4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Help with miss.

Thread Tools
 
Search this Thread
 
Old Feb 4, 2012 | 08:13 AM
  #1  
JEFF6898's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Sep 2011
Posts: 82
From: PANAMA CITY, FL
Help with miss.

Had a hard start in morning, poor acceleration, a miss and low gas mileage. So I had a full induction cleaning system done. Made a huge difference. I just bump the key in the morning and it cranks right up. Going down the road it accelerates good. Still have a miss though. Especially at idle. Had the Idle air control valve cleaned as well. Went this morning and ohm'd the coils. Here are the results any opinion if this can cause the miss?

P1, N2 0 0 0 0 0 0 positive lead pin 1 neg pin 2

N1, P2 1.93 1.95 2.03 2.10 2.22 2.25 Neg pin 1 Pos pin 2

Only codes that pull up are P0440 and P1448

Last edited by JEFF6898; Feb 4, 2012 at 08:41 AM.
Old Feb 4, 2012 | 08:33 AM
  #2  
T_Behr904's Avatar
Senior Member
 
Joined: Sep 2010
Posts: 10,344
From: Jacksonville, FL
Could possibly be an injector starting to go bad.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
A32goldylocks
4th Generation Maxima (1995-1999)
2
Sep 2, 2015 06:39 AM
gapboi210
3rd Generation Maxima (1989-1994)
10
Feb 21, 2010 02:22 PM
mr300z87
3rd Generation Maxima (1989-1994)
45
Feb 16, 2007 05:44 PM
00GLE
5th Generation Maxima (2000-2003)
9
Dec 29, 2006 04:27 PM
91WBSE
3rd Generation Maxima (1989-1994)
2
Nov 27, 2004 04:41 PM




All times are GMT -7. The time now is 09:57 AM.