LED Interior Progress
#41
Originally Posted by mendon99
its the same thing thing. they're just MUCH smaller, like twice the size of a pinhead, and square. the output is far superior to that of a regular led however, and it spreads light like a ****. did you see Metal Maxima's LED gauge thread? i think its in members rides. take a look.
mine was done with 3mm leds, 5000mcd.. one LED per button, 4 for the fan speed **** though.
mine was done with 3mm leds, 5000mcd.. one LED per button, 4 for the fan speed **** though.
#42
sorry for the newb questions but does it matter what viewing angle the led is at? the electronics store sells leds by my house here's the spec can you tell me if this will work. thanks again. 40deg viewing angle will it give me hotspot?
3mm WHITE SB 3000mcd 3V 20ma 40deg
3mm WHITE SB 3000mcd 3V 20ma 40deg
#43
Originally Posted by zarek66
sorry for the newb questions but does it matter what viewing angle the led is at? the electronics store sells leds by my house here's the spec can you tell me if this will work. thanks again. 40deg viewing angle will it give me hotspot?
3mm WHITE SB 3000mcd 3V 20ma 40deg
3mm WHITE SB 3000mcd 3V 20ma 40deg
#44
Originally Posted by 2 MaXiMuS 4
hmm, maybe ill will try that. Which website carried them? was it lumileds.com or something like that?
#46
Originally Posted by zarek66
yeah but willl 3000 mcd give me the desire effect? also anyone got pics of blue led instead of white. thanks
#47
Originally Posted by 2 MaXiMuS 4
(that reason and that 3 of the 4 led's I had in there originally burned out).
#48
Originally Posted by mendon99
thay may continue to happen, might need to add diodes and a regulator so they won't prematurely die. i did my gf's 99 with auto climate control, and they all burned out one by one.
How long did they last on your gf's cc?
#49
few weeks. and if you dont add a diode to certain leds (they really arent confirmed in any write up), they will die out. the ones that dont die out, had diodes built into the circuit board. just wait a bit and see if they die.. LEDs barely ever are just duds, and they last wayyy longer than standard bulbs.
#50
Originally Posted by 2 MaXiMuS 4
As for the cluster illumination, I used Polarg 194 bulbs.
#53
Originally Posted by VQuick
Bumping this up. So you're using incandescent bulbs for the main gauge cluster illumination? And yet you still have hotspots?
#54
Originally Posted by shissqbob
i'll give you props for those needles. those look sick. haha just don't touch the positive to negative because you may not just blow a fuse, like in my case...
#57
Originally Posted by 2 MaXiMuS 4
yes, i used polargs. The reason for the hotspots is the way the light is dispersed under the guages, via clear plastic pieces. Where the gauges are brightest are where the bulbs are located.
#58
Originally Posted by VQuick
I guess I'm wondering why the Polarg bulbs give hotspots but not the stock bulbs. My '99 gauges are stock and there are not discernible hotspots. So I'm guessing it's because you converted from the stock 74 bulbs to 194 size bulbs and the light dispersion is different.
#59
in reguards only to the climate control. What LED were used when this picture was taken
And then what LED were used in these. size, brightness and all that good stuff.
I love the way that looks, i'm assuming its like a 10k MCD and 3mm and how were they wired, just a simple splice in the harness?
And then what LED were used in these. size, brightness and all that good stuff.
I love the way that looks, i'm assuming its like a 10k MCD and 3mm and how were they wired, just a simple splice in the harness?
#60
the bulbs in the first pic are just the oem filament bulbs...in the 2nd pic, you are correct, they are 10k MCD 3mm led bulbs. I got a little creative and installed the led's and resistors into the original bulb holders.
#61
wow, my OEM one doesn't look that dull at all compared to yours. its just my left 2 bulbs are out the one for AUTO button and stuff and the recircluation.
I'm just gonna splice like the how-to did, red cellopane sheet right to get display white?
I'm just gonna splice like the how-to did, red cellopane sheet right to get display white?
#62
I hate to resurrect such an old post but should I assume the door switches are also 3mm?
Also, has anyone used these for their gauge cluster as they're a twist-on like the stock bulbs? http://www.superbrightleds.com/cgi-b...s%2F74_t15.htm
Thanks
Jay
Also, has anyone used these for their gauge cluster as they're a twist-on like the stock bulbs? http://www.superbrightleds.com/cgi-b...s%2F74_t15.htm
Thanks
Jay
Last edited by Jay72; 04-21-2010 at 06:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto 97 SE BLACK w/ BLACK. PART OUT.
worldwiderecognized
4th Generation Classifieds (1995-1999)
2
09-24-2015 06:56 PM