Who's Really Interested In A 3" 4th Gen Catback?????
#241
I use alot of Vibrant Components myself like the heavy duty turbo-interlocked flex sections, 1" wide SS exhaust clamps, I haven't tried there resonator nor mufflers yet, they're to small....Magnaflow's lineup is unbeatable IMO and their quality and sound is awesome! My 3rd Gen also uses a MES tubing catback kit with a 4" round x 18" long x 2.5" in/out resonator inconjunction with a 5" x 11" x 22" rear muffler and there is no drone EVER! So I already know the only really growling will be @ WOT on this 4th Gen as well, I've got everything marked still bending the rear muffler hanger hooks and the final welding is close, may have to do this tomorrow....
#242
Almost ready for Vids.....Didn't get a chance to work on it today since I was putting coilovers on a 750 BMW....and the guy needed help really bad!
Gotta weld the hanger rods to the rear muffler, resonator, weld the front section and rear section @ the resonator, and I'm not sure if I want to weld the rear muffler to the ball socket flange or use a SS band clamp!
Gotta weld the hanger rods to the rear muffler, resonator, weld the front section and rear section @ the resonator, and I'm not sure if I want to weld the rear muffler to the ball socket flange or use a SS band clamp!
#246
Those of you interested please call and order your catback systems that are 2.5" anyone wanting a 3.0" will more than likely be sent a trail fitting 3" catback....here's the contact info:
Josh
Mandrel Exhaust Systems
(p) 305-378-9337
(e) info@mandrelexhaustsystems.com
(w) www.mandrelexhaustsystems.com
Josh
Mandrel Exhaust Systems
(p) 305-378-9337
(e) info@mandrelexhaustsystems.com
(w) www.mandrelexhaustsystems.com
#247
Will do once there...
#249
Do you want Josh to call you? Relax you'll get thru dude...I'm not sure if he's on vacation or not...Just call MES once you're off work and leave a detailed message......including your contact #, email, etc....
#250
Well guys! Got the hanger hooks welded on along with all the joint seams...Kinda spend money on a tip that I could have found for 30-40 online but I need a tip right then....I painted the aluminized steel and welds with Hi-temp engine paint to protect it a little longer than just being bare;
#251
NEXT 10 people get a 15% discount off the MES Catback Please read!!!!
CMax03,
Sorry for the delay.
We have the kits listed now.
www.mandrelexhaustsystems.com
http://www.mandrelexhaustsystems.com/servlet/the-Car-Exhaust-cln-Nissan-cln-
95-dsh-99-Nissan-Maxima/Categories
Feel free to paste these links in the forum. They will help generate traffic
for us...
We also created a discount code called "MAX95" which will trigger 15% off
the order when someone uses that code. The code is only active for the first
10 customers.
Thanks again for your help with this.
I did get afew emails, and waited on the reply till we had it added to our
site... They have now been replied to.
CMax03,
Sorry for the delay.
We have the kits listed now.
www.mandrelexhaustsystems.com
http://www.mandrelexhaustsystems.com/servlet/the-Car-Exhaust-cln-Nissan-cln-
95-dsh-99-Nissan-Maxima/Categories
Feel free to paste these links in the forum. They will help generate traffic
for us...
We also created a discount code called "MAX95" which will trigger 15% off
the order when someone uses that code. The code is only active for the first
10 customers.
Thanks again for your help with this.
I did get afew emails, and waited on the reply till we had it added to our
site... They have now been replied to.
#253
If I get time tonite I'll do a video...But I got a car to repair tonite! Anyone else put in an order to MES? Josh told me he responded to you guys that emailed him.....Good luck guys, I'm happy with my results thus far! Sounds really nice!
#256
REV up video!!!
http://www.youtube.com/watch?v=8N0AlhWTNfg&feature=plcp
http://www.youtube.com/watch?v=8N0AlhWTNfg&feature=plcp
#257
sounds a lot better, very similar to mine but a tad quieter. i think the flowmaster was the reason for that raspiness... now add an equal length piece to the y pipe and it'll sound like a proper vq! lol
#258
Next will be some $140 eBay headers that I'll refab for under $30....since it has a Warpseed ypipe....
#259
#260
Here are a few Cheap A$$...... super shorty headers.....Misfits more than likely but I'm willing to make them fit properly .....
http://www.ebay.com/itm/Performance-...sories&vxp=mtr
http://www.ebay.com/itm/Nissan-Maxim...sories&vxp=mtr
http://www.ebay.com/itm/STAINLESS-RA...sories&vxp=mtr
http://www.ebay.com/itm/STAINLESS-ST...sories&vxp=mtr
http://www.ebay.com/itm/Performance-...sories&vxp=mtr
http://www.ebay.com/itm/Nissan-Maxim...sories&vxp=mtr
http://www.ebay.com/itm/STAINLESS-RA...sories&vxp=mtr
http://www.ebay.com/itm/STAINLESS-ST...sories&vxp=mtr
#261
Drove the 4th Gen yesterday and the day B4, made a few adjustments due to a little heatshield interference and everything is much quieter than the flowmaster/Noisemaster setup it previously had.....and the soot isn't fully coated on the interior of the catback yet...Gotta get a new O2 sensor....on catback picked up one from the boneyard and it is now causing a code, So I'll need to purchase a new O2 sensor.....The part throttle sensitivity has increase and I'll probably invest in some spacers, coilpacks, IACV, E3 spark plugs and a little bit of port matching......
#264
#265
#267
I said I was interested before and am waiting to order but should be shortly. Just to clarify, I CAN get the 3" in T-304? and did you mention the price of it previously and I just forgot. If you prefer to discuss over PM we can do it that way but I figured you would want question/answers on here for future readers
#268
#269
Yea they do if you do the screw reset.....at least I hope they do or I will feel like an idiot. I have always thought they did but thinking about it now I am not quite sure where I got that info.......
#270
00-01 5th gen ecus work the same way ours does (same logic... or lack thereof).
My 99 would misfire @ WOT for some time until it became adjusted to things.
Then again this only applies if you have O2 sensors....
As for the pedal movement.... he's mainly talking about the more availability of power with less pedal movement aka power increased via a catback that makes power and not just noise.
#271
Takes 50+ miles.
00-01 5th gen ecus work the same way ours does (same logic... or lack thereof).
My 99 would misfire @ WOT for some time until it became adjusted to things.
Then again this only applies if you have O2 sensors....
As for the pedal movement.... he's mainly talking about the more availability of power with less pedal movement aka power increased via a catback that makes power and not just noise.
00-01 5th gen ecus work the same way ours does (same logic... or lack thereof).
My 99 would misfire @ WOT for some time until it became adjusted to things.
Then again this only applies if you have O2 sensors....
As for the pedal movement.... he's mainly talking about the more availability of power with less pedal movement aka power increased via a catback that makes power and not just noise.
I have 02's
#273
I said I was interested before and am waiting to order but should be shortly. Just to clarify, I CAN get the 3" in T-304? and did you mention the price of it previously and I just forgot. If you prefer to discuss over PM we can do it that way but I figured you would want question/answers on here for future readers
Takes 50+ miles.
00-01 5th gen ecus work the same way ours does (same logic... or lack thereof).
My 99 would misfire @ WOT for some time until it became adjusted to things.
Then again this only applies if you have O2 sensors....
As for the pedal movement.... he's mainly talking about the more availability of power with less pedal movement aka power increased via a catback that makes power and not just noise.
00-01 5th gen ecus work the same way ours does (same logic... or lack thereof).
My 99 would misfire @ WOT for some time until it became adjusted to things.
Then again this only applies if you have O2 sensors....
As for the pedal movement.... he's mainly talking about the more availability of power with less pedal movement aka power increased via a catback that makes power and not just noise.
#274
#277
I'll recommend you get the biggest muffler you can install at both the resonator and rear muffler locations! 3" exhaust on N/a cars are a little more in volume than most of us know or are use too! Bigger mufflers = quieter riding!
#278
My car is far from N/A I just realized that I can't reuse my resonators and muffler, brain fart lol. I love the sound of my old world speed. I'll figure something out. I have a lot of things to do before I can mess with the exhaust. I have the headers and fastcat on so far though. I have two resonators on my world speed. I can't remember but I think it was over 3 ft. of just resonator, sounded so good! And that was a cali spec with ws y-pipe and hai. From that experience I know this engine can sound beyond good and I was itchin for a 3" ever since.
#279
My car is far from N/A I just realized that I can't reuse my resonators and muffler, brain fart lol. I love the sound of my old world speed. I'll figure something out. I have a lot of things to do before I can mess with the exhaust. I have the headers and fastcat on so far though. I have two resonators on my world speed. I can't remember but I think it was over 3 ft. of just resonator, sounded so good! And that was a cali spec with ws y-pipe and hai. From that experience I know this engine can sound beyond good and I was itchin for a 3" ever since.