I fixed my cruise control...Thanks Daniel B!!
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2001
Location: North Aurora, IL
Posts: 2,844
I just got my new ACT clutch installed and was on the highway for a brief while the other day, and my cruise control wouldn't engage. Today I got out my trusty maglite and went searching for the problem. The fuse was fine, so I went to the next most logical thing that could have changed. The ASCD clutch switch. Well after shining my light on it I realized that the little button wasn't being pushed in all the way when the clutch was engaged. The pedal up position for the clutch must have changed. Sure enough the maglite showed the problem. The switch wasn't being pressed all the way in. So I loosened it and adjusted it to be flush with the pedal. Then tightened it up, and off I went....cruise control fully functional!
THANKS DANIEL B!!!
THANKS DANIEL B!!!
#2
Originally posted by BriGuyMax
... The ASCD clutch switch. ... So I loosened it and adjusted it to be flush with the pedal. Then tightened it up, and off I went....cruise control fully functional!
THANKS DANIEL B!!!
... The ASCD clutch switch. ... So I loosened it and adjusted it to be flush with the pedal. Then tightened it up, and off I went....cruise control fully functional!
THANKS DANIEL B!!!
Thread
Thread Starter
Forum
Replies
Last Post