4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

name some mufflers like g35 and 350z to replace my greddy

Thread Tools
 
Search this Thread
 
Old May 5, 2010 | 10:07 AM
  #1  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
name some mufflers like g35 and 350z to replace my greddy

styled muffler....

Getting really bored of my exhaust. I want something better and more race sounding like, kinda like that echo sound that z and a g35 make and YES before you come in a say but but but thats a vq35 its gonna sound diff, and dual exhaust. Well i know that but i want something as close as i can get that doesnt sound like the greddy styled ones. I was gonna go for the evo2 but i am afaird that will sound to ricey.

Any suggestions apreicated. Also anyone know a fix to get rid of that under car wind tunnel sound my y pipe makes? Or is that just because budget pipes are just a bunch of suck in sound?

Last edited by S1cTech; May 5, 2010 at 10:20 PM.
Old May 5, 2010 | 12:11 PM
  #2  
99BlackMaxMS's Avatar
Senior Member
iTrader: (85)
 
Joined: Jan 2007
Posts: 4,508
From: Wrentham,MA/Smithfield,RI
HKS makes a nice sounding exhaust...see my clip:

http://www.youtube.com/watch?v=_Bht_YL-UnQ

If you want a deeper sound and less rasp, get a smaller resonator or delete it completely in the B pipe.
Old May 5, 2010 | 12:51 PM
  #3  
Redline Maxima's Avatar
Senior Member
iTrader: (10)
 
Joined: Dec 2006
Posts: 690
From: Orlando, FL
i think there was a guy that put a stock g35 setup onto his 4th gen. maybe u can try that, its definitely different.
Old May 5, 2010 | 02:16 PM
  #4  
whiteSE's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2008
Posts: 2,598
From: Sacramento
Originally Posted by 99BlackMaxMS
HKS makes a nice sounding exhaust...see my clip:

http://www.youtube.com/watch?v=_Bht_YL-UnQ

If you want a deeper sound and less rasp, get a smaller resonator or delete it completely in the B pipe.
man just watching that makes me want to get a 5spd 4th gen again. its so quick on the pickup of the revs
Old May 5, 2010 | 10:19 PM
  #5  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
Originally Posted by 99BlackMaxMS
HKS makes a nice sounding exhaust...see my clip:

http://www.youtube.com/watch?v=_Bht_YL-UnQ

If you want a deeper sound and less rasp, get a smaller resonator or delete it completely in the B pipe.
hmm that does sound pretty good. Also check mine out. tell me what you think. almost wanna say it sounds close. lol


http://www.youtube.com/watch?v=9osuwSEDLos
Old May 6, 2010 | 02:13 AM
  #6  
tiresmokinV8's Avatar
Junior Member
 
Joined: May 2007
Posts: 88
From: Springfield Twp, Ohio
Wouldn't getting rid of resonators cause more rasp instead of eliminating it? Just wondering since I was planning on adding a resonator to my stillen B-pipe to get rid of the bees.
Old May 6, 2010 | 11:45 AM
  #7  
maxed_out_99's Avatar
Senior Member
 
Joined: May 2009
Posts: 1,352
From: ELGIN,IL
im impressed

Originally Posted by 99BlackMaxMS
HKS makes a nice sounding exhaust...see my clip:

http://www.youtube.com/watch?v=_Bht_YL-UnQ

If you want a deeper sound and less rasp, get a smaller resonator or delete it completely in the B pipe.
i like the way that sounds.
Old May 6, 2010 | 02:32 PM
  #8  
RA030726's Avatar
I'm nutty for Nissans
iTrader: (46)
 
Joined: Feb 2003
Posts: 9,311
Y pipes kill the sound. You need equal length pipes to get 'that' tone.

http://www.youtube.com/watch?v=t4Dm1e8YXdo
Old May 6, 2010 | 02:38 PM
  #9  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by JSutter
Y pipes kill the sound. You need equal length pipes to get 'that' tone.

]
Dude ... one of the coolest A32's I've ever heard. It was you that had pics of the OG 1st gen Stillen ... right?
Old May 6, 2010 | 06:04 PM
  #10  
RA030726's Avatar
I'm nutty for Nissans
iTrader: (46)
 
Joined: Feb 2003
Posts: 9,311
Yea I have a bunch of equal length pix. Didnt you have one? Youd think after all these years someone would have made an equal length Y again. Oh how I want one for tone alone. Supposedly my cousin talked to both Dallas and Brian years ago and there was interest. Problem is getting a test car to them and lowering cost with a group buy. Now that OBX has affordable headers its kind of a lost cause. Well even if they still make the "V2" headers. Ebay pix are not of the new design.
Old May 6, 2010 | 06:16 PM
  #11  
RA030726's Avatar
I'm nutty for Nissans
iTrader: (46)
 
Joined: Feb 2003
Posts: 9,311

Last edited by RA030726; May 6, 2010 at 06:20 PM.
Old May 7, 2010 | 02:00 AM
  #12  
std aja de's Avatar
Pixell
iTrader: (3)
 
Joined: Nov 2007
Posts: 232
From: Jakarta
Originally Posted by JSutter
hi, can you tell me where to find the equal length y pipe like in the picture? i really impressed with the design.
Old May 7, 2010 | 06:32 AM
  #13  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Stillen used to sell them, but not anymore.

Nope, I wacked a tire on the road, and the y had a small crack/leak. And it was at the time the WSP was selling big, so I bought one .

I could have just repaired the dang thing.... Now my car sounds like a dump truck..

I bought it for 250$ used about 9 years ago. Feel like
Old May 7, 2010 | 07:23 AM
  #14  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
Wait so my budget y is not equal length? Damn new news to me. I knew it was a pos.
Old May 7, 2010 | 07:47 AM
  #15  
Dave H.'s Avatar
Senior Member
iTrader: (5)
 
Joined: Jul 2004
Posts: 1,767
From: Ellensburg, Wa
Originally Posted by S1cTech
Wait so my budget y is not equal length? Damn new news to me. I knew it was a pos.
That doesn't make it a pos. It's still a good y pipe, just not equal length. The power gains are still had, but the sound isn't as good as equal length is.
Old May 7, 2010 | 07:51 AM
  #16  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
Well it sounds terrible annd the welds are noob like (i used to worksecurity for a nj state welder and hes mad good and he taught me a lil on what to look for)

Thats the only reason why i call it a pos. Just hatee the paperbag sound.
Old May 7, 2010 | 08:09 AM
  #17  
cashoit's Avatar
Senior Member
 
Joined: Sep 2009
Posts: 4,005
From: Worcester, MA
Originally Posted by JSutter
Y pipes kill the sound. You need equal length pipes to get 'that' tone.

http://www.youtube.com/watch?v=t4Dm1e8YXdo

THatsa maxi with all the trimmings. hehe
Old May 7, 2010 | 08:12 AM
  #18  
cashoit's Avatar
Senior Member
 
Joined: Sep 2009
Posts: 4,005
From: Worcester, MA
Originally Posted by S1cTech
Wait so my budget y is not equal length? Damn new news to me. I knew it was a pos.

Yo man, yours sound good. U gotta come to the maxi meets in worcester so i can hear it in person. THen u can hear mine .
Old May 7, 2010 | 08:17 AM
  #19  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
Well it sounds terrible annd the welds are noob like (i used to worksecurity for a nj state welder and hes mad good and he taught me a lil on what to look for)

Thats the only reason why i call it a pos. Just hatee the paperbag sound.
Old May 7, 2010 | 08:23 AM
  #20  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
Another equal length ypipe interest thread
Old May 7, 2010 | 08:37 AM
  #21  
tonyinfiniti's Avatar
Member
 
Joined: Feb 2010
Posts: 55
From: Jackson, WI
I have been researching f o r e v e r on a decent sounding muffler, and I think I am going to try to get a Borla XS welded up?? Just an idea for you?
Old May 7, 2010 | 08:38 AM
  #22  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by Kevlo911
Another equal length ypipe interest thread
They sell headers for cheap as puke, so... why not?
Old May 7, 2010 | 09:16 AM
  #23  
watson's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2008
Posts: 273
From: Ottawa Canada
I want equal length pipes, does anywhere sell them at all anymore? Link?
Old May 7, 2010 | 10:33 AM
  #24  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
thinking of putting a resi(like a resi ss b pipe) on my car. Has anyone ever seen proformence losses from it? I am dying to get rid of this raspy sound. Just sounds horrible. I dont hear it has as much unless I am next to something or somehing is in the pass side and can hear it.

Last edited by S1cTech; May 7, 2010 at 10:41 AM.
Old May 7, 2010 | 03:24 PM
  #25  
watson's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2008
Posts: 273
From: Ottawa Canada
Originally Posted by S1cTech
thinking of putting a resi(like a resi ss b pipe) on my car. Has anyone ever seen proformence losses from it? I am dying to get rid of this raspy sound. Just sounds horrible. I dont hear it has as much unless I am next to something or somehing is in the pass side and can hear it.
I had a 2.5" Magnaflow w/o a resonator, put on a greddy sp2 with a resonator and noticed a difference in performance, not much, but it is noticeable. I dont really care since I am going 00vi in the next few months I hated the sound of the magnaflow without a resonator, hell I hate the sound of my car right now(budget y, greddy catback). I want a equal length exhaust im very picky on tone.
Old May 8, 2010 | 11:06 AM
  #26  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
alright so SS B pipe resy it is. I wanna get rid of this crapp B pipe I have in there from a local shop anyway.
Old May 8, 2010 | 03:08 PM
  #27  
watson's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2008
Posts: 273
From: Ottawa Canada
Why not just get a resonator welded into your bpipe?
Old May 9, 2010 | 12:57 AM
  #28  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
idk, The b pipe was pressured bend. I dont like it.
Old May 9, 2010 | 10:14 AM
  #29  
watson's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2008
Posts: 273
From: Ottawa Canada
Ah okay, yea may as well upgrade than. I found my Greddy catback for $40 bucks.
Old May 9, 2010 | 10:27 AM
  #30  
aackshun's Avatar
Senior Member
iTrader: (3)
 
Joined: Aug 2007
Posts: 5,398
From: Houston, TX
Kinda not what you're looking and my answer may not help your cause...

All of this is IMHO

You're not going to get what you want with a muffler

The sound you're looking for only comes from an equal length Y (Stock or aftermarket).

The cheapest way:

http://www.youtube.com/watch?v=9RH6U_DGfvc

Stock Y + a 2.5" pipe afterwards. Add a resonator and a muffler and it'd be much more civil and pretty much achieve the SAME results. I've also heard maximas with exhaust leaks in the B-pipe sound exactly like G/Z's too.


More expensive way?

Cattman/OBX Equal length Y pipe with an aftermarket muffler (JSutter touched up on this).

Last edited by aackshun; May 9, 2010 at 10:30 AM.
Old May 9, 2010 | 11:05 AM
  #31  
watson's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2008
Posts: 273
From: Ottawa Canada
I think Y pipe, gutted cat, and Greddy SP2 will be the closest you can get without having equal length headers. Or maybe a stock muffler from a 3.5 with 2.5" piping all the way back.
Old May 9, 2010 | 06:18 PM
  #32  
S1cTech's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2007
Posts: 1,612
From: Lowell/Boston, MA
Not a noob obv but why equal length and what part is equal length on the y? Wish i knew this b4 i bought it 3 years ago.
Old Feb 14, 2012 | 04:06 PM
  #33  
carsnwomen91's Avatar
Senior Member
 
Joined: Jun 2011
Posts: 1,218
From: Mississauga, ON, CANADA
pics of equal still y pipe needed!!!

Originally Posted by S1cTech
Not a noob obv but why equal length and what part is equal length on the y? Wish i knew this b4 i bought it 3 years ago.
look at it and see whats not equal, its pretty obvious lol... anyways does anyone have pics of this y pipe? they were taken down. i wanna try and get one made by a reputable and competent exhaust shop.

if its not obvious yet, look at the first pipe compared to the second its like 2 times longer. this makes the rasp sound but makes production sooo much easier and purchasing cheaper. stupid dumbass stillen.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lowpost99
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
9
Oct 26, 2025 06:53 PM
PH98I30
4th Generation Maxima (1995-1999)
29
Feb 10, 2025 12:03 PM
mvm062
Infiniti I30/I35
3
Nov 30, 2020 09:00 AM
TheMafia
5th Generation Maxima (2000-2003)
6
Sep 4, 2015 08:26 AM




All times are GMT -7. The time now is 05:01 PM.