DUBS on my MAX
05-17-2008, 09:53 PM
#1
DUBS on my MAX
alright guys i know you dont want to hear this but i want to throw a set of 20's on my max. will they fit? i know that a stock max can fit them but mine is on tein s tech springs and new monroe struts. for anyone that dont know its a 99
i am now trying to get out of the tuner scene after my close call to losing my license last night coming home from my second job
i am now trying to get out of the tuner scene after my close call to losing my license last night coming home from my second job
05-17-2008, 11:06 PM
#3
Member
Join Date: May 2007
Posts: 295
You will be fine.
Dont get too aggresive with the offsets.
I run 20's now on KSports, and I have them set down pretty low.
Dont get too aggresive with the offsets.
I run 20's now on KSports, and I have them set down pretty low.
05-18-2008, 08:08 AM
#4
I need centering rings for my aftermarket rims. What size is the Maxima's hub?
You can get the size of the rim bore from the wheel manufacturer. The size for a 4th gen (and I believe 5th gen) Maxima is 66.1 mm. Most aftermarket wheels are around 72-75mm. Rings cost about $5 a piece.
Tire Pressure: Where can I find the "Recommended Cold Tire Inflation Pressure" Label?
In my 1998, this is located in the arm rest between the passenger and driver seat. Pull up/Open the arm rest and the sticker label is on the part that you lift up.
Front Tire Recommended Inflation = 32
Rear Tire Recommended Inflation = 29
Also includes:
Vehicle Capacity Weight = 900 LBS.
Tire Size Dimensions = P215/55 R16 91H
Spare Tire Dimensions = T125/70 D16
What tire size can I use?
http://www.miata.net/garage/tirecalc.html
http://members.aol.com/agspeed/tiresize.htm
Aftermarket rim weights:
http://www.wheelweights.net/
I chipped/scratched my rim. How can I fix it?
There are places that refinish damages rims. It usually costs $80 or $100 a rim though. Try http://www.rimpro.com or http://www.bentrim.com or do a search on the web for 'rim repair' you will get a bunch of hits.
http://forums.maxima.org/showthread.php?t=26938
http://forums.maxima.org/showthread.php?t=56772
Can I put 20's (dubs) on my Maxima?
Yes.
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
What size bolts do I need to remove the rotors?
Front rotors: M10 x 1.25
Rear rotors: M8 x 1.25
You can get the size of the rim bore from the wheel manufacturer. The size for a 4th gen (and I believe 5th gen) Maxima is 66.1 mm. Most aftermarket wheels are around 72-75mm. Rings cost about $5 a piece.
Tire Pressure: Where can I find the "Recommended Cold Tire Inflation Pressure" Label?
In my 1998, this is located in the arm rest between the passenger and driver seat. Pull up/Open the arm rest and the sticker label is on the part that you lift up.
Front Tire Recommended Inflation = 32
Rear Tire Recommended Inflation = 29
Also includes:
Vehicle Capacity Weight = 900 LBS.
Tire Size Dimensions = P215/55 R16 91H
Spare Tire Dimensions = T125/70 D16
What tire size can I use?
http://www.miata.net/garage/tirecalc.html
http://members.aol.com/agspeed/tiresize.htm
Aftermarket rim weights:
http://www.wheelweights.net/
I chipped/scratched my rim. How can I fix it?
There are places that refinish damages rims. It usually costs $80 or $100 a rim though. Try http://www.rimpro.com or http://www.bentrim.com or do a search on the web for 'rim repair' you will get a bunch of hits.
http://forums.maxima.org/showthread.php?t=26938
http://forums.maxima.org/showthread.php?t=56772
Can I put 20's (dubs) on my Maxima?
Yes.
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
http://forums.maxima.org/showthread....ghlight=dub%2A
What size bolts do I need to remove the rotors?
Front rotors: M10 x 1.25
Rear rotors: M8 x 1.25
05-18-2008, 10:02 AM
#5
alright is says i can but i need to roll my fenders. what does that meen? does that mean the inner fender wells or the lip along the rear quarter panel.
ALSO: IF I GET DUBS I WILL GET MY IONIC DYNAMICS LIP KIT! PROBABLY TAKE OFF MY GRAPHICS TO. THEN GO FOR THAT VIP LOOK AND GET AWAY FROM THE TUNER SCENE
ALSO: IF I GET DUBS I WILL GET MY IONIC DYNAMICS LIP KIT! PROBABLY TAKE OFF MY GRAPHICS TO. THEN GO FOR THAT VIP LOOK AND GET AWAY FROM THE TUNER SCENE
05-18-2008, 12:35 PM
#6
Senior Member
Join Date: Aug 2005
Location: MASS
Posts: 856
rice to vip... not a bad switch
05-18-2008, 12:57 PM
#7
Member
Join Date: May 2008
Posts: 58
They should fit, just dont make them look to gaudy, wont look good on a Max
05-18-2008, 01:20 PM
#8
i dont think he will automaticly become "VIP" LOL but go for it man..... now i know that 17 are as big as I want to go but ive had 19s on s techs on my first 4th gen and yeah they were huge and my stance was on point but they did rub at full lock. and they made my breaks look gay and put a lot of stress on everything... everything. IMO for your car i wouldnt do chrome.... throw some mesh style wheels with a nice lip n call it a day
05-18-2008, 01:33 PM
#9
you can either go "vip" style or you can just take it easy out there and dont draw attention to yourself by throwing revs, etc. keep it at the track.
the only thing "rice-worthy" on his max is the graphics, other than that it looks like everyone elses max on the .org
the only thing "rice-worthy" on his max is the graphics, other than that it looks like everyone elses max on the .org
05-18-2008, 03:47 PM
#10
A close call? Assuming you were speeding(or doing some other illegal on-road activity), dubs arent going to get you any less attention than your current rims.
Put on some OE 17" if you want inconspicuous.
Put on some OE 17" if you want inconspicuous.
you think VIP will get you less attention?? WRONG. put your car back to stock if you want out. thats all there is to it.
05-18-2008, 08:37 PM
#12
Member
Join Date: Feb 2008
Posts: 46
I think if you removed the graphics from the car it may draw less attention. But IMO any modifications to a car will draw attention. Just depends on what you do to it, what type of people will it draw. Chrome wheels will attract people who like shiny & flashy things.
But do what makes you happy. Don't change how u want your ride to look because of some cops.
But do what makes you happy. Don't change how u want your ride to look because of some cops.
lol
05-18-2008, 08:48 PM
#14
Senior Member
Join Date: Aug 2007
Location: Staten Island,NY
Posts: 700
i cant see the graphic on your car from the sig pics but dude r u seriously from 2003 or sum? cus even guys who drive civics dont put graphics anymore. other than ur car look pretty normal. anyway as other people said do what you like and not what you will regret later on. BTW: maximas with big chrome rims are fugly in my 0pinion.
05-18-2008, 09:34 PM
#15
well guys and gals, im done goin fast. after my close call with the dumb arss in the hatch im just trying to make the max look good. i have been thinking bout buyin a set of the 7th gen 19's. i can get em(oh yeah
)
throw the lip kit on and give guys in hondas the bird for even wantin any
)throw the lip kit on and give guys in hondas the bird for even wantin any
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
magiconthetire
Audio and Electronics
2
10-26-2015 09:03 PM
maxima297
4th Generation Maxima (1995-1999)
4
09-30-2015 03:32 PM