4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Need Help Please..!!!!!

Thread Tools
 
Search this Thread
 
Old Nov 15, 2010 | 03:47 PM
  #1  
Rktato05's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 32
From: Richmond,Va
Need Help Please..!!!!!

Hey guy i got a 95 maxima and it shaking alot when i accelerate i dont know why its only when i hit the gas to go faster

please help so i know what to fix or check

thanks
Old Nov 15, 2010 | 03:58 PM
  #2  
beegeezy's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Mar 2005
Posts: 763
From: Allen, TX
If it shakes/vibrates only when you accelerate I would check your coils, spark plugs, fuel filter, etc. Is it displaying any MIL codes?
Old Nov 15, 2010 | 04:04 PM
  #3  
RA021526's Avatar
Banned
 
Joined: May 2009
Posts: 221
ONLY when you're accelerating? NOT when you're coasting, etc?
Old Nov 15, 2010 | 04:42 PM
  #4  
Rktato05's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 32
From: Richmond,Va
naa just when i accelerate when im coasting its make a noise but no shaking and i do have the check engine on but i havnt got it check ... a friend said it probably my wheel bearing??
Old Nov 15, 2010 | 04:42 PM
  #5  
Ominous OP's Avatar
Member
 
Joined: Nov 2010
Posts: 71
From: Staten Island, New York
Have you checked your motor mounts?
Old Nov 15, 2010 | 04:48 PM
  #6  
Rktato05's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 32
From: Richmond,Va
what would i look for when i check the mounts??
Old Nov 15, 2010 | 04:50 PM
  #7  
RA021526's Avatar
Banned
 
Joined: May 2009
Posts: 221
Check your codes how to check the codes what they mean. There may be one for a misfire, which would point you in the right direction. Usually with a misfire though (or at least in my case) it was quite noticeable at low speeds/rpms and went away at higher speeds/rpms.
Old Nov 15, 2010 | 04:53 PM
  #8  
Ominous OP's Avatar
Member
 
Joined: Nov 2010
Posts: 71
From: Staten Island, New York
Originally Posted by Rktato05
what would i look for when i check the mounts??
See if the rubber is rotted between the mount and the engine or if the bolts look out of place at all like they stick out. It should all be flush. I don't know how many mounts there are but you should easily be able to check on google how many there are and where they are located.
Old Nov 15, 2010 | 05:03 PM
  #9  
Rktato05's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 32
From: Richmond,Va
thank you guys alot i will be checking all of this tomorrow
Old Nov 15, 2010 | 05:08 PM
  #10  
max ride 41's Avatar
Senior Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 6,789
From: in my max, pa. :p
rookies helpin rookies, there are 4 mounts. crossmember, passenger side, radiator, ( in front, lower middle ) and a trans mount. drivers side left. and, what makes you think a acceleration problem has to do with a mount? get the codes checked and find out what they are. dont throw money at the car, she'll gobble it up like a ho and be a money ****. trust me, 1 thing at a time, could be a maf problem or a simple throttle body cleaning. check back in when you get code"s.
Old Nov 15, 2010 | 05:11 PM
  #11  
Ominous OP's Avatar
Member
 
Joined: Nov 2010
Posts: 71
From: Staten Island, New York
Originally Posted by max ride 41
rookies helpin rookies, there are 4 mounts. crossmember, passenger side, radiator, ( in front, lower middle ) and a trans mount. drivers side left. and, what makes you think a acceleration problem has to do with a mount? get the codes checked and find out what they are. dont throw money at the car, she'll gobble it up like a ho and be a money ****. trust me, 1 thing at a time, could be a maf problem or a simple throttle body cleaning. check back in when you get code"s.
When I had my caddy, and the mounts were no good, that is exactly what used to happen the car would shake violently only during acceleration. I am not saying that is definatly what it is...just something to check.
Old Nov 15, 2010 | 05:36 PM
  #12  
Rktato05's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 32
From: Richmond,Va
thanks ....its does shake violently ima check everyone opinions tomorrow
Old Nov 15, 2010 | 06:08 PM
  #13  
Swazey's Avatar
Senior Member
 
Joined: Mar 2004
Posts: 539
From: MA
see whats throwing that check engine lite and im sure you will find what youre looking for
Old Nov 15, 2010 | 06:38 PM
  #14  
AlexShields25's Avatar
Junior Member
 
Joined: Nov 2010
Posts: 20
From: Atlanta
if it's not the motor mounts, it's one of you senors. get them checked out.
Old Nov 15, 2010 | 06:46 PM
  #15  
max ride 41's Avatar
Senior Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 6,789
From: in my max, pa. :p
Originally Posted by AlexShields25
if it's not the motor mounts, it's one of you senors. get them checked out.
lol, whats a senor??? do i even want to know???
Old Nov 15, 2010 | 06:54 PM
  #16  
AlexShields25's Avatar
Junior Member
 
Joined: Nov 2010
Posts: 20
From: Atlanta
Sensor*
Old Nov 15, 2010 | 06:54 PM
  #17  
eFLO's Avatar
Senior Member
iTrader: (2)
 
Joined: Apr 2009
Posts: 364
From: North Jersey
is the shaking/vibration felt through the steering wheel? could also be a bad axle.
Old Nov 15, 2010 | 07:01 PM
  #18  
z32drifter's Avatar
Senior Member
 
Joined: Mar 2003
Posts: 995
If you don't find faults in the ecm for missfires you may want to check the inner cv joints. A failing inner cv joint can cause a vibration when acclerating
Old Nov 16, 2010 | 07:18 AM
  #19  
Ominous OP's Avatar
Member
 
Joined: Nov 2010
Posts: 71
From: Staten Island, New York
Originally Posted by z32drifter
If you don't find faults in the ecm for missfires you may want to check the inner cv joints. A failing inner cv joint can cause a vibration when acclerating
If it's the cv joints it would make a clicking sound when you turn the wheel wouldn't it? I don't think that's what it is.
Old Nov 16, 2010 | 02:14 PM
  #20  
gt_35's Avatar
Newbie - Just Registered
 
Joined: Nov 2010
Posts: 2
hey i have a problem with my mxima it dont let me go past 2,000rpm anyone know what it chould be??????
Old Nov 16, 2010 | 03:15 PM
  #21  
luke95gxe's Avatar
Senior Member
iTrader: (4)
 
Joined: Jan 2010
Posts: 1,281
From: charlotte nc
Originally Posted by gt_35
hey i have a problem with my mxima it dont let me go past 2,000rpm anyone know what it chould be??????
maf sensor
Old Nov 16, 2010 | 03:16 PM
  #22  
luke95gxe's Avatar
Senior Member
iTrader: (4)
 
Joined: Jan 2010
Posts: 1,281
From: charlotte nc
to the op check ur passenger side cv axle mine went bad and it shook like hell when i hit the gas
Old Nov 16, 2010 | 03:17 PM
  #23  
luke95gxe's Avatar
Senior Member
iTrader: (4)
 
Joined: Jan 2010
Posts: 1,281
From: charlotte nc
Originally Posted by Ominous OP
If it's the cv joints it would make a clicking sound when you turn the wheel wouldn't it? I don't think that's what it is.
wrong they can go bad without any clicking
Old Nov 16, 2010 | 03:20 PM
  #24  
pmohr's Avatar
No more Maximas...
iTrader: (26)
 
Joined: Jul 2005
Posts: 14,329
From: Oak Ridge, TN
Originally Posted by luke95gxe
wrong they can go bad without any clicking
Indeed, a bad axle (joint, really) can cause numerous seemingly unrelated noises/feelings, a hell of a vibration on accel being one of them. There may not be any visible sign of an issue with the axle, which can lead to a hard diagnosis.

The clicking generally only occurs when the outer boot has been torn, the grease has all been slung out, and the joint has been severely worn from both metal on metal contact, and road grime/debris being introduced through the broken boot.
Old Nov 16, 2010 | 04:40 PM
  #25  
beegeezy's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Mar 2005
Posts: 763
From: Allen, TX
Originally Posted by pmohr
Indeed, a bad axle (joint, really) can cause numerous seemingly unrelated noises/feelings, a hell of a vibration on accel being one of them. There may not be any visible sign of an issue with the axle, which can lead to a hard diagnosis.

The clicking generally only occurs when the outer boot has been torn, the grease has all been slung out, and the joint has been severely worn from both metal on metal contact, and road grime/debris being introduced through the broken boot.
I would think that there would be vibration when coasting too. Maybe it depends on the severity and stage of axle failure?
Old Nov 16, 2010 | 06:44 PM
  #26  
luke95gxe's Avatar
Senior Member
iTrader: (4)
 
Joined: Jan 2010
Posts: 1,281
From: charlotte nc
Originally Posted by beegeezy
I would think that there would be vibration when coasting too. Maybe it depends on the severity and stage of axle failure?
no vibration when i coasted only when i was on the gas
Old Nov 16, 2010 | 08:55 PM
  #27  
AlexxSCM's Avatar
Senior Member
iTrader: (2)
 
Joined: Jun 2009
Posts: 8,773
From: With Wizard, my idol
wait wait wait, before any of that... when you accelerate, are YOU shaking the steering wheel violently? :/
Old Nov 16, 2010 | 09:20 PM
  #28  
max ride 41's Avatar
Senior Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 6,789
From: in my max, pa. :p
my drivers side cv boot has been ripped open and mostly dry for about 2 years. i've driven cars with both boots torn open and never fixed them and they pass inspection as well. not saying you should'nt repair, but unless its making noise, i would'bt worry too much.
Old Nov 17, 2010 | 05:19 AM
  #29  
Trini Boom's Avatar
Senior Member
iTrader: (5)
 
Joined: May 2009
Posts: 2,395
From: Brooklyn, NY
Originally Posted by alexx0108
wait wait wait, before any of that... when you accelerate, are YOU shaking the steering wheel violently? :/
Shaking the steering wheel violently?? On purpose?? Is this even possible?? I mean why would he do such thing and then say that he is feeling vibration?
Old Nov 17, 2010 | 06:53 AM
  #30  
max ride 41's Avatar
Senior Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 6,789
From: in my max, pa. :p
Originally Posted by Trini Boom
Shaking the steering wheel violently?? On purpose?? Is this even possible?? I mean why would he do such thing and then say that he is feeling vibration?
OH EL OH
Old Nov 23, 2010 | 05:34 PM
  #31  
Rktato05's Avatar
Thread Starter
Member
 
Joined: Sep 2010
Posts: 32
From: Richmond,Va
it was a bad pass axle!! ugh
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Maxxx10
7th Generation Maxima (2009-2015)
1
Sep 13, 2015 03:16 PM
Biatchzxz
5th Generation Maxima (2000-2003)
58
Oct 28, 2014 03:53 AM




All times are GMT -7. The time now is 11:03 PM.