J30 Retrofit in Progress
#41
And the light will not be tinted but you will still see yellow at the same angles you see when the lights are off.
#45
#49
#52
Thanks man
Thanks, yea I thought it would give a nice twist to the setup. Sorta like a demon eye thing but not illuminated
Thanks, yea I thought it would give a nice twist to the setup. Sorta like a demon eye thing but not illuminated
#54
#55
Yea, Im gonna splice into the parking lights and use them as day running lights
Demon Eyes are the color inside the projectors
Angel Eyes are the halos around the projectors
Angel Eyes are the halos around the projectors
#57
#61
Also... NEW PICS ON 1st PAGE!!!!
#64
Im not to sure of the actual angle. What I did was set the housings on the car and take a ruler, lay it on top of the rad support bar and use that as a guide. So I drew lines that were parallel to the rad support bar on the housings and will angle the projectors according to those.
I hope that made sense.
#65
Andrew, I'd run those wires off the top of the projector. I think it'll look much cleaner that way. Also, if you put eyelids again the little part that isn't connected on the ring won't be seen.
#66
They've been a work in progress for a long time man lol Just finished them recently. PM me and we can talk fasho.
Andrew, I'd run those wires off the top of the projector. I think it'll look much cleaner that way. Also, if you put eyelids again the little part that isn't connected on the ring won't be seen.
Andrew, I'd run those wires off the top of the projector. I think it'll look much cleaner that way. Also, if you put eyelids again the little part that isn't connected on the ring won't be seen.
I got it covered lol
#67
Since you're not gonna throw the eyelids on, take the eyelids off the corners and bake them apart to AE them. Then remove the LED's in the upper bumper grilles and get some OEM fogs. Bake open the fogs to AE them then throw some Lexus fog capsules in there. Your front end will be sooooooooooo sexy.
#68
Since you're not gonna throw the eyelids on, take the eyelids off the corners and bake them apart to AE them. Then remove the LED's in the upper bumper grilles and get some OEM fogs. Bake open the fogs to AE them then throw some Lexus fog capsules in there. Your front end will be sooooooooooo sexy.
#69
AE the corners don't smoke em. AE'd they match your retro perfectly.
#71
#74
#76
#78
#79
That's with 35W 6000K's like you'll be running. Plus, they help with overall output and intensity.
Last edited by ChrisMan287; 04-30-2011 at 09:57 PM.