max ride 41

iTrader: (4)

i thought it was the injector, still smelled the gas after i replaced it. so, i was at work and got a flashlight out after i started her up, facing the engine, i could see fuel dripping on the left hand side, could'nt tell if it was the rubber hose because it was wet all the way up to the metal tube and around the fitting as well. it dries up after she warms up, rubber hose???? what else could be leaking and can the metal tube going up to the rail be loose???? thanks>>>

pmohr

iTrader: (26)

Did you try tightening up the clamps for the crossover hose for the fuel rail?

max ride 41

iTrader: (4)

no actually, i have'nt. it was dark and i could'nt see them very well. i just wanted to see if it could've been something else. if that does'nt do it, where do i go next?

pmohr

iTrader: (26)

Then you look for wherever else it's leaking from

1chewabacha1

iTrader: (6)

^^^Yeap... that's pretty much all you can do... Cover it w/ JB Weld + Duct Tape.

mtrai760

iTrader: (19)

If your talking about the fitting to the fuel pressure regulator, then it could be leaking from the O-ring on the fuel rail adapter, from the regulator itself (though I would be extremely suprised) or from the fuel line.