carbon fiber door pillar inlays?
07-07-2005, 07:30 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Posts: 137
carbon fiber door pillar inlays?
Anybody know of any company who makes carbon fiber door pillar inlays for the 4th gen maxima, or any kind of replacement except chrome? Im not really feelin' the body color door pillar mod i did on my max anymore it looks kind of weird with the pearl white. i wish i never did it now, that mod look good on some colors but i think white isn't one of them, at least in my eyes. Thanks everbody for your feedback and .02 cents. 
07-07-2005, 08:08 PM
#3
07-07-2005, 08:51 PM
#6
Originally Posted by JPMax
Flavor,
How much was the whole set? They don't have a price on that webpage.
Also, how are they installed?
How much was the whole set? They don't have a price on that webpage.
Also, how are they installed?
I believe they were like 65.00.
Their held on with Epoxy. Their actual molded Carbon Fiber pieces, similiar to hoods and etc.
07-08-2005, 05:12 AM
#8
Chipotle,
Yes the pillars between the front and back doors are body color underneath the black vinyl nissan puts on. All you need is a hair dryer to soften up the vinyl, a razor blade to cut the vinyl at the top and bottom, and lots of patience to pull it off in one big piece.
Haven't had a close look at the little pillar in the middle of the rear window yet though.
Yes the pillars between the front and back doors are body color underneath the black vinyl nissan puts on. All you need is a hair dryer to soften up the vinyl, a razor blade to cut the vinyl at the top and bottom, and lots of patience to pull it off in one big piece.
Haven't had a close look at the little pillar in the middle of the rear window yet though.
07-08-2005, 06:23 PM
#11
Originally Posted by JPMax
Chipotle,
Yes the pillars between the front and back doors are body color underneath the black vinyl nissan puts on. All you need is a hair dryer to soften up the vinyl, a razor blade to cut the vinyl at the top and bottom, and lots of patience to pull it off in one big piece.
Haven't had a close look at the little pillar in the middle of the rear window yet though.
Yes the pillars between the front and back doors are body color underneath the black vinyl nissan puts on. All you need is a hair dryer to soften up the vinyl, a razor blade to cut the vinyl at the top and bottom, and lots of patience to pull it off in one big piece.
Haven't had a close look at the little pillar in the middle of the rear window yet though.
07-08-2005, 07:16 PM
#12
Originally Posted by Chipotle18
soo..does the pillar in the middle of the rear window have body color underneath vinyl?!
No it doesnt.
The only reason the fronts have the body color underneath is that is part of the actual door and painted at the time of the door, then covered in vinyl later.
The back window piece is simply an insert that seperates the glass.
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
5
08-15-2024 12:30 AM
magiconthetire
Audio and Electronics
2
10-26-2015 09:03 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM