engine shaking like misfire, gas smell, no code yet
Senior Member
Joined: Oct 2012
Posts: 2,974
From: Portland, Oregon
Update: mechanic put new intake manifold gasket for free and 2 remaining rear injectors. I payed $150 for 2 injectors. He also said he replaced the MAP sensor, which parts and labor cost $180.
The car runs good now though atm, hopefully nothing breaks again. I will have to replace the front injectors next. He said parts and labor will cost $300. I'm not sure I would be able to do it myself, and save like $100.
The car runs good now though atm, hopefully nothing breaks again. I will have to replace the front injectors next. He said parts and labor will cost $300. I'm not sure I would be able to do it myself, and save like $100.
They will rebuild them for you for around 75 dollars. Total. That includes shipping both ways.
You would save 225 dollars.
Thats why Wizaed told you to do them yourself.
The injectors will fail soon. It's time.
Senior Member
Joined: May 2012
Posts: 1,622
From: Long Island
If you can use a screw driver, you can easily do the front 3 injectors!
Here's what I suggest... Buy a kit of six rebuilt and MATCHED OEM injectors from MotorMan Fuel Injection. $125 on eBay. Do the front three yourself and you don't have to send your old ones anywhere and no down time sending them out to be rebuilt.
Keep the remaining three because you don't have a clue what the mechanic used. But all I can say about the majority of new aftermarket CHINESE injectors is that they are garbage, and are cheap and that means profit for mechanics.
Get six of these: NIssan 16635-53J00
And one of these: FEL-PRO ES71045
And you will have everything to make the injectors and installation like brand new.
Time to get your hands dirty!
A JIS #2 Philips screwdriver will help as well. Vessel makes good ones on Amazon!
Here's what I suggest... Buy a kit of six rebuilt and MATCHED OEM injectors from MotorMan Fuel Injection. $125 on eBay. Do the front three yourself and you don't have to send your old ones anywhere and no down time sending them out to be rebuilt.
Keep the remaining three because you don't have a clue what the mechanic used. But all I can say about the majority of new aftermarket CHINESE injectors is that they are garbage, and are cheap and that means profit for mechanics.
Get six of these: NIssan 16635-53J00
And one of these: FEL-PRO ES71045
And you will have everything to make the injectors and installation like brand new.
Time to get your hands dirty!
A JIS #2 Philips screwdriver will help as well. Vessel makes good ones on Amazon!
Thread
Thread Starter
Forum
Replies
Last Post
