4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

bad ecu? wont complete self emissions tests

Thread Tools
 
Search this Thread
 
Old Mar 10, 2014 | 08:07 PM
  #1  
ADROX's Avatar
Thread Starter
Member
 
Joined: Feb 2012
Posts: 129
From: MAGNOLIA TX
bad ecu? wont complete self emissions tests

my 96 maxima automatic will not finish its self emissions testing. I have drove it thousands of miles so thats not the problem. there are four tests that will not complete. the evap, o2, catalyst and egr tests all show not ready even took it to get inspected with emissions and failed because of the uncompleted self emission testing. I also have the 1320 code related to coil packs but have had a set of hanshins and nissan in it, new ngk plugs and fixed a handful of vacuum leaks along with a couple other parts that were questionable such as the ignition condensor (looked burnt). is it possible that either the lack of completed tests throw the code or the fact of having the code wont allow it to finish testing? the ses light did go off one evening when the girlfriend was in it but of course came back on when she restarted it. it would also chug pretty bad when put into rverse gear only, that has gotten alot better since I fixed the 4 or 5 vacuum leaks. Seldom does it now and not near as noticable but if I clear the code with my scanner it 99% of the time will turn on the light when it does the miss or chug in reverse. just at a loss. have tested numerous sensors related to the code also and everything has checked out to specs. PLEASE HELP!

Last edited by ADROX; Mar 10, 2014 at 08:10 PM.
Old Mar 10, 2014 | 08:48 PM
  #2  
Quickywd01's Avatar
Senior Member
iTrader: (16)
 
Joined: May 2007
Posts: 3,078
From: NorthernNJ
How are your oxygen sensors looking?
Old Mar 10, 2014 | 10:28 PM
  #3  
schmellyfart's Avatar
Senior Member
iTrader: (46)
 
Joined: Jan 2009
Posts: 3,816
From: AZ
Driving thousands of miles ≠ drive cycle
Old Mar 11, 2014 | 05:02 AM
  #4  
ADROX's Avatar
Thread Starter
Member
 
Joined: Feb 2012
Posts: 129
From: MAGNOLIA TX
replaced the front o2 sensor when I first got the car because it had a code for it which went away afterwards. always had the 1320.
anyone know what the nissan drive cycle is? a link possibly?
Old Mar 11, 2014 | 05:52 AM
  #5  
njmaxseltd's Avatar
Member who somehow became The President of The SE-L Club
iTrader: (19)
 
Joined: Jun 2001
Posts: 16,024
You've got to fix the 1320 code.
Old Mar 11, 2014 | 10:57 AM
  #6  
ADROX's Avatar
Thread Starter
Member
 
Joined: Feb 2012
Posts: 129
From: MAGNOLIA TX
So the 1320 code wont let the car perform its emission testing? What kinda crap is that? Lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
Sep 2, 2021 11:03 AM
pktaske
6th Generation Classifieds (2004-2008)
1
May 6, 2016 07:49 AM
dcam0326
General Maxima Discussion
4
Sep 8, 2015 11:02 PM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM
DrVee
8th Generation Maxima (2016-)
7
Sep 4, 2015 12:18 PM




All times are GMT -7. The time now is 07:07 PM.