4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Key fob programming

Thread Tools
 
Search this Thread
 
Old 12-07-2005, 10:59 AM
  #1  
Member
Thread Starter
 
venturous's Avatar
 
Join Date: Nov 2005
Location: Johnson City, TN
Posts: 240
Key fob programming

Do any of you know where I can find the programming for a 96 Maxima (preferably for free)? I found one thru a search that is for a 97 to 99 and it did not work on my 96. I have seen mention of the 93 to 96 series key fobs, but not the programming. The fobs are being sold as 95 to 98 series being the same, but are the cars different?
Guys, I appreciate your response.
venturous is offline  
Old 12-07-2005, 11:06 AM
  #2  
oem ftw!
iTrader: (21)
 
CRiME's Avatar
 
Join Date: Nov 2005
Posts: 1,458
The info is in the FAQ, post #39. I just used that exact procedure to program a 1997 infiniti i30 remote to work with my 95 GLE, worked great. Hope this works for you...

http://forums.maxima.org/showthread....7&page=2&pp=30
CRiME is offline  
Old 12-07-2005, 11:23 AM
  #3  
Do I get a tax break?
iTrader: (4)
 
njmodi's Avatar
 
Join Date: Jul 2001
Location: Elmhurst, IL
Posts: 5,441
Originally Posted by venturous
Do any of you know where I can find the programming for a 96 Maxima (preferably for free)? I found one thru a search that is for a 97 to 99 and it did not work on my 96. I have seen mention of the 93 to 96 series key fobs, but not the programming. The fobs are being sold as 95 to 98 series being the same, but are the cars different?
Guys, I appreciate your response.
Assuming you know you have keyless entry/alarm - blinking security light means you do, the instructions posted by kb will work, and any remote from 95-98 will work
njmodi is offline  
Old 12-07-2005, 11:25 AM
  #4  
192.168.1.1
iTrader: (50)
 
gtr_rider's Avatar
 
Join Date: Dec 2000
Location: Ft. Lauderdale, FL
Posts: 17,637
http://www.vqpower.com/v2/modules.ph...s=MaxFaQ%27s#1
gtr_rider is offline  
Old 12-07-2005, 11:49 AM
  #5  
oem ftw!
iTrader: (21)
 
CRiME's Avatar
 
Join Date: Nov 2005
Posts: 1,458
The instructions on the vqpower page recommend you insert the key 6 times, but I should let you know I needed to insert / remove mine about 10 times before the hazards flashed. Just keep inserting / removing until you get the blink. Hope this helps
CRiME is offline  
Old 12-07-2005, 09:22 PM
  #6  
Member
Thread Starter
 
venturous's Avatar
 
Join Date: Nov 2005
Location: Johnson City, TN
Posts: 240
Thanks guys, I bought the car from a lady I work with and it had two key fobs. She had the car for about eight years. She said one fob quit working years ago and one quit more recently. One had a dead battery and one was ok. I replaced the dead battery and still neither one works. I found a procedure like the one noted that said it was for a 97 to 99 and tried it. I never did get the flashers to blink, but tomorrow, as suggested, I will try more cycles with the key than six in ten seconds and see if that works.
I just won another keyfob off ebay that is supposed to be good, so we will see how that works when I get it.
Again, thanks for the reply and if there are anymore suggestions, they are appreciated.
Randy
venturous is offline  
Old 12-08-2005, 03:27 AM
  #7  
Senior Member
iTrader: (16)
 
aussie983's Avatar
 
Join Date: Dec 2003
Location: SF bay area
Posts: 1,341
Originally Posted by venturous
Thanks guys, I bought the car from a lady I work with and it had two key fobs. She had the car for about eight years. She said one fob quit working years ago and one quit more recently. One had a dead battery and one was ok. I replaced the dead battery and still neither one works. I found a procedure like the one noted that said it was for a 97 to 99 and tried it. I never did get the flashers to blink, but tomorrow, as suggested, I will try more cycles with the key than six in ten seconds and see if that works.
I just won another keyfob off ebay that is supposed to be good, so we will see how that works when I get it.
Again, thanks for the reply and if there are anymore suggestions, they are appreciated.
Randy
Just pointing out this is easy to overlook, but you must have all doors closed for it to flash. I tried this several times, before i realized one of my rear doors wasnt fully closed.
aussie983 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
Fbana41
Maximas for Sale / Wanted
3
08-29-2016 12:18 PM
Omar Abdurrahman Siddiqi
5th Generation Maxima (2000-2003)
33
08-26-2016 05:18 PM
maxinout93
Infiniti I30/I35
4
10-16-2015 02:53 AM
QueensMAX
5th Generation Maxima (2000-2003)
7
09-15-2015 04:14 AM



Quick Reply: Key fob programming



All times are GMT -7. The time now is 01:22 AM.