Q? About Tightening Spark Plugs..
05-03-2002, 06:33 PM
#2
Re: Q? About Tightening Spark Plugs..
Originally posted by fdxsiboy
Since I don't have a torque wrench, how should tight should I go when tightening them? Thx.
Since I don't have a torque wrench, how should tight should I go when tightening them? Thx.
05-03-2002, 07:23 PM
#3
Member
Thread Starter
Join Date: Dec 2001
Posts: 76
Re: Re: Q? About Tightening Spark Plugs..
Thx for your advice...
Originally posted by Jime
About as tight as you can tighten them with a 3/8 ratchet with one hand, with your hand positioned over the end of the ratchet. ie closest to the extension so you have minimum torque. I have used this technique for years with 2 strokes, which have been pretty much aluminum since the 70's. Once you get a feel for it or use a torque wrench a couple of times its pretty easy. However, if you have a strong arm and pop bolts all the time don't do it, get a torque wrench.
About as tight as you can tighten them with a 3/8 ratchet with one hand, with your hand positioned over the end of the ratchet. ie closest to the extension so you have minimum torque. I have used this technique for years with 2 strokes, which have been pretty much aluminum since the 70's. Once you get a feel for it or use a torque wrench a couple of times its pretty easy. However, if you have a strong arm and pop bolts all the time don't do it, get a torque wrench.
Thread
Thread Starter
Forum
Replies
Last Post
Need help
5th Generation Maxima (2000-2003)
23
10-02-2015 08:56 AM