Horn issue.. please help
#1
Horn issue.. please help
Ok so here is what happened... i hated my horn but i loved my friends horn that he has in an 89 Buick Park Avenue.. (sounds like a freight train) so i went to the wrecker and picked up 2 horns outta the same car. i tapped into the power from the horn on the passenger side grounded both new horns ( with keeping the original 2 attatched. worked great for about couple min until i went to record a video of it. Now the only horn that works is the one behind the grill. I can't find any fuses for the horns.. just a couple Relays. 3 to be exact.
Horn 1 Relay if removed kills the horn behind the grill
Horn 2 and 3 don't make a difference ... if somebody could please help me that would be great!!
btw this is 98 Nissan Max GLE
Horn 1 Relay if removed kills the horn behind the grill
Horn 2 and 3 don't make a difference ... if somebody could please help me that would be great!!
btw this is 98 Nissan Max GLE
#2
Okay so i looked around and found out that its the ANTI theft deterant Fuse that blew.. 7.5 amp fuse.. im curious can i put a 10 amp fuse in there? or will that be bad? any insite here would be much appreciated
#6
If I'm wrong apologies, but from what I gather your running 4 horns correct? if so your 4 horns are probably drawing to many AMPS for that 7.5 amp fuse, eliminate 2 factory horns and check if ur fuse blows, don't put a 10 amp fuse, fuse ratings are there for a reason-> going along with f550mara...- good luck.
#7
ok so i bought a Relay today 12 volt 30 amp has 5 connectors on it
1,2 Power to (whaterver ur powering) #87
3 Fused Power from Battery #51
4 To Switching Means #86
5 To Ground #85
now my question is.. do i top into the existing wire to my horn and hook it to the (4) then run my power wire right from battery ect......
this should... if im correct.. when i honk the horn should trip the relay and provide full 12 volt current to the 2 new horns.. and not pop my fuse for my anti theft anymore?
1,2 Power to (whaterver ur powering) #87
3 Fused Power from Battery #51
4 To Switching Means #86
5 To Ground #85
now my question is.. do i top into the existing wire to my horn and hook it to the (4) then run my power wire right from battery ect......
this should... if im correct.. when i honk the horn should trip the relay and provide full 12 volt current to the 2 new horns.. and not pop my fuse for my anti theft anymore?
Thread
Thread Starter
Forum
Replies
Last Post
SmoothMax
4th Generation Maxima (1995-1999)
5
04-29-2001 06:24 PM