4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

soo uhh...where can i get a cheap front bumper?

Old May 18, 2007 | 11:16 AM
  #1  
willard00's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Nov 2005
Posts: 1,238
soo uhh...where can i get a cheap front bumper?

some old lady 2 cars infront of me just stopped short in the rain, car infront of me barely was able to stop. i unfortionatly couldnt stop in time and now have a nice square trailer hitch mark indented about 1/4 inch into my bumper. luckily no damage to the other car though. so long story short, i need a bumper. wheres a good/cheap place to get one for a 99? i can do the painting myself so it doesnt matter if it comes primed or painted.
Old May 18, 2007 | 11:26 AM
  #2  
maxima985spd
Guest
 
Posts: n/a
eGayyyyy.com
Old May 18, 2007 | 11:34 AM
  #3  
loverholic's Avatar
iAMIXAM!
iTrader: (3)
 
Joined: Aug 2005
Posts: 1,478
From: Houston TX
theres a place in houston called autofit.bz, they have this hug a$$ warehouse full of replacement parts and they have them for 50 bucks..... you can check their website and see if they have a warehouse closer to you and you can call them up and ask them how much would it be to ship it to you....
Old May 18, 2007 | 11:58 AM
  #4  
hectorc's Avatar
Upper Midwest Wheel Whore
iTrader: (4)
 
Joined: Nov 2003
Posts: 2,398
From: Chicago IL
I woulkd seriously suggest going OEM. in other words look to the dealership to get a replacement. It may be alil more pricey, but the fitment will be better than ebay replicas. I have seen a couple of OEM replicas and the gap between the turn signals is very noticeacble.
Old May 18, 2007 | 12:02 PM
  #5  
willard00's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Nov 2005
Posts: 1,238
honestly, it doesnt matter much to me. ide rather spend less and have a little bit bigger of a gap. i checked the autofit.bz site and couldnt seem to find any bumpers. i found some other site that has them for $100 shipped. might go that route. might just leave it for now until i get some more free money. havnt decided what route im going to take yet.
Old May 18, 2007 | 12:26 PM
  #6  
96DentKING's Avatar
Member
 
Joined: May 2007
Posts: 53
From: Cranston, Rhode Island
Damn old ladies....same thing happened to me and I've been living with the screwed up front bumper for awhile now. Well, the good part was the old lady that caused my accident got her passenger door pwned by my bumper. I'm a little hesitant to buy an OEM replacement on ebay due to poor quality... I feel for ya man.
Old May 18, 2007 | 12:38 PM
  #7  
loverholic's Avatar
iAMIXAM!
iTrader: (3)
 
Joined: Aug 2005
Posts: 1,478
From: Houston TX
Originally Posted by willard00
honestly, it doesnt matter much to me. ide rather spend less and have a little bit bigger of a gap. i checked the autofit.bz site and couldnt seem to find any bumpers. i found some other site that has them for $100 shipped. might go that route. might just leave it for now until i get some more free money. havnt decided what route im going to take yet.
i know its not on their website but its in the warehouse... i went and checked on it couple weeks ago, thats why i said you should call.....

if you're gonna buy it for a $100, you might as well go with the ebay ones... they are like $10-$25 less, depending on what vendor you get it from....
you can PM ethnic6 to find out about it, i think he got one from ebay.....
heres the thread: http://forums.maxima.org/showthread....t=bumper+cover
Old May 18, 2007 | 12:42 PM
  #8  
ManualMaxima's Avatar
5th Gen till she dies!
iTrader: (10)
 
Joined: May 2003
Posts: 4,544
i have an ebay replica and it is 100% perfect fitting......not you never know i have seen some ****ty ones to in my time
Old May 18, 2007 | 12:54 PM
  #9  
bhunter's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Aug 2004
Posts: 1,036
I just bought a new one from Keystone, an aftermarket parts supplier. They had a store 20 miles from me and had it in stock. Fit perfectly and cost me $118 with tax. My insurance person told me about them.
Old May 18, 2007 | 02:20 PM
  #10  
willard00's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Nov 2005
Posts: 1,238
Originally Posted by bhunter
I just bought a new one from Keystone, an aftermarket parts supplier. They had a store 20 miles from me and had it in stock. Fit perfectly and cost me $118 with tax. My insurance person told me about them.
painted or not?
Old May 18, 2007 | 04:37 PM
  #11  
one_mil_2010's Avatar
Member
iTrader: (10)
 
Joined: Mar 2005
Posts: 167
From: Alameda,CA
Listen if you are near Boston go to Certifit Auto Parts (certifit.com) a bumper for 97-99 maxima is ridiculously cheap - $28.75 to be exact. They aren't the best fitting but hey for that kind of price you can't ask too much of them. They also ship if you don't have one near by.
Old May 18, 2007 | 05:37 PM
  #12  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
i'd go ebay. if you know what your doing you can minimize the gap that might be there.

when in doubt, put a lip on it, who will be able to tell then
Old May 18, 2007 | 09:45 PM
  #13  
vuiskool's Avatar
Senior Member
iTrader: (1)
 
Joined: May 2007
Posts: 260
Originally Posted by one_mil_2010
Listen if you are near Boston go to Certifit Auto Parts (certifit.com) a bumper for 97-99 maxima is ridiculously cheap - $28.75 to be exact. They aren't the best fitting but hey for that kind of price you can't ask too much of them. They also ship if you don't have one near by.
That price is like buying 5 fenders for my infiniti g20. Lol
Old May 19, 2007 | 06:54 AM
  #14  
willard00's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Nov 2005
Posts: 1,238
Originally Posted by one_mil_2010
Listen if you are near Boston go to Certifit Auto Parts (certifit.com) a bumper for 97-99 maxima is ridiculously cheap - $28.75 to be exact. They aren't the best fitting but hey for that kind of price you can't ask too much of them. They also ship if you don't have one near by.
haha, not a bad pricetag at all. im about 20 mins from boston so ill deffinatly look into it.
Old Jul 27, 2007 | 10:17 AM
  #15  
jdooley's Avatar
Member
 
Joined: May 2007
Posts: 199
From: Bolton, CT
Originally Posted by willard00
haha, not a bad pricetag at all. im about 20 mins from boston so ill deffinatly look into it.
Willard, did you ever get this part from Certifit? I'm considering getting fog lights for my ride from them for $40.75 each side.
Old Jul 28, 2007 | 09:30 PM
  #16  
MaxStorm's Avatar
Senior Member
 
Joined: Jul 2007
Posts: 8,210
From: Lynchburg, VA
junkyard has always been cheap but good :] or ebay lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
Sep 2, 2021 11:03 AM
AcuraLegend
Infiniti I30/I35
10
Oct 17, 2016 08:47 PM
AcuraLegend
5th Generation Classifieds (2000-2003)
13
Sep 22, 2015 04:22 PM
sdotcarter
6th Generation Maxima (2004-2008)
2
Sep 2, 2015 09:53 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 11:45 PM.