help no power getting to starter
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2001
Location: Madisonville ky
Posts: 1,333
help no power getting to starter could it be factory alarm related
my ignition is getting power but im not getting power to the starter, does anyone have a wire diagram to where the wires run from the ignition to the starter? I can use a jumper wire and start the car that way but when i use a test light it im not getting power. I pulled the factory alarm fuse cause my key fob wont stop the alrarm form beeping. could the alarm disable the starter? thanks
Brandon
Brandon
#2
Member who somehow became The President of The SE-L Club
iTrader: (19)
Join Date: Jun 2001
Posts: 16,033
Most likely it's the ignition switch, a common failure item in our cars.
Check all the fuses and make sure you don't have a relay gone bad.
For $15 bucks the Haynes shop manual has complete wiring diagrams to help you troubleshoot.
Check all the fuses and make sure you don't have a relay gone bad.
For $15 bucks the Haynes shop manual has complete wiring diagrams to help you troubleshoot.
Thread
Thread Starter
Forum
Replies
Last Post
maxima297
4th Generation Maxima (1995-1999)
4
09-30-2015 03:32 PM