the rest is cake.
Old 12-22-2004 | 01:43 AM
  #3  
ScarfaceTHX's Avatar
Senior Member
 
Joined: Mar 2004
Posts: 494
Yeah that about covers it. Rip that little black plastic piece off the insides of the fogs. It is just there to hide the mounting bracket / screw. I wondered how to change them myself, then kicked myself in the *** when I found out how easy it was.
Old 12-22-2004 | 12:49 PM
  #4  
kashman15's Avatar
Thread Starter
Member
 
Joined: Sep 2004
Posts: 157
and then do i twist and pull just like the headlights come out or do i have to pull them out differently?

sorry for the noob questions but i havent had time to see what you guys are talking about.
Old 12-22-2004 | 01:08 PM
  #5  
ScarfaceTHX's Avatar
Senior Member
 
Joined: Mar 2004
Posts: 494
Oh, there is a thing holding them in on the far sides of the foglights. Just pull towards the center of the car with the foglight.
Old 12-22-2004 | 01:20 PM
  #6  
NookieMax's Avatar
Donating Maxima.org Member
 
Joined: Jun 2003
Posts: 384
theres a ball 'n socket joint on the opposite side of the houseing as the screws, just pull towards the center and out, you'll understand once you get the first one done
Old 12-22-2004 | 01:43 PM
  #7  
Conrad283's Avatar
I need a truck
iTrader: (2)
 
Joined: Feb 2002
Posts: 73,118
From: Naples, Fl
2nd post says it all. Good luck
Old 12-22-2004 | 01:50 PM
  #8  
Irish's Avatar
This is a democracy
iTrader: (3)
 
Joined: Jun 2003
Posts: 1,478
dont just rip the inner black piece off, there are plastic screws holding it in, rip it out and theres the chance to break that, its just like the plastic screws holding down different interior trim pieces. very simple thing to do
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
09-02-2021 12:03 PM
fastcarny
5th Generation Maxima (2000-2003)
2
10-06-2015 11:42 AM
Maxie40
General Maxima Discussion
1
09-14-2015 12:28 PM
-ReLLiK-
4th Generation Classifieds (1995-1999)
0
09-08-2015 01:02 PM
Maxima30
5th Generation Maxima (2000-2003)
2
09-07-2015 07:13 PM



Quick Reply: Fog Lights



All times are GMT -7. The time now is 10:44 AM.