4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Fog light Pre-wiring

Old May 19, 2001 | 09:03 PM
  #1  
gtr_rider's Avatar
Thread Starter
192.168.1.1
iTrader: (50)
 
Joined: Dec 2000
Posts: 17,617
From: Ft. Lauderdale, FL
I have looked numerous times, for the pre-wiring for the fog lights, aren't they supposed to be tapped onto the back of the headlight assembly. can someone somehow take a picture of the wire that i should look for.
Old May 20, 2001 | 08:23 AM
  #2  
Sonic's Avatar
Senior Member
 
Joined: Dec 2000
Posts: 8,765
From: Westchester County, NY
What trim level do you have. If you don't have at least the GXE WITH C&C (you do if you have a power drivers seat) then you don't have the prewiring. The wiring is actually alot easier to see from the bottom of the car, BTW. Undo one of the underbody protectors and look up towards the headlights. They are about 3 feet long and taped up there with gray tape.
Old May 20, 2001 | 08:37 AM
  #3  
96MAXIMAGXE's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: May 2001
Posts: 724
i actually found my wires when i was putting in my clear corners they were taped to the wires that go to the sidemarker and turn signal.
Old May 22, 2001 | 09:17 AM
  #4  
nelzavala's Avatar
Senior Member
 
Joined: Dec 2000
Posts: 138
fog light wiring

follow the wires that branch out from the headlight harness there should be about three, one should be your fog light harness.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
Sep 2, 2021 11:03 AM
fastcarny
5th Generation Maxima (2000-2003)
2
Oct 6, 2015 10:42 AM
Maxie40
General Maxima Discussion
1
Sep 14, 2015 11:28 AM
-ReLLiK-
4th Generation Classifieds (1995-1999)
0
Sep 8, 2015 12:02 PM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 02:29 PM.