Gen 4 Fog Light Install - Help
#1
Gen 4 Fog Light Install - Help
I have a 97 GXE that came WITHOUT fog lights, but I would like to add some factory (salvage) fog lights. I was happy to notice the wiring harness for fog lights is already there from the factory; they just bundled up the unused electric leads with electrical tape and tucked them in there. If I install the factory brackets and lights, then plug in these leads, will I get lights, or do I still need to add a switch to give them power or on/off capability? These current leads branch off the wiring going to the turn signals. I believe the cars that came with fog lights had an added switch included on the regular light control stalk. I don't need to re-do that stalk... actually I'd be happy to have the fog lights on anytime the headlights were on. Anybody that can help me, much appreciated.
Last edited by thankumuch; 09-17-2016 at 12:47 PM.
#2
Same question came up about a month ago, and many times before.
Curious, do you know how to use the Advanced Search function here on the Org? It's a great tool to use.
Here's the recent thread. Answer is in post #2.
https://maxima.org/forums/4th-genera...-prewired.html
Curious, do you know how to use the Advanced Search function here on the Org? It's a great tool to use.
Here's the recent thread. Answer is in post #2.
https://maxima.org/forums/4th-genera...-prewired.html
#3
When nobody responded I started searching and found some answers, but in all that, no one made real clear how to tap into the marker light wiring, i.e. if I power fogs off that wiring, instead of the signal stalk. What color wire gets spliced into what color wire, etc. Apologies if this is a common question, but I'm not finding an answer.
#4
When nobody responded I started searching and found some answers, but in all that, no one made real clear how to tap into the marker light wiring, i.e. if I power fogs off that wiring, instead of the signal stalk. What color wire gets spliced into what color wire, etc. Apologies if this is a common question, but I'm not finding an answer.
If you dont feel like getting the stalk your best bet is to go to the link wizard referred to.
Note: my car was not prewired at all and i used the info in the thread wizard posted and i have foglights wired independently to a switch i can turn on and off whenever and it was fairly simple using the wiring diagram
#5
When nobody responded I started searching and found some answers, but in all that, no one made real clear how to tap into the marker light wiring, i.e. if I power fogs off that wiring, instead of the signal stalk. What color wire gets spliced into what color wire, etc. Apologies if this is a common question, but I'm not finding an answer.
Thread
Thread Starter
Forum
Replies
Last Post
DuaLMaGz
6th Generation Classifieds (2004-2008)
4
03-22-2019 01:19 PM
chevyman1980
4th Generation Maxima (1995-1999)
1
07-06-2016 06:54 PM
specfiji
6th Generation Maxima (2004-2008)
0
07-03-2016 03:42 PM
maxima2fst4u
4th Generation Maxima (1995-1999)
4
07-02-2016 07:20 PM