Technosquare ECU revs up to 7100 :)
#42
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Originally Posted by Irishmax99
can you do this mod with out MEVI? on stock US IM?
#43
#44
Don't the A/F and timing changes only make a difference at partial throttle? So if you floor your car now, it's not going to go any faster than it did before? Is that true or am I wrong? I hope I'm wrong because what would the point be then....
#45
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Originally Posted by VQuick
Don't the A/F and timing changes only make a difference at partial throttle? So if you floor your car now, it's not going to go any faster than it did before? Is that true or am I wrong? I hope I'm wrong because what would the point be then....
#46
Guest
Posts: n/a
So the secret is out. I heard from one of the local guys that this has been done for a while, and he got a different rev limit. Also, you guys are overpaying.
#47
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Originally Posted by $tillenmax2k
So the secret is out. I heard from one of the local guys that this has been done for a while, and he got a different rev limit. Also, you guys are overpaying.
I also didn't see anyone step up to the plate when we were wanting a raised limit out for 4th Gens and I personally asked Danny (at the time) to start this project back in 2003. I sent them my ECU and they went to work.
As far as over paying goes, you believe what you want.
#49
Originally Posted by deezo
A while is about 3 months like I said and no one had it before that point from TS. How do I know? Because I've been working with them for the past year on it. It really was no secret that this was happening because I've told people what I was doing. Do a search.
I also didn't see anyone step up to the plate when we were wanting a raised limit out for 4th Gens and I personally asked Danny (at the time) to start this project back in 2003. I sent them my ECU and they went to work.
As far as over paying goes, you believe what you want.
I also didn't see anyone step up to the plate when we were wanting a raised limit out for 4th Gens and I personally asked Danny (at the time) to start this project back in 2003. I sent them my ECU and they went to work.
As far as over paying goes, you believe what you want.
And I know for sure that the ECU can be had for less, as my friend has bought 3 of them for less than the $410 mentioned above. But that was probably because we just drive down there personally. Even more rediculous is what they charge to do the 5th gen ECU upgrades, which don't require soldering in new hardware, or even opening the case.
In any case, the higher rev limiter now makes the 4th gens equal to the DE-K's., so it will be interesting to see what the future holds.
#53
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Originally Posted by Larrio
There were other 4th gen people working with TechnoSquare that maybe you weren't aware of or told about. When Danny left, he took a lot of info with him, and some guys at TS were clueless about certain issues. Brian didn't even know how to remove a maxima ECU when he first worked on my car after Danny left.
And I know for sure that the ECU can be had for less, as my friend has bought 3 of them for less than the $410 mentioned above. But that was probably because we just drive down there personally. Even more rediculous is what they charge to do the 5th gen ECU upgrades, which don't require soldering in new hardware, or even opening the case.
In any case, the higher rev limiter now makes the 4th gens equal to the DE-K's., so it will be interesting to see what the future holds.
And I know for sure that the ECU can be had for less, as my friend has bought 3 of them for less than the $410 mentioned above. But that was probably because we just drive down there personally. Even more rediculous is what they charge to do the 5th gen ECU upgrades, which don't require soldering in new hardware, or even opening the case.
In any case, the higher rev limiter now makes the 4th gens equal to the DE-K's., so it will be interesting to see what the future holds.
The price is really up to what TS wants to charge the individual. We can't say you can get it for cheaper if TS doesn't agree to it.
Guys, the price for the ECU upgrade is $380 but I wanted it next day so I paid $30 for next day service. My bad if anyone misunderstood me.
#54
Well what price SHOULD we be paying? ie.. if we call them and ask for a price.
Originally Posted by $tillenmax2k
So the secret is out. I heard from one of the local guys that this has been done for a while, and he got a different rev limit. Also, you guys are overpaying.
#56
Originally Posted by Larrio
Well, I just meant in the sense that it will be like my 3.0 with VI and TS ECU with higher rev limit.
4th gen with DE-K IM and ECU is a N/A beast.
#57
God I wish the VQ30DE engine was soo played out like the Hondas/Acuras so we'd get ECU upgrades for only $200
#58
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Originally Posted by VQuick
Don't the A/F and timing changes only make a difference at partial throttle? So if you floor your car now, it's not going to go any faster than it did before? Is that true or am I wrong? I hope I'm wrong because what would the point be then....
You have it backwards.
#59
Hey deezo,
What is this?
http://www.jimwolftechnology.com/cus...asp?PartID=388
What is this?
http://www.jimwolftechnology.com/cus...asp?PartID=388
Originally Posted by deezo
Yeah. The tranny computer will have to modded to support shifting at 7100.
#60
Also, what about one of these deezo:
http://www.levelten.com/store/import...shiftronic.htm
http://www.rcreations.com/public/CoD...html#manumatic
http://www.levelten.com/store/import...shiftronic.htm
http://www.rcreations.com/public/CoD...html#manumatic
#64
Someone refresh my mind please. I read something about it but it was a long time ago. What would happen if I put the 96 auto ecu in my 96 5spd? I know that apparently the ECU blips the throttle during shifts but what else? Will I get codes as well? I'm only asking cause if TS doesn't have the 5spd rev limit cracked yet, I'm willing to send my auto ecu if no big problems would arise from me using it.
#67
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Originally Posted by DAVE Sz
I remember Mike's problem but again I remember that there weren't that many problems with the auto ECU in a manual car. I dunno, I might as well just swap the ECUs just to check it out.
you will get a half dozen codes but the car will run just fine.
#69
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Originally Posted by DAVE Sz
Thanks Steve and Mike. BTW, Mike, I'll get that rail out for you tomorrow, today actually, or monday so I can get it to you next week.
I could come get it tomorrow or Monday if you want
#71
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Whoever is going to get this mod will be very happy. I can't believe how much power this car recovers with the ECU. Anyone have a dyno comparision of the TS or JWT ECU against stock with the VI?
#74
Originally Posted by deezo
Whoever is going to get this mod will be very happy. I can't believe how much power this car recovers with the ECU. Anyone have a dyno comparision of the TS or JWT ECU against stock with the VI?
#76
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
The impresive part of what Requin6 posted is where you will be in the power band (for a 5spd at least). Look at the two curves, w/o the JWT ECU from 4.5k-6.5K and w/ the JWT ECU from 5K-7K. The average HP for the JWT ECU in that range is 188.43 and the stock ECU is 178.59.
#78
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Originally Posted by Rowan
would the curves look different if those runs were done without the MEVI? Specifically the difference in HP/TQ at every RPM. (I realize that the peak total will be lower with stock intake manifold).
#79
Supporting Maxima.org Member
iTrader: (3)
Join Date: Oct 2002
Location: Ontario, Canada
Posts: 1,204
Originally Posted by Rowan
would the curves look different if those runs were done without the MEVI? Specifically the difference in HP/TQ at every RPM. (I realize that the peak total will be lower with stock intake manifold).
Timing on this ecu was further advanced from the standard TS unit. I have no idea what timing Deezo would have ended up with.
#80
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
Thanks for posting the dynos guys. I've been looking for a good data logger for my laptop (don't care for the Palm) so I can see what my engine is doing now. My coworker (a SpecV guy) things I should really get some dyno time. I'd rather run to the track though.